Author Topic: The Master Of Magnetics "Steven Mark" (Read 1242923 times)

virus · « **Reply #1725 on:** October 29, 2006, 10:33:18 AM »

MRD10

Take the OP connections and connect it too IP1, do the same with bifilar coil 2 or 3, wire a OP2 over them and connect it to IP2, could this then beself sustaining, when magnets are added ? ? ? ? ?

For an out put take one connection of IP1 and IP2,

WILD WILD GUESSS ! ! ! ! !

Virus

virus · « **Reply #1726 on:** October 29, 2006, 10:49:17 AM »

Dave

Thanks I get about half of it, I will read it up even more, thanks.

Even J N Labs says, Ã¢â‚¬Å“Today, I think that the TEP is "a way" to achieve a good Overunity device.Ã¢â‚¬Â

I just wish I had the knowledge you guys have, for me itÃ¢â‚¬â„¢s like the blind leading the blind.

Virus

mrd10 · « **Reply #1727 on:** October 29, 2006, 11:07:27 AM »

Hi Dave,

Your right, I'm just trying to understand now more about bifilar, because really I don't, so sorry about that.

I was just reading this simple experiment:- http://www.tesla-coil-builder.com/bifilar_electromagnet.htm

Of course I'm trying to findout more about this, so even if you drew a pic, It would make it easier to understand what your trying to convey about how SM's second device might be configured.

So bifilar really should be wound like this, as in series:-

mrd10 · « **Reply #1728 on:** October 29, 2006, 11:23:29 AM »

Hi Dave,

I guess its a start, I'm trying to get as much as i can , so i don't go into this blind.

It would make sense for SM to do it this way, I just figured from that experiment that its a very efficient way to produce magnetism.

anyway what time do you knock off, I'll come and we'll go for a couple of drinks and talk about it........LOL

Dom

virus · « **Reply #1729 on:** October 29, 2006, 11:27:39 AM »

Dave

I always had a interest in electronics/electrical but never furthered it as life and the family took up a lot of time. Know looking back, I surely miss a lot.

I will try and keep up with you guyÃ¢â‚¬â„¢s. Have a bit of a brain thing, as soon as I see like table or graphs it sort off just donÃ¢â‚¬â„¢t want to cope, like a 2 minute memory thing, too much input to little draws to file all the info, must be from all the coffee over the years. This after having one of the better ones around, and I donÃ¢â‚¬â„¢t mind saying so, Biggest frustration in my life.

Enough said, if you donÃ¢â‚¬â„¢t mind IÃ¢â‚¬â„¢ll tap yours and the likes on this form, as you said, a vast number years of joint experience on this forum.

Really thanks, (with the famous phrase on over this weekend, Ã¢â‚¬Å“Waiting for OttoÃ¢â‚¬Â )

Virus

mrd10 · « **Reply #1730 on:** October 29, 2006, 11:51:47 AM »

Quote from: virus on October 29, 2006, 10:33:18 AM

MRD10

Take the OP connections and connect it too IP1, do the same with bifilar coil 2 or 3, wire a OP2 over them and connect it to IP2, could this then beself sustaining, when magnets are added ? ? ? ? ?

For an out put take one connection of IP1 and IP2,

WILD WILD GUESSS ! ! ! ! !

Virus

Hi Virus,

The best thing would be to wind some coils and experiment, who really knows.
We are all here trying to figure things out. There's a Guy in this forum, that were anxiously awaiting his results, as he has said he has wired his tPU as per Teslas transformer on patent 390 721, and that he didnt have any input connected to it and the compass he placed in the middle of it was slowly spinning, but he wont post until monday.

What I did was draw the transformer windings out.
My God child came over yesterday, as he comes to visit me from time to time and loves what i do. He is a smart cookie as well, and mentioned to me to look up Tesla's egg on youtube, and i noticed the connections were 4 as per that transformer.

