Author Topic: Captret - Capacitor and Electret (Read 322645 times)

Groundloop · « **Reply #180 on:** December 15, 2010, 07:20:40 AM »

Stefan,

I'm using a silver based conducting glue from Circuit Works called CW2200STP.
The glue dries in minutes at room temperature. It is also solderable at low temps.

Yesterday I connected a 1uF (low loss MMK capacitor) to the 100 capacitor board.
This morning the capacitor had been recharged to 2,8 Volt. Tested power by connecting
a LED over the capacitor. The LED did blink once. This confirms that the the self
charge effect in electrolytic capacitors is real and can provide power.

This is the first free energy (although very low energy) device I have seen in my 10
years of research. So now I need to solder 9 more boards to be put in parallel to
increase the current output. This will take some time because the job of soldering the
capacitors takes 4 solder pr. capacitor. So one board with 100 capacitors is 400
solder joints. It is a boring and slow process to solder those boards. :-(

Alex.

tak22 · « **Reply #181 on:** December 15, 2010, 07:49:32 AM »

Impressive perseverance, for the 1,000s of solder joints for this project, and the
10 years of effort and assistance to others!

Quote from: Groundloop on December 15, 2010, 07:20:40 AM

This is the first free energy (although very low energy) device I have seen in my 10
years of research.

Hey, I need the solder practice so I guess I better order up a few hundred boards and a
truckload of capacitors. Can I use a larger cap value and lessen the work?

tak

Groundloop · « **Reply #182 on:** December 15, 2010, 09:08:01 AM »

@tak22,

I will not rekomend to people all this work and cost. :-)

I think we will get much higher energy if we make the capacitors ourself.
One way to do it to use rolls of aluminium and rolls of paper in a 10 liter
panit can. The electrolyte can be Glycol (anti freez for cars). Please
read the thread over at EF forum:
http://www.energeticforum.com/renewable-energy/6684-captret-perpetual-light-dead-batteries.html

Groundloop.

SchubertReijiMaigo · « **Reply #183 on:** December 15, 2010, 11:18:34 AM »

I have read the whole topic: interesting effect, it seems the energy from the captret is complety radiant, load running cold, capacitor not heat, self recharching. Radiant energy is manifested when PF is 0, so you have pure Voltage or pure Current. This is called also cold electricity, curiously this is very close to the Rotoverter anomaly, and LCR resonance in AC system...
Radiant energy can perform work if well tuned. The pure Voltage can charge capacitor and perform work, the pure current can magnetize an inductor without voltage, this is the secret of FE, power factor = 0 can perform work...
I think we rediscover the Tesla work's and theories 100 years ago, we have lost 100 years of scientific research...

One bemol: can anyone verify if you don't destroy the electrolite by a classical chimical reaction using the capacitor in this way ?

ibpointless2 · « **Reply #184 on:** December 16, 2010, 03:44:48 AM »

For those that are experiencing the self charging effect with your batteries I think there might be a simple explanation as to why its happening. Well i wouldn't call it a simple explanation but I'll give a simple demonstration. The explanation or demo is simple but as to why is not so simple.

I'll post a video as to what i mean. I've been running a test since October and many of you might be surprised as to what is happening.

Please stay tuned to http://www.youtube.com/user/ibpointless2

The video will be called the secret behind the self charging captret.

Let me know what you think.

nievesoliveras · « **Reply #185 on:** December 16, 2010, 01:08:31 PM »

If the positive lead from the meter has been there since that date, that is the source of the energy that feeds the capacitor to charge the battery.

The meter has a 9 volt battery inside.

ibpointless2 · « **Reply #186 on:** December 16, 2010, 01:43:53 PM »

Quote from: nievesoliveras on December 16, 2010, 01:08:31 PM

If the positive lead from the meter has been there since that date, that is the source of the energy that feeds the capacitor to charge the battery.

The meter has a 9 volt battery inside.

