Author Topic: Energy from the Ground - Self powered generator by Barbosa and Leal (Read 1745740 times)

wistiti · « **Reply #1080 on:** March 31, 2015, 07:22:55 PM »

Hi guys!
One other question.
What is the spect of the ground rod (lenght, diameter and material...)
Thank again!

Clarence · « **Reply #1081 on:** March 31, 2015, 09:09:45 PM »

Quote from: wistiti on March 31, 2015, 07:22:55 PM

Hi guys!
One other question.
What is the spect of the ground rod (lenght, diameter and material...)
Thank again!

Hello wistiti,

glad to answer sir,

the rods are called copper bonded ground rods.
they are 8 foot long.
they are 5/8 inch diameter.
any local hardware should stock them.

you will need to get one of the brass oblong 5/8 diameter wire clamps to go with each rod.

I have attached a photo to show what I am doing with them.

cheers

Clarence

wistiti · « **Reply #1082 on:** April 01, 2015, 03:45:46 AM »

Thank you Clarence!
Again, it is a clear answer.

Where I live (Canada) we have to wait until the end of April, maybe May before the snow leaves the ground...
But I learn by building and I will surely give it a try!
Please continue to let us know about your findings.
Sincerly!

Enjoykin · « **Reply #1083 on:** April 02, 2015, 05:47:21 AM »

Hello old man Clarence

What a nice copper rods for primary of Big Tesla Transformer.

Why don't you build one, and make Lahovsky coil for health treatment !!

You are really prospecting for Tesla Telluric Currents isn't you?? Is it your case i think you shoud break symmetry of equidistant potentials in Iowa ground. Simple - spark it up - spark ground - strike it strongly !!

Make a strong arc sparks using welding machine and see yourself. This is a real setup of professional welder with his experiment in which he was shocked with very high current keeping in one of his hands heavy amps welding cable well insulated while sparking transformer with other hand(glove) with welding electrode. Current shock has blocked his arm long time after strike. He has lucky and his both arms are OK.

In my oppinion Barbosa and Leal for sure have some kind of spark gap/s and for sure did high voltage or high current sparking of their Tor transformer. Try it maybe you have a luck !!

ps: Don't keep heavy amps cable in your hands !!

Regs from Russia.
Enjoykin

Clarence · « **Reply #1084 on:** April 02, 2015, 11:18:27 AM »

Quote from: Enjoykin on April 02, 2015, 05:47:21 AM

Hello old man Clarence

What a nice copper rods for primary of Big Tesla Transformer.
Why don't you build one, and make Lahovsky coil for health treatment !!

You are really prospecting for Tesla Telluric Currents isn't you?? Is it your case i think you shoud break symmetry of equidistant potentials in Iowa ground. Simple - spark it up - spark ground - strike it strongly !!

Make a strong arc sparks using welding machine and see yourself. This is a real setup of professional welder with his experiment in which he was shocked with very high current keeping in one of his hands heavy amps welding cable well insulated while sparking transformer with other hand(glove) with welding electrode. Current shock has blocked his arm long time after strike. He has lucky and his both arms are OK.

In my oppinion Barbosa and Leal for sure have some kind of spark gap/s and for sure did high voltage or high current sparking of their Tor transformer. Try it maybe you have a luck !!

ps: Don't keep heavy amps cable in your hands !!

Regs from Russia.
Enjoykin

HA! HA! HA!

1. their is absolutely NO spark gap nor ANY necessity for one in this build.

2. I have SUCCESS in this build their is no need for any waste such as so called luck.

3. I am presently using my build to power some of my common house hold appliances that I choose!

NUFF

Clarence

Clarence · « **Reply #1085 on:** April 02, 2015, 11:46:39 AM »

Quote from: Clarence on March 31, 2015, 09:09:45 PM

Hello wistiti,

glad to answer sir,

the rods are called copper bonded ground rods.
they are 8 foot long.
they are 5/8 inch diameter.
any local hardware should stock them.

you will need to get one of the brass oblong 5/8 diameter wire clamps to go with each rod.

