Author Topic: New invention of motion less generation of electric power (Read 350950 times)

winsonali · « **Reply #120 on:** September 08, 2009, 01:32:23 PM »

i am also not sure what to do
how to proceed many people asking me many things
what ever i posted on you tube was very much uncut and original video
lately what friends working with me are asking a DC unit
so i am completing this, although i am a bit confused how to take it further too many things at the same time too many questions
lets give me some brief time to overcome this
its not basically funding , its not family care , its not getting some thing in your hand
its all about life
Ali

robbie47 · « **Reply #121 on:** September 08, 2009, 02:07:32 PM »

Quote from: winsonali on September 08, 2009, 01:32:23 PM

its not basically funding , its not family care , its not getting some thing in your hand
its all about life

Thanks Ali, that is somewhat of a relieve to us.
I can imagine you are under a lot of pressure.
So, we need to respect that and allow you to work on your DC version first before anticipating on next steps.

minde4000 · « **Reply #122 on:** September 08, 2009, 05:03:42 PM »

If he will be offered money he also might be asked not to share this to the public. I am yet to see a single inventor who refused money and helped the world. Based on the evidence - caution is inevidable.

I hope I really do this time it will not be the case.

Great work Ali

Regards Minde

winsonali · « **Reply #123 on:** September 09, 2009, 12:18:35 AM »

i have just posted my video after some skeptics ask few basic question to be cleared and this time the device is examined by CEO of k-9 electronics Glen Darrien in working
the details of the video are as under

this video is in continuation of my previous video of world's first operating motionless electric generator,
in response to my last video i have several question i have answered those questions as well as shown amperes, In this video the voltage coming from grid are 250 so when we get the dimmer to the lowest level the output was 49 volts so out put from the electro gen become 338 volts my device needs only 30 volts to reach to 220 volts each 1 volt increase means 10 volts in out put
at the input this time we have placed a 60 watt bulb which is representing the input power when the dimmer is low its out put is very dim and when we feed this low power to genie the output from genie become very high but this bulb remains very low showing a low input and high output
regarding calculation although is not as simple as that but its good for approximation
input to genie is 2.7 amps at 49.8 volts so its 49.8 * 2.7 = 134.46 watts
output from genie 1.33 amps at 338 volts so its 338 * 1.33 = 449.54
please see the video in the last video the third wire i have shown clearly
the new bulb added at input was required by one of the examiners of the product and this shows the input remain low when genie makes high output

minde4000 · « **Reply #124 on:** September 09, 2009, 01:46:07 AM »

Its been a while since Ali posted his new video announcment but I cannot find it anywhere. @Youtube under winsonali user only same single old video. Is this some youtube issue or it was posted elsewhere?

Minde

winsonali · « **Reply #125 on:** September 09, 2009, 01:48:39 AM »

its uploading as soon as its finished i will post the link here may be 1 hour more

minde4000 · « **Reply #126 on:** September 09, 2009, 02:01:30 AM »

I am sorry sir. I have had there issues before I tought that was the case. Didnt mean to rush or anything.

EMdevices · « **Reply #127 on:** September 09, 2009, 02:48:29 AM »

Ali,

I see only one video under your name at www.you-tube.com, where did you post the second one? (P.S. ok I just read the above comments, I'll wait)

I watched your first video again, and listened to what you say and also what you just wrote, and I have a few more comments:

1) Your input stage to your device seems to be a VOLTAGE MULTIPLIER using only capacitors and diodes, it uses 3 capacitors (seen in the video) to increase the voltage by a factor of 8=2 x 2 x 2 This is the ideal multiplication factor when no current flows, but if current flows due to a load, the multipliers have a % regulation factor, and the output voltage drops somewhat from this maximum voltage. These voltage multipliers don't need inductors, like you claim in the video. Here's a link for the interested folks: http://en.wikipedia.org/wiki/Voltage_multiplier

2) From you performance ratings (30 V input to 220 V output, and 49 V input to 338 V output) I see you have failed to provide voltage regulation, like your friend asked you too. Voltage regulation means you maintain the output voltage at the desired level despite fluctuations in input voltage or load.

