Author Topic: The Master Of Magnetics "Steven Mark" (Read 1242961 times)

Mannix · « **Reply #2190 on:** November 23, 2006, 02:58:03 AM »

Give it away?
and how would you do that?

Perhaps allowing an understanding of the devices would be the first step.

There are some who just want free power and do not want to understand its operation.
Those people should just be silent and watch. Its free to watch as well !They have nothing to offer the process even if they dont believe it.

In the meantime expressing your frustrations will never increase the likley hood of more information..the opposite is the case. Especially when the inventor is really tired of reading "wanna gimmeee" type stuff.

I am pretty sure that there wont be a "home made torriodal particle accelerator"

I will not respond to anything like this again Im tired of it too.

Keep well , we have a lot to learn don't... you.... think?

dean_mcgowan · « **Reply #2191 on:** November 23, 2006, 03:01:39 AM »

Thanks DM .. but I can fall on my own sword if need be on this one.

The only thing I feel guilty about is that I may be offending some of the great minds who are here contributing to the real challenge of understanding this technology, which by the way I have no doubt is workable.

I wouldnt be still here otherwise.

And before I get accused of being some MIB detractor/distractionist/deciever/... yada yada ..

Get a grip.. read all my posts .. (they are still here .. and unmodified) ...

Therapy .. well .. don't go throwing good money after bad i say ...

allcanadian · « **Reply #2192 on:** November 23, 2006, 03:04:19 AM »

Hey Mannix
If you have the answers why wouldn't you share them? I don't get this-If your so smart you must know all credible scientific data say's global warming will screw us within 10 years-the point of no return. Mass extinctions, rising ph levels, fish stocks collapsing, rampant cancer rates biblical shit happening in our lifetime. And you say or imply you have answers but do nothing! Some gag clause I heard mentioned-will you let thousands of people die next year because this technology isn't here, but supposedly you are a scientific person and your logic say's you can't save everyone, so you do nothing. Your delusion is far more corrupt than DingusMungus at least given the means Dingus might act,you do nothing. Here is your delusion on a silver platter-go to a psychiatrist and tell them you have free energy, show them you are right-now tell them you will do nothing for ten years, when it may be too late, does this sound sane, rational or logical. If you have the answers your logic is flawed and you are delusional in the eyes of everyone here and probably the world, we have no respect in any way for persons who could do such a thing.
So why are you here?

Dingus Mungus · « **Reply #2193 on:** November 23, 2006, 03:12:23 AM »

Quote from: Mannix on November 23, 2006, 02:58:03 AM

Give it away?
and how would you do that?

Schematic maybe? drawings? component list... I got more suggestions if needed...

Quote from: Mannix on November 23, 2006, 02:58:03 AM

Perhaps allowing an understanding of the devices would be the first step.

8 months not sufficient... maybe its the teacher...

Quote from: Mannix on November 23, 2006, 02:58:03 AM

There are some who just want free power and do not want to understand its operation.
Those people should just be silent and watch. Its free to watch as well !They have nothing to offer the process even if they dont believe it.

Sure! Let me run out and drop cash on several spools of wire... should it be: iron, copper, insulated, multistranded?
Let the builders know what they're building and I'm sure more people will quit bitching and start working.

Quote from: Mannix on November 23, 2006, 02:58:03 AM

In the meantime expressing your frustrations will never increase the likley hood of more information..the opposite is the case. Especially when the inventor is really tired of reading "wanna gimmeee" type stuff.

WE HAVEN'T GOT ANY INFORMATION YET!

Quote from: Mannix on November 23, 2006, 02:58:03 AM

I am pretty sure that there wont be a "home made torriodal particle accelerator"

I'll have to find the url later.... My friend in MN is actually building one.

Quote from: Mannix on November 23, 2006, 02:58:03 AM

I will not respond to anything like this again Im tired of it too.

What responce? You didn't answer or even retort... Your "responce" was nothing more then another verbal carrot on a stick. Example: "Keep talking like that and we wont share anymore information..."

