Author Topic: The Master Of Magnetics "Steven Mark" (Read 1239272 times)

hartiberlin · « **Reply #2205 on:** November 24, 2006, 08:21:25 AM »

Quote from: turbo on November 24, 2006, 02:35:48 AM

RE shock waves actually auto-intensify when encountering segmented objects.
The segmentation is the key to releasing the action.
This shock wave does not pass throug the windings of the coil but treats the surface of the coil as a transmission path.
The RE wave is quite diffrent from the electromagnetic field generated around a wire.
Some coils wil be better if they are wound as *-filar serially-connected coils, which just means that the wire used to wind them is multiplied over from certain point(s) before the coil is wound.
The reason for this arrangement is that the magnetic field component of the coils is (nearly) zero as the current flowing across the wire is flowing in opposite directions in alternate turns, and so the magnetic field produced should cancel out.
High voltage high frequency alternating current between two metal objects create a solid state "space" exhibiting the attributes of mass, inertia and momentum.
etc. etc.

Please tell us more, sounds very interesting.
What are RE shockwaves ?

dean_mcgowan · « **Reply #2206 on:** November 24, 2006, 09:06:34 AM »

http://flux.aps.org/meetings/YR99/CENT99/abs/S5987.html

our poster is coming out of this zone and i am guessing relaxation effect shockwaves ...

dean_mcgowan · « **Reply #2207 on:** November 24, 2006, 09:15:12 AM »

The magnetization in such FM domains has a component which is opposite to the external field direction

dean_mcgowan · « **Reply #2208 on:** November 24, 2006, 09:17:17 AM »

do i get an elephant stamp or a gold star for this one Steve ...

dean_mcgowan · « **Reply #2209 on:** November 24, 2006, 09:20:20 AM »

this has not been about money its about not wanting to be the next Fleischmann and Pons ...

dean_mcgowan · « **Reply #2210 on:** November 24, 2006, 09:25:55 AM »

intellectual exile would be far worse than any death imaginable ...

dean_mcgowan · « **Reply #2211 on:** November 24, 2006, 09:48:17 AM »

google -> Nix magnetic resonance

uncanny how many nix's are involved in this field .. hmmm

ok .. now i am really stretching the lateral thinking here .. even i can recognise that ....

back in yor box deano ..

FreeEnergy · « **Reply #2212 on:** November 24, 2006, 10:02:03 AM »

http://www.altenergy-pro.com/index.htm

raburgeson · « **Reply #2213 on:** November 25, 2006, 02:31:27 AM »

You guys are harsh the last couple of days. Steven can't tell us more. But I want you to remember this was in developement 30 years and we got 10 of that so we all new this wouldn't be simple and quick. Control questions are dangerous to Steven. Theory of magnetism and general electrical formulas and things of that nature should be safe.
Steven posts here that means he is part of our family. We'll not want him hurt or sued out of existence. This is a long haul experiment on a circuit that is a bit foreign to what any of us are used to working on. I have been relaxed at the work bench doing, I promise not to get excited or upset. Probably Steven's best bet is to go join a unrelated post here and enjoy being part of our community. I'm going to take a break from the bench and read up on scorched circuits, got a friend, and a post by grumpy elsewere's here makes me pause what I'm fighting with for the moment. There might be many ways to skin this cat. "Several signals can travel in a single wire independently." Our solution when we and if we get one could be completely alien to the patented controls owned by the company. Things are turning a little obsessive with me and this TPU anyway, almost took it with me the other day while walking the dog. I haven't had any type of intuition on this circuit yet and was thinking maybe if I just look at it a while the answer might just jump out and call me stupid. You can also rotate a field with sinewaves.

Grumpy · « **Reply #2214 on:** November 25, 2006, 05:34:40 AM »

can also reflect back on itself

more than one way to achieve the shock wave but must have very sudden change in field - by whatever means - over and over - field must never be allowed to relax and dissipate completely - nor must it be allowed to become the monster.

Thaelin · « **Reply #2215 on:** November 25, 2006, 04:07:54 PM »

Well, getting some through put from the coils. Charged up a 20000uf 50v cap and when I turned on the light, pow went the filament. So at least I am drawing "some" useable power from it. Takes a while for it to happen but on the way there.

Still trying to fathom out how to make this thing self generate yet tho. Still chaseing it.

sugra

ronotte · « **Reply #2216 on:** November 25, 2006, 05:11:43 PM »

Hello to all,
I'm a newbie, just one of those that you say are following but not sharing anything with the few guys which are actually experimenting. Well I'm now so concerned with TPU that I find myself thinking about it also when it is supposed to do other things! So I've reached the following conclusion that I like to share. May I ask your opinion/help about this, just before starting to assemble my project?

Geometry:
Let me assume that this TPU is structured on 2 rings, one over the other, with a between distance of let us say 2 Inch. The rings are just house garden hoses. The ring diameter is 10 Inch.

Purposes:
The under ring is the continuous power generator, the upper ring is for generating auto start voltage surge for the initial powering of the under ring (actually it is my opinion that this ring could be better positioned just around the under ring itself).

Under Ring architecture:
The under ring is composed of 4 air coils at 90? plus 1 collector coil wrapped over the others and wound in bifilar way. Each of the 4 coils is simple straight windings, may be each one up to 3 segments that may be put in series or parallel...

Upper ring architecture:
The upper ring is composed by a magnetic loop Antenna tuned to .....5,0 KHz?. The antenna output is rectified with a germanium diode and properly fed back to the lower ring in series (protection circuits must be provided).