This transformer setup causes a rotational magnetic field, now it's quite possible that SM is tapping into some resonant frequency, like earths magnetic field, and is inducing this into the transformer setup, he mentions small kicks building to larger kicks, so its quite possible that this transformer Toroid configuration causes this effect.

Dave did do an experiment with 3 non-toroidal transformers, where if he inserted 2 exact sinwaves (in exact phase) into 2 of them and fed this to a 3rd transformer, the signal would double, so its quite possible with a toroidal unit something like this would exponentially climb.
SM did say that toroidal is a fascinating configuration, and crazy phenomenon happens.

I've been quite active in this forum, as i think this is one of the best things since sliced bread.

Dom

mrd10 · « **Reply #1731 on:** October 29, 2006, 12:04:50 PM »

Quote from: ctglabs on October 29, 2006, 11:28:35 AM

Dom, are you in London?

Just a quick note, from the video we can now show that we have a thick collector at 90 degrees on the inside. Around this we have an external vertically wound coil which goes right around the entire thing. Then when the tape has been removed at the back, we can see a big empty area inside. So I guess for now this can show that the inner coils are indeed wound in sections around it, not as one hole coil around it like the outer one which we can see its shape in the back tape.

So far this confirms mostly everything we had via Mannix.

Dave.

Hi Dave,

No Im in Australia, its 10 oclock now, night time.
I catch up usually at night on this forum. Yes the larger one don't have much in them, If you look at the good quality mp4 video, on the smaller ones, youll notice to that these are emtpy rings, I could tell, even with the tape on them, freeze on the 6 inch one and youll notice that there is wires wound on the top, but if you look about 10cm down, its a different shade of black, looks like there is nothing there, think of the first two prototypes and then think about winding them with tape.
You wouldn't know really would you.

But luckily i guess those first two don't have much on them, and then when we see the larger one being cut, they look empty as well, so really these devices have to rings.

The second prototype is interesting, because all the windings are on the bottom ring, but i guess by making them smaller then he could do the same on two rings.

Dom

virus · « **Reply #1732 on:** October 29, 2006, 01:08:25 PM »

Guy's

I got all this together, suppose it is not worth starting without a o-scope only have a DMM.

I need to get an o-scope, any suggestions, what must I look for, what must it can do, etc.

Virus

mrd10 · « **Reply #1733 on:** October 29, 2006, 02:13:32 PM »

Sure and I tell em to start a bomb fire.....lol....only kidding, I did wire my mums hot plate today, and was careful by tirning the power off before starting.

Hiya Lindsay, Who are the 3 your referring to? Last night the magnificent 7 were on, but i think they should rename it to the dead 7, since i think they are all dead, I'm hoping we don't all die before we findout....lol

Any comments from SM's? has he or you been corresponding? does he still see what us crazies are doing here?

HIs prob having a laugh and going.....no no no, thats not it......ah bugger em, i'll keep em in suspense......lol

Sincerely,

Dom

Oh one thing that has been bugging me, is how does the magnet work? would it cause oscillation if you just placed it ne
ar a small inductor toroid?

mrd10 · « **Reply #1734 on:** October 29, 2006, 02:32:15 PM »

Ok Lindsay, in saying that, I ve worked with 240, thats here of course in australia.

If we were to have safe gaurds set out before continuing, would that suffice, like a disclaimer

so here it goes.:-

The information provided on this site is believed to be accurate, but is not guaranteed to be free from errors. The information is provided "as is" - use at your own risk.

Several projects involve direct contact with mains electricity. You will be exposed to dangerous voltages, as well as potentially causing damage. Do not attempt these things unless you are aware of the risks.

I can not be held responsible for any consequences or outcomes after visiting this site.

END

Hows that sound

Sincerely

Dom

mrd10 · « **Reply #1735 on:** October 29, 2006, 02:38:55 PM »

If we can post a disclaimer in red on every page saying that the Sm device is potentially dangerous, know that these voltages can kill you, I think that would hammer home to most people here..........common SM, don't let it end this way.

Were your fans.

