Here it is dave:-post 458 i think

Yes that is right, by using only one wire from my function generator to the transformer; my understanding is that there is no current flow since there is not a complete circuit. Also my circuit is not grounded to an earth ground anywhere. (Stefan did mention something about capacitive coupling being a posable way current was transferred but I'm not sure of that). I did actually post a circuit diagram and information about the specific transformer I used a while back but it seems that people either missed the post or ignored it. I think that it is significant that I can actually get an appreciable current output with nothing but a fluctuating voltage potential as the input. I also posted some videos of my original experiment where I discovered this effect. Though I was using some diodes in a setup I was testing for something completely different (it was an accident that I even found the effect). Here are the links to my original posts about both my setups:

Post about my diode circuit:
http://www.overunity.com/index.php/topic,712.msg14080.html#msg14080

Demo Videos of the circuit:
http://overunity.com/jason/

Posts about my Transformer circuit
http://www.overunity.com/index.php/topic,712.msg12399.html#msg12399

http://www.overunity.com/index.php/topic,712.msg14087.html#msg14087

Post with the circuit diagram
http://www.overunity.com/index.php/topic,712.msg14101.html#msg14101

I can't seem to find the post where I posted the pictures of the transformer but since the upload folder is still full, e-mail me (Jdo300@sbcglobal.net) and I'll be happy to send you the pictures.

@jacob

Awesome Insights about the inrush current in a wire! This proves my circuit in a sense because if you think about it, the only thing driving the electrons forward in the wire is the potential difference created inside the wire by the EMF (aka voltage potential) produced by the moving magnet. So I can create an EMF in my wire without using a ground and still create radiant energy bursts (via. Longitudinal waves) which are picked up in the secondary of the transformer. As I stated many times in my early posts, the setup I used is very frequency sensitive; and I noticed that the *sweet spot* frequency was determined by the size transformer/coil that I used. The larger transformers worked at a much lower frequency than the smaller transformers! I also developed a simple method to find the sweet spot by looking at the scope screen. When I make my demo video of the transformer, I?ll show how the output waveform changes as the sweet spot frequency is found. It is very obvious because the voltage wave form jumps up at the frequency.

God Bless,
Jason O
[/quote]

what does one use as a white noise generator. I have been studying Edwin Gray's circuit and Tesla's Magnifying Transmitter, this sounds much like those, but without the pulsing. I hate that i have come in on page 500 i wish i could read all that was posted, it would sure help. Evan

Does it look like this by any chance?

Hi,

Did you notice this in daylight, or only in the dark?  Normally for things like that to show up in a one atmosphere pressure a long exposure camera time in darkness is required.  The discharges can only be easily seen when in vacuums or with certain gases inside.  Do you know what it is?




Dave.

Dave

I could see it in the light as well, it was very hard to capture with the camera. The camera only got a part of the true colours. I am at a loss to describe what this is. I think perhaps it is high voltage seeping from the wire covering. All my tests showed that this glow was attracted to magnetic bodies, but worked best with ceramic magnets and ferrite.   

Comster

Dave

I believe the voltage was around 1kv. It is hard to tell when exactly the glow was created but when pulsed slowly it seemed to appear the instance when the spark jumped the gap. It sure would be nice to get access to a high-speed camera.

Comster

Dual coil configuration consisting of a inner coil with an outer coil wrapped around it.  Like a typical toroid.

Apply 50vdc to inner coil and 25kvdc to outer coil.  Modulate (time varying) the field that is set up in the center of device.

This was the first mentioned I've ever heard of that had a coil arrangement like this.

Also resembles Bruce Depalma's model of the universe.  See Attached.

Also, if the coil stops working upside down, but NSEW direction has no effect, then it is not the earth's magnetic field, but gravitational field that is of consequence.  

Puts the whole interia issue in a new perspective...

Purple/blue colored spikes radiated in all directions along the axis of the power lines for just a moment.

i have seen this...
it was a wire on high voltage laying on the ground the whole wire was shining.
but as you grabd it then it was gone but you could not feel anything.

Maybe it's just me, but I don't think I'd grab a wire that was shining like that if I saw it.

Very interesting though.