Operating considerations:
1.The TPU must have a kick generator for the auto start. This kick could be supplied by the sudden insertion of a magnet near the upper ring itself (The Antenna) . First of all I've to verify/optimize the rectified output coming from the HI Q tuned circuit. This output must not be levelled, as the voltage is transient e.g. is rich of harmonics that are what we are looking for. The voltage spikes so obtained are fed to the generator collector ring (one of the bifilar winding), may be I've to exchange polarities.
2.The generator ring has: 4 windings connected a-la-Tesla in order to obtain, when properly driven, a rotating field; a collector coil bifilar winded with purpose to obtain: a tuned circuit (5.01 KHz?) that excited with the spike pulses rich of harmonics but with a base frequency 5,0 KHz resonates and coupled to upper ring enhances the spikes there produced so increasing number and amplitude of the spikes themselves. The little frequency difference does produce, as the signal combines (+and -) in the upper loop, double size spikes so increasing in an exponential way the voltage.
Note: may be that the correct resonance frequency (of the antenna)is just provided by the presence of the starting magnet.
3.As the voltage reaches a good level (few Volts?) a passive circuit drives in quadrature the collector coil.
4.We should have now a sustained horizontal rotating field.
5.I forgot to say that I've put in the toroid centre a vertical strong Magnet.
6.As the horizontal field rotates it cuts the vertical magnet vertical field of the central magnet. This cutting is done at 5KHz and does produce a very strong auto-induction on the collector winding so should be possible to extract power from the free collector bifilar winding a-la-Marinov with all the sides effect about local ionization, gyro, plasma,?.

I intend to start building the magnetic antenna and see what kind of output I'm to find for the 5KHz resonance. Perhaps, considering the oscillator approach that I intend to use with the lower ring would be necessary fractions of Volt.
Sound interesting or I've to forget all?

IdentFlyObj · « **Reply #2217 on:** November 25, 2006, 07:54:42 PM »

Hi,Ronotte.Germanium diode has got a maximum forward voltage drop of 0.3 Volt.
You can excite the upper antenna using a magnet,but there will be only a few milliVolts.....and harmonics will be a few microVolts.

fcpeace17 · « **Reply #2218 on:** November 26, 2006, 12:29:42 AM »

Quote from: Dingus Mungus on November 23, 2006, 03:12:23 AM

Quote from: Mannix on November 23, 2006, 02:58:03 AM
Give it away?
and how would you do that?

Schematic maybe? drawings? component list... I got more suggestions if needed...

Quote from: Mannix on November 23, 2006, 02:58:03 AM
Perhaps allowing an understanding of the devices would be the first step.

8 months not sufficient... maybe its the teacher...

Quote from: Mannix on November 23, 2006, 02:58:03 AM
There are some who just want free power and do not want to understand its operation.
Those people should just be silent and watch. Its free to watch as well !They have nothing to offer the process even if they dont believe it.

Sure! Let me run out and drop cash on several spools of wire... should it be: iron, copper, insulated, multistranded?
Let the builders know what they're building and I'm sure more people will quit bitching and start working.

Quote from: Mannix on November 23, 2006, 02:58:03 AM
In the meantime expressing your frustrations will never increase the likley hood of more information..the opposite is the case. Especially when the inventor is really tired of reading "wanna gimmeee" type stuff.

WE HAVEN'T GOT ANY INFORMATION YET!

Quote from: Mannix on November 23, 2006, 02:58:03 AM
I am pretty sure that there wont be a "home made torriodal particle accelerator"

I'll have to find the url later.... My friend in MN is actually building one.

Quote from: Mannix on November 23, 2006, 02:58:03 AM
I will not respond to anything like this again Im tired of it too.

What responce? You didn't answer or even retort... Your "responce" was nothing more then another verbal carrot on a stick. Example: "Keep talking like that and we wont share anymore information..."

Quote from: Mannix on November 23, 2006, 02:58:03 AM
Keep well , we have a lot to learn don't... you.... think?

Yes... Yes we do. I can't wait for it to actually begin.

Ok I'm going to disappear now. I'm sorry to those who are angered by my reply.

Steve Marks did not need anyone feeding him how to build this TPU so technically neither do you! What Mannix and Steve have provided; many lengthy videos, cutting open of the TPU, personal discussions and conversations, risking their pensions to help humanity.... they have done more than enough, now it is our turn. Evan

Dingus Mungus · « **Reply #2219 on:** November 26, 2006, 02:54:00 AM »

@ fcpeace
Please check debate thread for response and or continued discusion.

News:

User Menu

Author Topic: The Master Of Magnetics "Steven Mark" (Read 1239272 times)

hartiberlin

Re: The Master Of Magnetics "Steven Mark"

dean_mcgowan

Re: The Master Of Magnetics "Steven Mark"

dean_mcgowan

Re: The Master Of Magnetics "Steven Mark"

dean_mcgowan

Re: The Master Of Magnetics "Steven Mark"

dean_mcgowan

Re: The Master Of Magnetics "Steven Mark"

dean_mcgowan

Re: The Master Of Magnetics "Steven Mark"

dean_mcgowan

Re: The Master Of Magnetics "Steven Mark"

FreeEnergy

Re: The Master Of Magnetics "Steven Mark"

raburgeson

Re: The Master Of Magnetics "Steven Mark"

Grumpy

Re: The Master Of Magnetics "Steven Mark"

Thaelin

Re: The Master Of Magnetics "Steven Mark"

ronotte

Re: The Master Of Magnetics "Steven Mark"

IdentFlyObj

Re: The Master Of Magnetics "Steven Mark"

fcpeace17

Re: The Master Of Magnetics "Steven Mark"

Dingus Mungus

Re: The Master Of Magnetics "Steven Mark"