The meter is never left connected to the setup. The setup has been sitting closed up in that cardboard box since October 28 2010. I know better to leave a meter connected to a setup as it could lead to false results.

It is what it is, a self charging battery with only a capacitor hooked up. You can try it yourself if you want, 9 volts work better than any other battery due to their low power they hold (faster charging). Mine started out at 7.90 and i was able to see 7.91 after a few days. Make sure to use a battery that has been sitting not hooked up to anything for at least 24 hours so that you can get a good standing voltage.

nievesoliveras · « **Reply #187 on:** December 16, 2010, 01:47:32 PM »

Accept my apologies!

Jesus

ibpointless2 · « **Reply #188 on:** December 16, 2010, 01:59:33 PM »

Quote from: nievesoliveras on December 16, 2010, 01:47:32 PM

Accept my apologies!

Jesus

Its ok, I didn't mean sound rude i was just merely telling you how i have it setup.

Have a good day.

nievesoliveras · « **Reply #189 on:** December 16, 2010, 02:14:34 PM »

Is this correct?

Groundloop · « **Reply #190 on:** December 16, 2010, 02:17:06 PM »

@ibpointless2,

My tests with a 8,4 Volt 160mAh NiCad battery confirms you findings.
I started out with 7,36 Volt in the battery on 15/11-2010 and the voltage
did stop climbing on 21/11-2010 at 7,64 Volt. The voltage climb was
fast at the beginning and then slower and slower as time did go by.

I'm currently running a test where I have connected my 100 capacitor board
via a Germanium diode to a 1,2 Volt 700mAh NiCad battery.

[EDIT] NiCad charge test started 16/12-2010 at 1407, battery rest voltage was 1,135 Volt.

@nievesoliveras

Only time will tell if this works or not.

Groundloop.

nievesoliveras · « **Reply #191 on:** December 16, 2010, 02:26:51 PM »

@groundloop

We expect that your work efforts will be crowned with a big success!

Jesus

ibpointless2 · « **Reply #192 on:** December 17, 2010, 12:08:59 AM »

Quote from: nievesoliveras on December 16, 2010, 02:14:34 PM

Is this correct?

Yes, its that simple.

nievesoliveras · « **Reply #193 on:** December 17, 2010, 01:28:07 AM »

Thank you @bpointles2!

ibpointless2 · « **Reply #194 on:** December 17, 2010, 02:14:31 AM »

I also like to say that I did the same capacitor experiment again but instead of a 9 volt battery i used a capacitor. One big capacitor and one little one. the big and little capacitor were left sitting over night to get a official standing voltage.

the big capacitor had .874 volts and the little one had .168 volts. When i connected them up positive to positive and negative to negative the voltage on both went to .846. Now for the crazy part, the voltage after 12 hours is now .902 volts. Thats .902 in both the big and little capacitor.

Where did that extra voltage come from?

I'll post a youtube video of it soon.

News:

User Menu

Author Topic: Captret - Capacitor and Electret (Read 322645 times)

Groundloop

Re: Captret - Capacitor and Electret

tak22

Re: Captret - Capacitor and Electret

Groundloop

Re: Captret - Capacitor and Electret

SchubertReijiMaigo

Re: Captret - Capacitor and Electret

ibpointless2

Re: Captret - Capacitor and Electret

nievesoliveras

Re: Captret - Capacitor and Electret

ibpointless2

Re: Captret - Capacitor and Electret

nievesoliveras

Re: Captret - Capacitor and Electret

ibpointless2

Re: Captret - Capacitor and Electret

nievesoliveras

Re: Captret - Capacitor and Electret

Groundloop

Re: Captret - Capacitor and Electret

nievesoliveras

Re: Captret - Capacitor and Electret

ibpointless2

Re: Captret - Capacitor and Electret

nievesoliveras

Re: Captret - Capacitor and Electret

ibpointless2

Re: Captret - Capacitor and Electret