Hi Marco,

Your a champion, thats it, lets just get on with the experiments, only way were going to findout.
Like a little kid playing in a big play yard, so many things to discover.....it helps to be a kid.

I will try it as well regarding the iron wire, ive tried copper wire before but i dont think i got much from it, will try iron wire instead,

To All the Builders out there , well done and keep up the good work

Ciao,

Dom   

Hi Marco,

What brand of iron wire were you using in the videos? I see that it is green (assuming it's enamled or something). Where did you buy it from? So far, all the iron wire I have is uninsulated.

God Bless,
Jason O

That is just garden wire Jason, It's the stuff you can get at any hardware store in the garden section. It's usually used to wire up baby plants until they are strong enough to support themselves. It's also used to shape bonsai trees etc. The coating is plastic, and serves as insulation, but finding out what the insulation value is will probably be impossible, as it's just there to prevent it from rusting in the elements.

"YES THERE IS A ROTATING FEILD WHICH CAUSES ELECTRONS TO FLOW IN COPER WIRE AND BE USED TO PROVIDE USEFULL WORK FORSE.
SINCERELY,
SM."


Well, while were analyzing the above quote, look at : ""YES THERE IS A ROTATING FEILD WHICH CAUSES ELECTRONS TO FLOW IN COPER WIRE ", what do you think Steven means by that, that the FIELD itself is what causes the electrons to flow in the wire? Or that a rotating field generates energy that is then used to cause a potential difference across said wire, thereby making electrons flow?

Maybe it is time to expand a little bit on this subject. I have already done it briefly, but it seems to have been overlooked. So let's go over this again... This stuff is important

What are the kicks

When an EMF is applied across a circuit, the charged particles (i.e.: electrons) are set in motion in a compounded streptoidal movement. A streptoid is like a spiral. So we first have a main spiral (remember the skin effect). But if you close up on the spiralling "line", you can see that although it may look like a solid line from afar, it is itself a spiral. Then, if you look closer once again at that second spiral, you'll see a third one and so on.

This compounded streptoidal motion causes multiple synchronized rotational magnetic fields to appear within the conductor. The more important the current flow, the more of these rotational magnetic fields are produced because more particles are involved.

Now, as the speed of the particles increases (or decreases if we are interrupting the flow), the rotational frequency of these magnetic fields also increases or decreases. At some point, this rotational frequency becomes resonant with the earth magnetic field and it is at this very moment that, for a split second, energy is transferred from the earth magnetic field to the conductor. This is the kick.

Applying this to the TPU

In the TPU, we are are also creating a rotational magnetic field. The trick is simply to rotate this field at the correct frequency. When this frequency is reached, we have a state of magnetic resonance "within the space of the collector coils". Remember what SM said about the compass when the TPU reaches it's designed optimum state: its needle stops. This is similar to what can be observed when a signal generator is connected to a parallel LC circuit. The current that flows from the generator to the tank virtually stops when the resonant frequency of the circuit is reached. The same is indicated by the compass needle when the rotational magnetic field becomes resonant. And when this condition happens, bingo! You have just created a condition "WHICH CAUSES ELECTRONS TO FLOW IN COPPER WIRE AND BE USED TO PROVIDE USEFULL WORK FORCE". Lots of current!

Regards,

Jacob

Quote from: Jdo300 on October 16, 2006, 06:32:08 AM

Dave, I have also noticed this 4X amplification effect in the little transformer I have been playing around with! When I tuned it to it's 'sweet spot' the 9.2 volt input I had going in turned into about 37 volts coming out! And the amplification was pretty stable at that value! Keep in mind that I was using a 1:1 toroidal transformer in this case which was pulsed with square waves using only one wire!!

God Bless,
Jason O

Jason,

Would you be so kind as to draw what you've done. I like to test that too. What exactly was the input signal (9.2 volts pulsed dc from a signal generator? What frequency?)
Does this mean that you're not drawing any power from the source since you only have one wire connected?