I have attached a photo to show what I am doing with them.

cheers

Clarence

Hello wistiti,

by the way, I forgot to mention to you that the small dirt trail that you see in the photo I showed to you is a small
3/4 inch by 4 inch trench to bury the connecting wire in after attaching it with the ground clamp and then finishing
driving the rod and attached wire down into the 12 inch hole I made at each rod location. that way I have the tops of the rods
4 to 6 inches below the surface of the ground and they are never in the way! then I just scoot the dirt pile into the hole to finish each location.

the MAIN enjoyment I had in doing all of this preparation for rod installation was using my sons small TROY BUILT electric tiller with just one tiller blade
left on it to make that slit for the wire to go into --------and I USED MY POWER UNIT TO POWER THE TILLER UNIT and I was laughing all the time
I was doing it!!!!!!!!!!!! NO PROBLEM DOING SO AT ALL!!!!!!! HA! HA! HA! OH the JOY of it!!!!

thanks and cheers!

Clarence

lasersaber · « **Reply #1086 on:** April 02, 2015, 01:09:02 PM »

Hi Clarence,

Thanks for sharing such clear information about your test setup. I have been following this thread closely and with great interest. I plan on testing this setup myself as soon as I can find the time. The information you have provided will be very helpful.

Best Regards,
LS

Clarence · « **Reply #1087 on:** April 02, 2015, 03:12:16 PM »

Quote from: lasersaber on April 02, 2015, 01:09:02 PM

Hi Clarence,

Thanks for sharing such clear information about your test setup. I have been following this thread closely and with great interest. I plan on testing this setup myself as soon as I can find the time. The information you have provided will be very helpful.

Best Regards,
LS

Hello Lasersaber,

you are definitely NOT an unknown AND an appreciated fellow that I have admired and followed for years. you have been demonstrative and successful in a mega of useful devices that I have witnessed!
the most encouraging thing about this device is that it just simply works.
within a week I should have finished my new rods and subsequent testing in this 120 v mode.
next I will adapt it to a 120/240v mode for practical residential usage. then I will build and display some larger Capture modules for more KW usage.
A main basic appeal of this unit is that it is just low voltage 50/60 HZ international application----something that ALL the world can use for a change.

Although its on the B&L thread I would really like to get away from that terminology and name it EGS-PEG ...........EarthGroundSelfPoweredElectricalGenerator (also EX_PECt to get something
out of it HA! HA! )
no mans names involved including my own.

when ever you decide you want to replicate or better it, you simply jump on it! you will never see any tears in my eyes or frown on my face!
I rather hope ALL members will do it!

in the meantime I value your support Sir!
BTW: I remember "the Good Doctor: Lirpa Sloof" HA! HA!

Clarence

cheors · « **Reply #1088 on:** April 02, 2015, 03:50:24 PM »

Hi Clarence
Great job. Thanks for all your explanations.

Do you think that we can use 750W microwave oven transformers instead of your toroids ?(300W)

Clarence · « **Reply #1089 on:** April 02, 2015, 04:28:59 PM »

Quote from: cheors on April 02, 2015, 03:50:24 PM

Hi Clarence
Great job. Thanks for all your explanations.

Do you think that we can use 750W microwave oven transformers instead of your toroids ?(300W)

Hello cheors & ALL,

to be blunt - NO! been there done that!!!! P-POOR results!!!!!

The BEST AND ONLY GOOD RESULTS nowdays strictly come from using ferrite toroid transformers.
I have noticed on this thread that MANY members want to try to use a heapy-cheapy way real quick to try and "GET SOMETHING DONE" .
all they accomplish is shooting themselves in the "FOOT"!!!!!!

It is NOT " my way or the highway attitude " is simply a case of reality!!!!

the INHEIRENT values within the ferrite toroid IS what produces the RESULTS everyone is looking for!!!!
I just can not seem to get the point across to members for some reason.... its beyond me why?

