Wesley,


 Yesterday I got a warning from my firewall program as I was posting to the forum here. Someone was knocking on my computer door trying to get in. Since I have added a firewall with advanced Hips filtering no one can get in. The address was of chinese origin. I am afraid you are being targeted as well! I would suggest that you install a firewall asap! I use Comodo firewall. It is free and very excellent! Getting the firewall up and running should not be a problem. Once installed, activate the hips protection and it will tell you everything going on in your computer. Yes it adds pop ups that you have to answer allow or disallow. Block everything that comes from outside of your computer. Once this is done you should be A ok. See if this helps you while you are translating the video's.
 We are getting close to the truth and a lot of people do not want this information to get out. Protect yourself before they take you out.

Then you surely can explain why Tesla's »Magnifying Transmitter« is called »Magnifying«.

What exactly does it magnify and how?
One strange thing with three-plate capacitors (we have talked about) is that seemingly a magnifying transmitter (two Tesla coils) comprises also such a three-plate capacitor. What does that mean? If we want to get rid of the transmitter factor but we want to keep the magnification factor then should we keep the three-plate capacitor (and maybe the coils for resonance) but not the distance between them?

Once again just thinking ...

 Try this edit out instead.

I look with interest akula's schematics and coils and stuff, but still cannot understand the basic principle.
Phase locked Tesla coil to biffilar? Run the Tesla coil at biffilar's 1/4 self resonance or 1/2? Resonance in resonance between a shorted biffilar and another biffilar?


Anyone making sense?

http://www.youtube.com/watch?v=NFZX-zUYlmM&feature=em-comment_received&lc=F1lvEWprbWmUZ2_cPBP2bf6O7lh6z2egIWnrl9A4WK8&lch=email
Wesley Translate's Akula#7 SCHEMATIC Free Energy Device


video was redone in terms of voice track




Wesley

But lets address another misconception.


That "Tesla coil" is not a Tesla coil. Oliver Lodge made that coil. The Lodge coil is working on AC and Tesla coils work on Impulse currents.

Does this matter? I can't see a typical Tesla coil on Kapanadze's table anyway.

Anyone making sense?

If we want to tap the Earth's electric field then it makes sense to use an electronic component that can store an electric field. That would be a capacitor. To get a continuous flow of energy we then need a pumping effect. That's why the capacitor should be in resonance with a coil. So the capacitor is like Tesla's under water tank. The electric field (the water) flows in from the environment and is then converted into a magnetic field (by means of the coil), this magnetic field provides the output energy. At the same time the surrounding electric field can replenish the capacitor.

So I think the Kapanadze device is a resonant circuit build with a three-plate capacitor - which should fit secretly in a small metal can. I'm not even sure if the metal can is not part of that capacitor.

Interesting btw: Three Plate Capacitor

Does this matter? I can't see a typical Tesla coil on Kapanadze's table anyway.
If we want to tap the Earth's electric field then it makes sense to use an electronic component that can store an electric field. That would be a capacitor. To get a continuous flow of energy we then need a pumping effect. That's why the capacitor should be in resonance with a coil. So the capacitor is like Tesla's under water tank. The electric field (the water) flows in from the environment and is then converted into a magnetic field (by means of the coil), this magnetic field provides the output energy. At the same time the surrounding electric field can replenish the capacitor.

So I think the Kapanadze device is a resonant circuit build with a three-plate capacitor - which should fit secretly in a small metal can. I'm not even sure if the metal can is not part of that capacitor.

Interesting btw: Three Plate Capacitor

 Yes it matters. It's like comparing DC to AC.


 I wholly agree with your assessment that the 3 plate capacitor is in fact the KEY here. But might I make a change to your capacitor diagram?

 The bottom connection is the ground or virtual ground connector. The c3 plate pair is the normal capacitance and the c1 and c2 parts are where the ground energy can come into the capacitor.


 Might I also quote Tesla from the Colorado notes:

" In order to produce the greatest possible movement of electricity through a region of the earth in accordance with the plan involving use of a single terminal oscillator, as here experimented with, it is desirable to obtain in some way a large capacity on the free terminal. This is connected with difficulty as spheres get to be too large with moderate tensions and when the tensions go into the millions, streamers can not be easily overcome. The streamers involve loss of pressure just as leaks would on a water pipe which is closed at one end. Large capacity is obtainable in a number of ways of which some are:

1) a coil wound for maximum capacity (internal). The turns are so disposed that between the adjacent turns of layers there exists a great difference of potential, as much as the insulation can stand."

 The coil he mentions is the bifilar coil!

 The single terminal oscillator is a grounded Lodge coil with the upper terminal connected to a separate coil to increase the pressure or voltage of the free terminal. This coil can be the bifilar coil from what I am getting.

 "As has been stated on a previous occasion in connection with this subject, to enable a considerable rise of pressure to take place in a circuit, the same must be tolerably free from inductive influences of other circuits. It follows from this that, although with a secondary in loose connection with a primary a very high pressure is obtainable, yet the pressure will never be as high as when an "extra coil" not in inductive connection with the primary is employed to raise the pressure, because the secondary always reacts upon the primary thus dampening the vibration, while the "extra coil" does not react in such a manner, the rise of pressure being simply due to the factor pL/R."

  The single terminal oscillator is shown in the second attached picture below, right hand of the picture.

"On the other hand, why then has Tesla it not named Magnifying Receiver? "



Could it be that he was simply disguising the nature of it...for obvious reasons ?

Regards...

This allowed the transmission of energy through any medium to be loss-less in a sense.

But loss-less is not magnifying. At least in my understanding.

Actually, what happens if there are two (or more) receivers? If the load connected to one receiver consumes all the energy coming from that one transmitter, then what's left for all the other receivers? What if the load on one receiver creates a short circuit? Will it blow the fuse on the transmitter through thin air?

Transmitting energy loss-less through the air is a very strange thing when examined closely.