Hello all,

@Jason,

I wery well know that youre "my guy".
But I have to warn you: when you see the kicks more and more "transforming", converting into sine waves think about that youre tapping into a sea of energy, into infinite energy.
I know, that you know what I mean.

For the others:
Read what Tom Bearden says and think about.

It seems that the people today are not soooo clever as they think. This technology was a looooong  time before discovered. Think what Tesla did, Hendershot, Hubbard, Coler......yes, this really big peoples. And we?

Now we finally have the chance!!!!!

My garage is more and more the garage of science, people are coming to see whats going on.....In this moment I dont want to say who was 1 week with me and who will come but they are well known here. I dont want that you attac them. Attac me.

Maybe some of you guys with the scopes and a profi oscillator want to have a TPU and find finally 30 minutes in your lifes to built it and see what only 3 people in the history saw: the CREATION of energy!!!! This 3 people are: 1. our master, 2. me 3. my guest.

Yes, gentlemen, Im speaking of the process of CREATION!!!!

The process of the CONVERSION in this case is ALSO the process of CREATION!!!!!

Remember, once, our master asked if the people would intelectuale be able to understand and build.

Sorry to say but I see only a few of you are maybe able to understand.

Dont think Im now better than you. No way. Im one of you. Im still a little man from a little country.
But please understand that I want to SHARE with you. Please be open minded. Dont even think about what you learned.

Look at the German topic at my final drawing. Dont ask, just look. Dont surch for a logic.
Google mobius band or strip, google a double mobius. See whats going on in this mobius. Imagine what my mobius is for.
Look at my fast controls.

Fast controls in this sence that my controls are speeding up my tormado or should I call my tornado a vortex???

Look finally at the video of the "big guy" - 15" TPU. You see a "heatsink".
Look at the open TPU - the black rings. What are the black rings for?? To hold the wires??

If I hear this then I will get a heart attac!!! This rings are ALUMINIUM RINGS!!!!
For what?
Think about what happens when you heat up a wire and you measure the voltages.
Think about what happens when you heat the aluminium.

Im speaking about a temperature of over 100?C!!

I exactly know your next question. I DONT WANT TO ANSWER!!!!!!

I want to force you to built it. My God, only a few minutes.

@Kent

we all know there are several patents used to control the TPU. What do you think Im doing?? You cant imagine how difficult it is to control a sea of energy.
At my 1 "success" I burned my scope..... my next scope is arriving. I dont want to burn this second scope too.

@Stefan,

yes, I really need money so I can inwest the money in my work but not the overunity price!!!

As I remember, you are also building coils, experimenting......

It would be muuuuch better if YOU could have a few minutes and do this:

make 1 control coil with the known meters for the primary and secondary.
cut 2 lamp wires at the needed lenghts.
Connect like in my final drawing.
Connect a load of a 60W bulb.
Connect a scope at the bulb
Connect 3 oscillators.
Connect a 12V supply.
Mix the frequencies and ENJOY!!!!!

Complicated??? This is the reason why I think I dont deserve the price.
I have to figure out how to control my reaction. This is soooooo a powerfull device you cant imagine.
Not once I burned my fingers. Yes, s..t happens.

You all saw the arcs of a 15" TPU in the video.
Guys, that arcs had a power of many kilowatts. The 10 bulbs was only used to show the people that power is in this TPU. Just this.
But do you really think a 15" TPU can deliver only 1kW??? I can only say HA;HA!

Just think about to tune the frequency a few Hz nearer to the "success point" - you have a loooooot more energy output.
Then think about to be more crazy and tune just again a few Hertz to the "success point". What happens?
You have again more energy output.
I dont want to continue.
Maybe now you see what present gave us our master.

Please, dont wast your time with discussions, start finally to built.

No emails, please, they will be in the same moment deleted!!!

When you see me logged then you can expect my answer because Im on vaccation 10 days.

Otto

@ Otto,

have a good time. 

Still waiting for mine 

regards,

Awesome video Jason. Can you verify that this is what you are seeing Otto?

Jason, again, very nice video, and very well explained. Should be easy for anyone else to do.

Regards,
Rich

Hi Jason,

good to hear you again. About you simple test It seems to me that you are just extracting the fundamental resonating frequency of your coil....that of course is a sinusoidal wave. Remember that a square wave is always composed by the the sum of all possible harmonics.....or am I wrong?

Anyway hope to hear you on Skype.

Ciao
Roberto

Hello all,

finally. Since yesterday Im trying to post this picture.

You see in this picture on the top are our known kickis. The lower are the almost converted kicks. Yes, not good converted or to say its hard to see that this signals are the almost sinuswaves.
When you reach this point your equipment is in danger. The pumping of the power supply is not big but clearly to see.
Od course, this is a 2 channels picture.

Otto

Hi Jason,

good to hear you again. About you simple test It seems to me that you are just extracting the fundamental resonating frequency of your coil....that of course is a sinusoidal wave. Remember that a square wave is always composed by the the sum of all possible harmonics.....or am I wrong?

Anyway hope to hear you on Skype.

Ciao
Roberto

Hi Roberto,

Going by the book you are 100% right. However, a lot of things depend on from which prospective one looks at it.
For example, when changing duty and frequency the high frequency harmonics amplitude for a given frequency should vary substantially. If what we see in the Jason?s video doesn?t change much the amplitude of that sine wave, the things are somewhat different than just a level of harmonics in the base signal.

Kames.

In this simple test, I took a spool of 14 gauge stranded house wire about 50ft in length, and I attached the positive lead from a function generator on one end, and the scope probe on the other end. Both ground cables were left disconnected from the spool VERY important!!

Next I just set the output of the function generator to the square wave output (50% duty cycle, 0 DC offset), and I gradually swept through the frequency range from about 500 kHz up to 5 MHz. What I saw was simply amazing!! the small square waves I was putting in (20V pk/pk) multiplied up to 160V when I hit the resonant frequency of the coil! AND the output was sinusoidal!

God Bless,
Jason O

Hi Jason,

I'd like to ask you something about this test you've done based on the following statement from SM when he is talking about kicks:

We are just talking about a straight piece of wire, some electrons and a method of measuring what comes out of it.

So my question is, instead of doing your test with a spool of wire, have you tried the same thing on a straight piece of wire. Maybe if you unwind the spool (and lay it aropund the room  )
Because SM speaks about a straight piece of wire, one would expect to see the same thing then. It would proof once and for all if these are the kicks he means. As a side effect you're also proofing it is not the coil itself that is somehow producing the kicks (harmonics or whatever it is).

Looking forward to your reply!

Robert

Hello Everyone,

Thanks for all the great feedback on my post. I will definitely respond to all your comments within a day or so. I have been playing catchup for the last day or so and haven't had the opportunity to sit down and catch up on everything.

God Bless,
Jason O