B&L THEMSELVES used a TOROID even though at first it was a salvaged IRON core toroid they then wound themselves!!!!!

PURPOSELY I have stayed as exactly as close as I could get to B&L's desisgn so I could achieve like results!! AND I have.
stay as very close to my unit and you will have their same results!!!! deviate as you will and know you are going to have the effect of SHOOTING
YOURSEL IN THE FOOT!!!!!

Whatever! HOWEVER I am mindful that you ASKED! and that is the reason I have been BLUNT! I would ALWAYS rather try to HELP someone who asks for help.

thanks to you sir and cheers!

Clarence

Enjoykin · « **Reply #1090 on:** April 02, 2015, 05:25:47 PM »

Quote from: Clarence on April 02, 2015, 11:18:27 AM

HA! HA! HA!

1. their is absolutely NO spark gap nor ANY necessity for one in this build.

2. I have SUCCESS in this build their is no need for any waste such as so called luck.

3. I am presently using my build to power some of my common house hold appliances that I choose!

NUFF

Clarence

Hello old man

HA HA !!

Loop it - Loop your build without accum.battery and battery charger. Show us OU !!

Rectify output and power-up your inverter !! Show us Self-Runner - and you will be OU-Hero in Iowa and U.S.

Record a video of your build.

If you are using your accum.batterfy how much long can your build run with maximum load ??
1hour ?? 10 hours ?? 31 days ??

Reg.

ramset · « **Reply #1091 on:** April 02, 2015, 05:48:25 PM »

Clarence,
Yes please try to loop or not be attached to your house mains in any way.
I had an experience several years back with an open source OU water heater project [sonic boiler]
which I could not get working properly I was doing a verification/replication for some one in Europe and then he told me I had to put outside ground rods like you are doing ,but one side connected to
my house mains.

I had a very bad feeling that this was not really OU and dropped that path.

seemed like I was actually doing something like this,

https://en.wikipedia.org/wiki/Single-wire_earth_return

as I recall he told me to wet the ground rods too..

if it turns out you are truly tapping energy that no one else is paying for
I will share the details of that experiment here [MUCH simpler]

??
respectfully
ChetKremens@Gmail.com

e2matrix · « **Reply #1092 on:** April 02, 2015, 05:54:15 PM »

Quote from: Clarence on April 02, 2015, 04:28:59 PM

Hello cheors & ALL,

to be blunt - NO! been there done that!!!! P-POOR results!!!!!

The BEST AND ONLY GOOD RESULTS nowdays strictly come from using ferrite toroid transformers.
I have noticed on this thread that MANY members want to try to use a heapy-cheapy way real quick to try and "GET SOMETHING DONE" .
all they accomplish is shooting themselves in the "FOOT"!!!!!!

It is NOT " my way or the highway attitude " is simply a case of reality!!!!

the INHEIRENT values within the ferrite toroid IS what produces the RESULTS everyone is looking for!!!!
I just can not seem to get the point across to members for some reason.... its beyond me why?

B&L THEMSELVES used a TOROID even though at first it was a salvaged IRON core toroid they then wound themselves!!!!!

PURPOSELY I have stayed as exactly as close as I could get to B&L's desisgn so I could achieve like results!! AND I have.
stay as very close to my unit and you will have their same results!!!! deviate as you will and know you are going to have the effect of SHOOTING
YOURSEL IN THE FOOT!!!!!

Whatever! HOWEVER I am mindful that you ASKED! and that is the reason I have been BLUNT! I would ALWAYS rather try to HELP someone who asks for help.

thanks to you sir and cheers!

