Author Topic: The Master Of Magnetics "Steven Mark" (Read 1243114 times)

giantkiller · « **Reply #1950 on:** November 03, 2006, 12:01:45 AM »

Thanks,
Here is a brighter one.
Now, I am going task all of you. Look at the way the fields pair up. Think about how those fields are squeezed by repulsion and dismissed by attraction. It is not the way the fields show up, as in this version, but what is the pressure and release signature of the total action. That is what we tune to.
I am working on the avi of this signature next. My thought is that 'If you build it they will come'.

It is not the scan rate on the back of the glass but the knowledge seen on the other side.

--giantkiller. Enjoy. I wait for replies.

rensseak · « **Reply #1951 on:** November 03, 2006, 12:07:50 AM »

Quote from: ctglabs on November 02, 2006, 11:19:59 PM

Norbert, you are right. SM says it winds up! So the frequency has gone too high for us to hear? Or the camera just cannot pick it up from where it is now?

all in all I can hear it only 4 times and it sounds homogen.

Quote

Do you notice he picks up the larger one in the air and a high pitch wine is heard?

at what time do you mean?

Quote

BUT listening to it again with my eyes closed, I think I can still hear it all the way through. But its harder to hear once SM starts talking, thats all. Infact, if you go to the end of that test, after he stops talking and when he turns it upisde down, you can still hear it. I believe it is constant.
Dave.

I think it is because you still want to hear it.

Norbert

EMdevices · « **Reply #1952 on:** November 03, 2006, 12:56:50 AM »

Are you guys hearing things now

mflynn44 · « **Reply #1953 on:** November 03, 2006, 01:42:58 AM »

Quote from: c0mster on November 02, 2006, 09:35:19 PM

Dave

I also notice here when he puts the magnets on it to "start the device" the unit tips from the pressure of him placing on the magnet. I am wondering what the rings are really made from. One would think as he brought the magnet closer, the unit would lift just before the magnet touched. Unless the rings are not magnetic.

C0mster

I read somewhere the rings are plywood, cut out with a jigsaw, and painted black.

c0mster · « **Reply #1954 on:** November 03, 2006, 02:03:12 AM »

@mflynn44

I just finished cutting out the rings with plexiglass. Now I'm trying to figure what the core would be on each coil. That is if those 4 things that look like legs are coils which I suspect are, and if so would the north and south of the core which might be magnets, be on the side of the core not the ends? Just pondering.

C0mster

jacob · « **Reply #1955 on:** November 03, 2006, 03:33:48 AM »

@ giantkiller:

Great video. But I am missing something here? If I remember correctly, in the Tesla patent you are referring to, opposing coils are creating fields oriented in the same rotational direction, right? However, your video shows the opposite, namely opposing coils creating opposing fields. What your video shows is exactly what goes on when the coils are wired liked the toroidal winding schematic I posted weeks ago.

But maybe your analysis of the above patent led you to see something I didn't see? Please comment.

God Bless

Jacob

mflynn44 · « **Reply #1956 on:** November 03, 2006, 04:41:27 AM »

Quote from: c0mster on November 03, 2006, 02:03:12 AM

@mflynn44

I just finished cutting out the rings with plexiglass. Now I'm trying to figure what the core would be on each coil. That is if those 4 things that look like legs are coils which I suspect are, and if so would the north and south of the core which might be magnets, be on the side of the core not the ends? Just pondering.

C0mster

The rings must be made from a material that won't affect the magnetic field. Plexiglass is great. The rings are just the support structure.

giantkiller · « **Reply #1957 on:** November 03, 2006, 04:53:26 AM »

Quote from: EMdevices on November 03, 2006, 12:56:50 AM

Are you guys hearing things now

I hear it too, the device is ramping up I guess

GK, you got the right idea with those pics, nice animation too. I should say the animation shows a different phasing then what I'm doing.

Yes. My controller runs 4 segments now also. But I can re jumper it to accomodate any configuration. My focus is on theTesla 390721 tranformer. Just the transformer. The avi name. It is driven the exact opposite of the SM coils or so we think right now. Tesla said 1.2khz was high freq! His commutators also spark heavily. I see power.
I had posted before the changes I need to make. One is Square wave +-15 ac. The BEMF is so important here. In the avi when the previous coils produces BEMF on its trailing edge, the next coil is either attracting or repulsing. This is where the additive energy comes in. This scheme can use the BEMF to its advantage. But also I need to video the pressure wave of the 8 expanding and retracting field as they warp around the phasing of the coils. There is actually 8 fields here because of the polarity change. I believe the warp is what either rotates or pressures something else.
This is not theory. The fields are shown true to their creation and by the sources we know are true. You guys working on the collector are coming up with great solutions. In fact, so many that now we have a huge bag of tricks to pull from. Like Edison, we will shortly know what works and what doesn't. The way in which the poles change in the video form a helix! And not only the N & S poles but also the edge of the fields themselves. Totally busy. The helical motion crosses the center at all angles. This one is going to be tough to do. The program I use does not do repulsion or collision detection, so I have to reproduce it correctly by art. This is not say it isn't real. I published the pictures for analysis & approval by others. If I am wrong, I look forward to being rejected. I can trust the posters here to do that. We all want to be right and not wrong. This can introduce flaws. And I know I am not the only flawed individual here. So bring it on.