Quote from: Mannix on November 23, 2006, 02:58:03 AM

Keep well , we have a lot to learn don't... you.... think?

Yes... Yes we do. I can't wait for it to actually begin.

Ok I'm going to disappear now. I'm sorry to those who are angered by my reply.

allcanadian · « **Reply #2194 on:** November 23, 2006, 03:30:26 AM »

"There are some who just want free power and do not want to understand its operation.
Those people should just be silent and watch. Its free to watch as well !They have nothing to offer the process even if they dont believe it."

Oh my god mannix is YODA- Question me not earthling
Dingus we must offer the almighty process an offering,a young virgin maybe, HAIL the process HAIL the process

What kind of BS is that, that's rediculous- Do you think some starving mother and dying kids in africa gives a shit about your "process". What part of people dying all over the freaking planet for power do you not understand? Power means clean water, lights to read by-education),sanitation and jobs and you would deny them all of this because they don't understand the process? Dude you need help your all screwed up-too much time in the lab with your head in the proton accelerator.

MrMag · « **Reply #2195 on:** November 23, 2006, 04:12:27 AM »

Dingus/AllCanuck,

I agree with a lot of your comments, well, maybe not AllCanucks last one. There is a lot of beating around the bush going on. No solid information has ever been given, just little cryptic clues and a lot of reading between the lines. I was a little surprised at the comment that SM did not want to give out any information or the company will cut off his pension. I think the millions of lives this device could save would be worth more than any pension could be. But, we are not in his shoes so we shouldn't judge him so badly.

A lot of these frustrations are from months of waiting for solid information without any reply. Only more kinda clues. I don't like him implying that we are not smart enough to figure it out. With the clues he gives, it is pretty hard to put it all together. But I do think some people are getting close. What I am scared of is that if this pissing match continues, we may not get anymore clues at all. Maybe the next clue will be the one in which we say " yeah, now I see".

Hey Grumpy, The good old days of vacuum tubes. I have been repairing old (real old) radios since the late 60's. I've worked on TV's also but didn't like it, they take up a lot of room which I didn't have. I still have a couple of tube testers. One is out of a department store. I'm sure you know the kind I'm talking about. You could bring in your tubes and test them yourself. The one I have is full of tube. There is probably close to 300 of them.
Sorry for being off topic on this one.

Tim

allcanadian · « **Reply #2196 on:** November 23, 2006, 04:53:19 AM »

I know Im off topic and probably out of line with my comments but I think this is a fundamental question someone should answer. How could you knowingly let possibly millions of people die by not disclosing information? for a pension? Do these people watch television and see what is happening in Darfur? What kind of mentality is involved to do nothing? To watch Rome burn while you soak your feet in a bucket of water. I don't get this in any way, there is no circumstance which could justify this, I guess we are raised with different values.

dean_mcgowan · « **Reply #2197 on:** November 23, 2006, 05:33:37 AM »

on the news here last night in melbourne australia ..

huge pile of mulch has the potential to burst into flames .. the funny thing is that putting water on it will just make it hotter as it will create more fuel ..

? huh

.. stick some bloody thermal conversion rods in this baby and lets start powereing up on all this free energy ...

aint it funny how some people see a probelm and others an opportunity

hartiberlin · « **Reply #2198 on:** November 23, 2006, 04:34:55 PM »

If SM would be smart,
he would join the forum himself as an anonymous user
and would post some hints from his "replication" effort,
so Paul Stemm and the other owner would not know it is him....

So he could do it anonymously from an Internet caffee
so not to be chaseable...

What is SM afraid of ?

He would not have to give away the exact setup,
but at least show a basic experiment ,
so one can see the real kicks and so one could
see, that more power is generated somehow via the
"kicks" than was applied to generate these "kicks".

Maybe he could just name himself as a friend of SM,
who happened to work with him or something simular...