Sincerely,

Dom

mrd10 · « **Reply #1736 on:** October 29, 2006, 02:55:36 PM »

Ah thats not good for the ones that do get it, we have to strive now to work it out, oh well, thats the way of things.
Sometimes if its too good to be true, it usually is.
In the respect what im saying is that a little help would go along way here.

Oh I think i may have answered my own question before with the first two devices, ive noticed that both are been placed inside the toroid, and i believe this may start up because the toroid is oscillating already. I think Otto said that without any input the compass was rotating slowly, anyway just have to wait for him to post again.

Sincerely,

Dom

Ok everybody get this, SM's device is dangerous, i'll keep saying it......common Steve....we want Steve, we want Steve, we want Steve.....

lol

I have to laugh, sorry Lindsay.

Dom

mrd10 · « **Reply #1737 on:** October 29, 2006, 03:02:24 PM »

hehehehehehe had a good laugh on that one , didn't you Marco.

Anyway time for bed for me, its late, and goto go and pay some bills tomorrow.

Cya all soon

Dom

virus · « **Reply #1738 on:** October 29, 2006, 03:05:36 PM »

Asking me, this technology will then not be safe to be mass produced for marketing. Specially to the financially underprivileged, or third world populous, as was thought of, to benefit, by some members on this form.

Suppose, in Africa for example it is then better for the 10 or 12 year old black guy to keep carrying his Ak47, even though nothing good can come out of it, maybe only a feeling of a little security. No food, no education, no future.

That guys was learned to use that AK47, you think he can not be taught how to build and respect this that can give him, food, education, and a future, life. I suggest you take a hard look at the movie Black Hawk Down.

Which is more dangerous to give a gun or life ?

The saying goes, He how controls food controls people, he how controls energy controls nations. You choose ! Are you siding with those that is the cause of suffering like the warlordÃ¢â‚¬â„¢s, or to uplift.

Hey there is Mexico in USA, the kids selling cocaine (is this less dangerous), Latin American countries, India, and, and, and, and . . . (bet all you see is M O N E Y, donÃ¢â‚¬â„¢t you have enough ?

Take a good and hard look at how much and what you have, compared with ?60% of the people on this planet, etc.

I suggest you rethink what you have written, and judge your own motives.

Virus over and out.

sparkman · « **Reply #1739 on:** October 29, 2006, 03:08:02 PM »

The idea of a bifilar winding is to reduce the "leakage inductance" as far as possible by having the windings occupy as nearly as possible the same physical space. Transformers, especially HiFi output transformers do this with bi-tri- or even quad-filar windings. Small RF transformers use shielded cable for a bi-filar winding as the inner and outer nearly occupy the same space-concentrically. Leakage inductance is the extra inductance that shows up in the transformer when trying to couple power from one winding to the next. It degrades the coupling, radiating the magnetic energy into the space around the transformer.

News:

User Menu

Author Topic: The Master Of Magnetics "Steven Mark" (Read 1242923 times)

virus

Re: The Master Of Magnetics "Steven Mark"

virus

Re: The Master Of Magnetics "Steven Mark"

mrd10

Re: The Master Of Magnetics "Steven Mark"

mrd10

Re: The Master Of Magnetics "Steven Mark"

virus

Re: The Master Of Magnetics "Steven Mark"

mrd10

Re: The Master Of Magnetics "Steven Mark"

mrd10

Re: The Master Of Magnetics "Steven Mark"

virus

Re: The Master Of Magnetics "Steven Mark"

mrd10

Re: The Master Of Magnetics "Steven Mark"

mrd10

Re: The Master Of Magnetics "Steven Mark"

mrd10

Re: The Master Of Magnetics "Steven Mark"

mrd10

Re: The Master Of Magnetics "Steven Mark"

mrd10

Re: The Master Of Magnetics "Steven Mark"

virus

Re: The Master Of Magnetics "Steven Mark"

sparkman

Re: The Master Of Magnetics "Steven Mark"