--giantkiller.

c0mster · « **Reply #1958 on:** November 03, 2006, 04:57:01 AM »

Now I have 4 ceramic bars 1" * 1" that are not magnetized and 4 that are. The 4 that are are magnetized, are magnetized with north and south on the sides not the ends. I need to router out the boxes on the ring to allow these bars to go through the plates. Just like the one TPU I posted earlier. Once that is complete I need to ponder how the coils are rapped. It almost looks as if the may be rapped lengthwise as apposed to around like a traditional coil. But I have seen posts here that show a possible solution.
Any ideas?
Till next time...

giantkiller · « **Reply #1959 on:** November 03, 2006, 05:04:12 AM »

Quote from: jacob on November 03, 2006, 03:33:48 AM

@ giantkiller:

Great video. But I am missing something here? If I remember correctly, in the Tesla patent you are referring to, opposing coils are creating fields oriented in the same rotational direction, right? However, your video shows the opposite, namely opposing coils creating opposing fields. What your video shows is exactly what goes on when the coils are wired liked the toroidal winding schematic I posted weeks ago.

But maybe your analysis of the above patent led you to see something I didn't see? Please comment.

God Bless

Jacob

The opposite coils are cross coupled so that the fields are opposite directions but the same direction visually, like away or towards you.
Post me your prior reference. I need to see.

--giantkiller. We blaze!

giantkiller · « **Reply #1960 on:** November 03, 2006, 05:07:27 AM »

Quote from: c0mster on November 03, 2006, 04:57:01 AM

Now I have 4 ceramic bars 1" * 1" that are not magnetized and 4 that are. The 4 that are are magnetized, are magnetized with north and south on the sides not the ends. I need to router out the boxes on the ring to allow these bars to go through the plates. Just like the one TPU I posted earlier. Once that is complete I need to ponder how the coils are rapped. It almost looks as if the may be rapped lengthwise as apposed to around like a traditional coil. But I have seen posts here that show a possible solution.

Till next time...

Dude! You do sweet work!

--giantkiller. Now we blaze magnetically.

c0mster · « **Reply #1961 on:** November 03, 2006, 05:11:19 AM »

Ahh thanks giantkiller

All for science and science for all!

mflynn44 · « **Reply #1962 on:** November 03, 2006, 06:25:11 AM »

I've been doing some experiments with rotating magnetic fields with a feedback arrangment trying to get the "kick" described by SM and Mannix. I've just about come to the conclusion that my approach will never lead to overunity. I now think a rotating field is just incidental to the operation of the TPU or maybe there is no rotating field. Dave tells us "the power has to come from someplace" and, of course, he's right. Maybe it's necessary to think further out of the box. Looking back at some of the patents that morphed into the TPU has given me some new ideas. I wonder why most of the TPU devices are taped around the oval outer coil and painted black? Is it just to hide something? Maybe the tape is an active part of the device. It could be thin copper with adhesive on one side; they sell it in arts and crafts stores. This could act as an antenna feeding the device or a converter changing the output radiant energy into potential, or both depending on the internal structure. When radiant energy is converted into electricity the potential is DC. The input from the antenna comes into an arrangement of three coils which causes phase shifts and then the signals are recombined; this is where the "kick" comes from. The kick appears at random times but you can tune the coils for more or fewer kicks. The kick triggers the release of radiant energy; we're not dealing with electricity at this point. The radiant energy is collected and converted into electrical potential in the converter.

Dave, to answer your question. No, I don't know what radiant energy is. For that matter, I don't know what electricity is; I know what some people think it is. I do know radiant energy exists. What we call electricity is a subset of whatever radiant energy is. Radiant energy can be converted into electron flow (one form of electricity). Not directly, a potential (dipole) is created, the vacuum is ordered, and we can then have a flow of electrons from the vacuum through a load.

Dansway · « **Reply #1963 on:** November 03, 2006, 08:02:52 AM »

I think this might have been talked about before, but there is so much on this thread it is hard to remember everything (no, imposible).

Take from the Keelynet "eScribe" list from 2002:

Hi Folks!