I guess, if he was so smart to invent the TPU, he
also could be as SMART to post infos anonymously
and not just via Mannix...
do you all agree ?

motofox · « **Reply #2199 on:** November 24, 2006, 12:04:44 AM »

Manix and sm's whole point is that they want us to understand the technology, and i say that it would be a lot easier to understand with a basic working model to learn from, which is proving very difficult to acheive at present. Lifes to short for this crap, i guess this sm guy will just be another stanley meyers and fade away without changing the world forever. Unlike sm, stanley meyers had every intention of doing great things with his technology.
What happened to the guy that acheived Q . has there been anymore info on this? . Also i noticed that the last letter from sm is dramaticly differnt from all previous letters, the way its worded.

hartiberlin · « **Reply #2200 on:** November 24, 2006, 12:34:45 AM »

The problem we face is,
that all the 3 or 4 TPUs shown in the videos
are totally different setups each and everybody is
concentrating on another one, so it is getting mixed up
all the time...

So if SM could at least point us anonymously into the right
direction how to generate these kicks in an overunity mode,
so that the kick output energy is higher than to generate them,
then we could work from thereone on our own and scale
the effect up...

But the first thing would be to generate the kicks in an overunity
mode so to speak.

Maybe the shockwave thread is a good thing to start ?

turbo · « **Reply #2201 on:** November 24, 2006, 01:21:03 AM »

Potential eddies are capable of a structure formation, and they spread due to their particle character as longitudinal shock wave in the area.

hartiberlin · « **Reply #2202 on:** November 24, 2006, 01:29:02 AM »

Quote from: turbo on November 24, 2006, 01:21:03 AM

Potential eddies are capable of a structure formation, and they spread due to their particle character as longitudinal shock wave in the area.

Can you please provide more info on this ?
Do you have a few links to this information and how it can be applied over here ?
Thanks !

turbo · « **Reply #2203 on:** November 24, 2006, 02:35:48 AM »

RE shock waves actually auto-intensify when encountering segmented objects.
The segmentation is the key to releasing the action.
This shock wave does not pass throug the windings of the coil but treats the surface of the coil as a transmission path.
The RE wave is quite diffrent from the electromagnetic field generated around a wire.
Some coils wil be better if they are wound as *-filar serially-connected coils, which just means that the wire used to wind them is multiplied over from certain point(s) before the coil is wound.
The reason for this arrangement is that the magnetic field component of the coils is (nearly) zero as the current flowing across the wire is flowing in opposite directions in alternate turns, and so the magnetic field produced should cancel out.
High voltage high frequency alternating current between two metal objects create a solid state "space" exhibiting the attributes of mass, inertia and momentum.
etc. etc.

Grumpy · « **Reply #2204 on:** November 24, 2006, 05:34:14 AM »

What do you mean by "RE shock wave"?

Is this the same as recompression?

News:

User Menu

Author Topic: The Master Of Magnetics "Steven Mark" (Read 1242961 times)

Mannix

Re: The Master Of Magnetics "Steven Mark"

dean_mcgowan

Re: The Master Of Magnetics "Steven Mark"

allcanadian

Re: The Master Of Magnetics "Steven Mark"

Dingus Mungus

Re: The Master Of Magnetics "Steven Mark"

allcanadian

Re: The Master Of Magnetics "Steven Mark"

MrMag

Re: The Master Of Magnetics "Steven Mark"

allcanadian

Re: The Master Of Magnetics "Steven Mark"

dean_mcgowan

Re: The Master Of Magnetics "Steven Mark"

hartiberlin

Re: The Master Of Magnetics "Steven Mark"

motofox

Re: The Master Of Magnetics "Steven Mark"

hartiberlin

Re: The Master Of Magnetics "Steven Mark"

turbo

Re: The Master Of Magnetics "Steven Mark"

hartiberlin

Re: The Master Of Magnetics "Steven Mark"

turbo

Re: The Master Of Magnetics "Steven Mark"

Grumpy

Re: The Master Of Magnetics "Steven Mark"