Regards,

Dutchy

Hi Dutchy,

Yes that is right, by using only one wire from my function generator to the transformer; my understanding is that there is no current flow since there is not a complete circuit. Also my circuit is not grounded to an earth ground anywhere. (Stefan did mention something about capacitive coupling being a posable way current was transferred but I'm not sure of that). I did actually post a circuit diagram and information about the specific transformer I used a while back but it seems that people either missed the post or ignored it. I think that it is significant that I can actually get an appreciable current output with nothing but a fluctuating voltage potential as the input. I also posted some videos of my original experiment where I discovered this effect. Though I was using some diodes in a setup I was testing for something completely different (it was an accident that I even found the effect). Here are the links to my original posts about both my setups:

Post about my diode circuit:
http://www.overunity.com/index.php/topic,712.msg14080.html#msg14080

Demo Videos of the circuit:
http://overunity.com/jason/

Posts about my Transformer circuit
http://www.overunity.com/index.php/topic,712.msg12399.html#msg12399

http://www.overunity.com/index.php/topic,712.msg14087.html#msg14087

Post with the circuit diagram
http://www.overunity.com/index.php/topic,712.msg14101.html#msg14101

I can't seem to find the post where I posted the pictures of the transformer but since the upload folder is still full, e-mail me (Jdo300@sbcglobal.net) and I'll be happy to send you the pictures.

@jacob

Awesome Insights about the inrush current in a wire! This proves my circuit in a sense because if you think about it, the only thing driving the electrons forward in the wire is the potential difference created inside the wire by the EMF (aka voltage potential) produced by the moving magnet. So I can create an EMF in my wire without using a ground and still create radiant energy bursts (via. Longitudinal waves) which are picked up in the secondary of the transformer. As I stated many times in my early posts, the setup I used is very frequency sensitive; and I noticed that the *sweet spot* frequency was determined by the size transformer/coil that I used. The larger transformers worked at a much lower frequency than the smaller transformers! I also developed a simple method to find the sweet spot by looking at the scope screen. When I make my demo video of the transformer, I?ll show how the output waveform changes as the sweet spot frequency is found. It is very obvious because the voltage wave form jumps up at the frequency.

God Bless,
Jason O

Tao, I was wondering when you were gonna break out the Rhysmonic Cosmology. I read that stuff a while ago, and then again recently, and even bookmarked it. Then forgot about it, with work, and life and all, go figure..

With RC, a lot of the stuff we've been working on are thrown out. At least, a lot of the WHY is thrown out, and you have to do a logical transform to allow for the gravitometric additition of forces. The wire's capacitance in the TPU would mean a lot more than specific frequency. Not that frequency is unimportant now, it is, just not for the same reasons. Timing is now the main drive behind finding the right frequency.

It also explains perfectly the need for a magnet to start the reaction, why we have dc, with ac "hash", why the device won't work upside down, and how the excess energy enters the system.

But is it complete? Yes, and no. There is no specific reference to a "kick" phenomena that I remember being predicted in RC. However, it can be deduced rather easily, as it would be a simple case of scalars adding when "electrons are first caused to flow in a wire."

The scary thing about RC, is that it is as close to an all encompassing explanation for EVERYONE's over unity results as I've ever seen. From PMMs, to Gravity motors, to Solid state circuits, etc. You can quickly surmise that many people who had alternate theories about what was going on in their experiments, were only partly right. Leedskalnin's sacred geometry is easily seen in the rhysmonic vectors, and planes. Teslas radiant has more going on that he thought it did, Keely's sound related stuff starts to make sense when you do the proper expansion of the logic (sound is a scalar), etc.

pretty cool stuff, I encourage everyone to read Hodowanec's stuff. Also, perform the experiments if you have the ability.



Regards,
Rich

Hello Everyone,

I am running into an annoying hitch while I'm doing some testing. I am trying to make a simple switching circuit to pulse my coils with when I realized that I am having trouble getting my MOSFET to work. I wanted to male sure I could get the switching part alone to work so I connected the Gate of the MOSFET to the positive lead from my function generator (which was set on a 4V square wave 0 to 4+), the Source lead was connected to the + terminal of my DC power supply (Set on 14 volts) and the Drain was connected to the - terminal of the battery along with the ground lead from the function generator. To see if the MOSFET was working right I disconnected the lead going to the negative side of the battery and connected the scope leads across the break to measure any changes in voltage. But for some reason the scope shows that the full 14 volts was there even though my function generator was off (and completely disconnected). When I did turn on the function generator, all it did was make a square wave ripple on the output but it didn't switch the MOSFET on or off at all.... I know it is probably something stupid I am doing here but what am I missing?

God Bless,
Jason O

or like this with a coil