Clarence

Good stuff Clarence - love the replies and your mindset on all this. It is likely a good part of why you are having success with this.
A little thought on putting those copper rods in the ground .... Not sure how you are getting them into the ground unless it is with your farm machinery but the last time I put an 8 foot rod in ground it took me an hour of pounding with a 6 pound sledge. One suggestion I was able to use another time may help as long as you have a good water supply (I didn't have that when I had to pound it into the ground) : get a 8 or 10 foot piece of 3/4" sch. 40 pvc pipe and PVC glue adapters on it so you can attach it to a hose. Put a cap on the other end with a hole in it (or you may try without one) and turn on the hose full pressure to make yourself a water drill. It worked quite well the time I tried it. Forget it though if you are in California

Enjoykin · « **Reply #1093 on:** April 02, 2015, 06:06:25 PM »

Hey old man Clarence !!

This is a snapshoot from video i have took last year from Tube from some Serbian guy who has succesfully replicated Barbosa and Leal OU-generator. He got OU 43. I took 4 videos. His channel was wiped-out very soon after his last video. What's happened with him i don't know. Maybe he was also wiped.

This is his explanation about Barbosa transformer.:

"Heating via Barbosa transformer. Heater power is 2150W and consumption from the mains 49.5 W. Note that the scalar reverse Tesla coil and the impact on the climate and the living world around him, not yet examined. This scalar device draws free electrons from the land and resonance multiply their number by the rising strength of the stretch marks on the output device. "

He used only one big Ferrite Tor transformer.

Old man why don't you try his setup ??

ps: Looking this and many similar buids i thinik that Oz-guy Chris Sykes (hyiq.org) was right about opposite coils (partnered coils) in his explanation as a source of Scalar Magnetic Field. 2nd field was officialy classified as secret - because is a SOURCE OF FREE ENERGY. Remember that Professor Stevan Marinov has been killed in Austria few days before International conference in Germany about Scalar Fields and presentation of his OU-Marinov motor.

ps2:
What is very interesting is 100% builds use ferrite transformers - many Tor shape and others EI shape. Does it work with soft iron, steel, copper, bronze, silver, gold and other metals - instead ferrite cores ??

Barbosa and Leal generator - 4 videos for analysis
Размер: 98.20 Мб
Доступен до: 2015-05-02 19:25:59
Ссылка для скачивания файла:
http://rusfolder.com/43367351

mrzlica · « **Reply #1094 on:** April 02, 2015, 06:15:56 PM »

Hi Enjoyjin!

This is not true , the man did a false power reading.

I know people visit him, leavingthe place with long face!
Ther was no loop device in Serbia, this particular you are showing was not!
He wipe the channel because it was not a working one.
Regards

News:

User Menu

Author Topic: Energy from the Ground - Self powered generator by Barbosa and Leal (Read 1745740 times)

wistiti

Re: Energy from the Ground - Self powered generator by Barbosa and Leal

Clarence

Re: Energy from the Ground - Self powered generator by Barbosa and Leal

wistiti

Re: Energy from the Ground - Self powered generator by Barbosa and Leal

Enjoykin

Re: Energy from the Ground - Self powered generator by Barbosa and Leal

Clarence

Re: Energy from the Ground - Self powered generator by Barbosa and Leal

Clarence

Re: Energy from the Ground - Self powered generator by Barbosa and Leal

lasersaber

Re: Energy from the Ground - Self powered generator by Barbosa and Leal

Clarence

Re: Energy from the Ground - Self powered generator by Barbosa and Leal

cheors

Re: Energy from the Ground - Self powered generator by Barbosa and Leal

Clarence

Re: Energy from the Ground - Self powered generator by Barbosa and Leal

Enjoykin

Re: Energy from the Ground - Self powered generator by Barbosa and Leal

ramset

Re: Energy from the Ground - Self powered generator by Barbosa and Leal

e2matrix

Re: Energy from the Ground - Self powered generator by Barbosa and Leal

Enjoykin

Re: Energy from the Ground - Self powered generator by Barbosa and Leal

mrzlica

Re: Energy from the Ground - Self powered generator by Barbosa and Leal