3) Good look with your DC input design. This should be easier to prove if its free energy or not.

EM

winsonali · « **Reply #128 on:** September 09, 2009, 03:29:22 AM »

this is the link of my new video
http://www.youtube.com/watch?v=LoAmtkHkDzI

minde4000 · « **Reply #129 on:** September 09, 2009, 03:34:18 AM »

It says video has been removed because it was too long

Minde

winsonali · « **Reply #130 on:** September 09, 2009, 03:49:36 AM »

reply to em device:

thank you for encouragement yes i also think DC input will clearly explain the behavior

winsonali · « **Reply #131 on:** September 09, 2009, 05:20:48 AM »

this is the new link on you tube

http://www.youtube.com/watch?v=LoAmtkHkDzI

gotoluc · « **Reply #132 on:** September 09, 2009, 06:37:43 AM »

Hello Ali,

thank you for taking the time to make this new video. Great work my friend

I'm really looking forward to your DC version. I would like to help you. I don't know if you need any suggestions for a circuit that changes DC to true AC but the circuit I attached was designed by user name Groundloop to use components I had on hand (4013 and IRF640) and has worked very well for my tests. You can use other MOSFET's then the 640 if you wish and the 4013 is a flip flop. I'm not sure how much current this circuit can take but that may depend on the FET's. The IR2103 you can get on ebay and other model of IR21 series also work.

If you need more details please don't hesitate to ask.

Luc

EMdevices · « **Reply #133 on:** September 09, 2009, 06:40:16 AM »

Ali,

thanks for the new video. Here's my comments:

You do not have a pure sine wave going out of the dimmer into your device. Your instruments will not be accurate. You really need to look at the waveform with an oscilloscope.

Is your output a pure sine wave?

EM

robbie47 · « **Reply #134 on:** September 09, 2009, 09:42:19 AM »

Quote from: EMdevices on September 09, 2009, 02:48:29 AM

1) Your input stage to your device seems to be a VOLTAGE MULTIPLIER using only capacitors and diodes, it uses 3 capacitors (seen in the video) to increase the voltage by a factor of 8=2 x 2 x 2 This is the ideal multiplication factor when no current flows, but if current flows due to a load, the multipliers have a % regulation factor, and the output voltage drops somewhat from this maximum voltage. These voltage multipliers don't need inductors, like you claim in the video.

EM,
I found exactly the same as you stated.
Since Ali mentioned he has a feedback in his circuit, the maximum factor 8 is not relevant anymore.
In my suggested circuit (Reply #108) you see that feedback. I replace the diodes by switches so there can be some form of output control. The very big question is of course how such circuit can become in a state where amplification of both current and voltages occur. I guess we need to go back to Tesla's findings unless Ali would have a more practical hint

News:

User Menu

Author Topic: New invention of motion less generation of electric power (Read 350950 times)

winsonali

Re: New invention of motion less generation of electric power

robbie47

Re: New invention of motion less generation of electric power

minde4000

Re: New invention of motion less generation of electric power

winsonali

Re: New invention of motion less generation of electric power

minde4000

Re: New invention of motion less generation of electric power

winsonali

Re: New invention of motion less generation of electric power

minde4000

Re: New invention of motion less generation of electric power

EMdevices

Re: New invention of motion less generation of electric power

winsonali

Re: New invention of motion less generation of electric power

minde4000

Re: New invention of motion less generation of electric power

winsonali

Re: New invention of motion less generation of electric power

winsonali

Re: New invention of motion less generation of electric power

gotoluc

Re: New invention of motion less generation of electric power

EMdevices

Re: New invention of motion less generation of electric power

robbie47

Re: New invention of motion less generation of electric power