Along the lines of aether/zpe having dual properties such as;

voltage vs current
pressure vs vacuity

and a means of focusing the omnipresent aether/zpe background energy
into 'pressurized' or collimated HIGHER density beams that can be
intercepted to induce current or voltage which can be tapped,
-----------------------
Mike sent in the following excellent possibility;

HI Jerry,

I would like to point out another observation I have made which you may
have
made as well. Have you noticed that the excess energy that comes in is
pretty well always 90 degrees from the flow of the catalytic energy,
i.e.
the arc?

Now, just think, induction is electrically 90 degrees out of phase with
capacitance, i.e. the current in an inductive circuit is 90 degrees out
of
phase with the voltage of a capacitance circuit, or vice versa.

This means, when I visually see it in my mind, that one is off axis to
the other thus it is not within the same time/energy domain flow of the
other. This means that they have nothing in common and cannot affect
each other.
BUT, they can be made to do work and one can lead to the other.

For instance, suppose you wound a coil with a tightly twisted pair of
wires
which were not connected to each other at either end. What you have
just
made is a capacitor.

Now take this capacitor winding and wind it around a magnetic core. Now
take and wind another standard winding around this same core. Now pump
the capacitor winding with an AC source.

The charge and discharge of the capacasitive winding will induce a
"magnetic" field in the core and cause a current to flow in the
secondary winding, BUT the capacative winding will NOT be affected by
the back EMF of the secondary
winding because magnetic energy, as far as I know, does not affect the
electrostatic energy in a capacitor.

Basically you have a one way transformer. There are other technical
problems which have to be worked out and considered but I think you get
the gist of what I'm saying.

The reason one cannot affect the other is because they are 90 degrees
from each other from an energy prospective.

One coming down, and one going forward. One can lead to the other but
not the other way around.

I think these properties are useful and can be exploited. Remember the
Tesla flat wound bifiler coil. Well, it was a high capacitance winding
with inductive properties. One complimented the other.

Thus the coil exhibited very high voltage gain and Tesla claimed one
could start such a system and make it self running because of these
properties.

Mike

Regards,

Dan

otto · « **Reply #1964 on:** November 03, 2006, 09:39:59 AM »

Hello all,

excuse me please for the next words you will reed from me but I cant be quiet.

So far we all have done a great job but we are making a step foreward and two backward or can anybody say he has a working TPU??
We have made thousand of posts, seen thousand of pictures looked at thousands of other sites that are great, but not for us.
How many of us has the equipment for this work and they are posting and wasting our time?
How many of us has made the coils for the TPU??? How many of us know what we are searching for??
We all are guessing. If, if, if...

Now you are asking what the hell..

I have 34 years expirience in electronics and I exactly know what we are searching. Im not a scientist but Im a television repair man from the good old times when we had tubes in TVs and I repaired thousands of them. Now Im in digital electronics for years, 10-12 hours every day.
Im telling you this because Mannix said Im on the right way (a little step).
Today I brought my scanner so I can post images what Im doing.

IM NOT THE BRIGHTEST BRAIN ON THIS FORUM SO PLEASE HELP ME!!!!!!

I dont want to wait 10 years to have a working TPU.
Let us work together!! from the beginning!!!

Please, guys who havent a scope, a square wave generator, and a multimeter be quiet(excuse me again for this).

Because this is a international forum and I see a lot of users are only reading and not posting ( I was one of them because my English is so bad) I think it would be very good for us that our ONLY German speaking friends can also work with us. Im speaking bad English (as you see) and very good German. So my friends feel free to contact me.
NO, NO dont think I want be a leader (chief). Im not a leader at work nor at home (I have a wife). I ONLY WANT A WORKING TPU!!!!

Im not so good in theories because I dont care much of it. Im a guy for practical work.
I will post drawings from the beginning of winding the TPU until we all finish with success.

News:

User Menu

Author Topic: The Master Of Magnetics "Steven Mark" (Read 1243114 times)

giantkiller

Re: The Master Of Magnetics "Steven Mark"

rensseak

Re: The Master Of Magnetics "Steven Mark"

EMdevices

Re: The Master Of Magnetics "Steven Mark"

mflynn44

Re: The Master Of Magnetics "Steven Mark"

c0mster

Re: The Master Of Magnetics "Steven Mark"

jacob

Re: The Master Of Magnetics "Steven Mark"

mflynn44

Re: The Master Of Magnetics "Steven Mark"

giantkiller

Re: The Master Of Magnetics "Steven Mark"

c0mster

Re: The Master Of Magnetics "Steven Mark"

giantkiller

Re: The Master Of Magnetics "Steven Mark"

giantkiller

Re: The Master Of Magnetics "Steven Mark"

c0mster

Re: The Master Of Magnetics "Steven Mark"

mflynn44

Re: The Master Of Magnetics "Steven Mark"

Dansway

Re: The Master Of Magnetics "Steven Mark"

otto

Re: The Master Of Magnetics "Steven Mark"