Author Topic: The Master Of Magnetics "Steven Mark" (Read 1242946 times)

supersam · « **Reply #1245 on:** October 13, 2006, 03:25:49 AM »

jason,

think about three collector coils, three toroids in each coil, "three in parallel, 2 in series and 1 in parallel." seems like alot of prime numbers to me. all that add to 5, 6, 8,or nine. make fun if you want.

lol
sam

jacob · « **Reply #1246 on:** October 13, 2006, 04:02:13 AM »

Quote from: -[marco]- on October 13, 2006, 12:12:49 AM

...you all wait untill you see the results of the succer below.
just bougt it like that it wasnt even expensive
didnt even need to coil cause its a 100 meter all in.

Congratulation Marco, you've bought yourself a nice electric fence!

At this point, let me please offer a few thoughts about wire.

First, if we look at Tao's CAD rendering of the coils which, may I reming everyone, has been confirmed as being accurate, we see that it says:

"Control wiring vertically wound in several segments around each of the horizontal collector coils."

And also:

"Other control wires are wound around all of the horizontal collector coils together."

Now, how many segments does it take to make "several segments"? Certainly at least 2. Some may say 3. Personally, I would say 4. In any cases, considering the 3 collector coils and the segments "around all of the horizontal collector coils together", we're talking between 11 and 19 coils minimum. My guess is 20.

O.K., now if we look at the engineer report dated September 29, 1997 (Michael Fennell, Consulting Engineer), it says that the device tested weighted 12 ounces. Think about this: 12 ounces -> 12 coils +, this isn't much weight per coil.

Also, from the pictures that we have seen so far from what I call the Aligned Winding Architecture TPU, and what Dave call the "open" model, and also from the other quote on Tao's drawing that says: "horizontal collector coils of multi strand copper wire", most of the TPU windings seem to be made from multi strand wire.

Therefore, what we have here, it seems to me, is a device made of several relatively short coils of multi-strand wire.

Just a thought!

Regards,

Jacob

kames · « **Reply #1247 on:** October 13, 2006, 04:16:56 AM »

Hi everybody,

It seems that the number of posts grows faster than one can respond to a message -:) This is good.
I wanted to notice about recent (last) Mannix message, if you can call it recent with the number of responses after it. The images presented by Mannix are nothing new. Even this is a really interesting set up but you might want to look at ?The HOOPER-MONSTEIN Experiment? in http://jnaudin.free.fr/html/hoopmnst.htm . Such a set up can generate a double voltage in the output coil and as a result increase output energy by 4 times. I did perform Mannix experiment a long time ago (about 2 years ago) but never paid attention to the voltage. I was actually looking for something else. Going to do it again. I have also done powering input coils by the pulsed current and didn?t notice anything unusual, maybe my set up was wrong. My old set up was used for inducing the power from one bifilar coil into another. But for this, you need to wind the coil in four wires instead of three. The output power was very low because of the close proximity of the bifilar coils wires but it was enough to light a led and the load didn?t affect the source whatsoever. The level of noise was below 0.0001 volt. Also, the output current was behaving very strange, to say at least, when it was used to create a resonance in another coil. I am going to test it by powering input coils with pulsed current again (with some new stuff in mind) and if anything interesting, will post it here.

Kames.

giantkiller · « **Reply #1248 on:** October 13, 2006, 04:22:20 AM »

Hi Jacob,
I will add the coil specs on page 420 to the design document that I had posted about earlier.

jacob · « **Reply #1249 on:** October 13, 2006, 04:38:00 AM »

Quote from: giantkiller on October 13, 2006, 04:22:20 AM

Hi Jacob,
I will add the coil specs on page 420 to the design document that I had posted about earlier.

Hello giantkiller,

You're doing a great job trying to summarize what has been achieved every once and awhile.

By the way, what's in the name?

Regards,

Jacob

giantkiller · « **Reply #1250 on:** October 13, 2006, 05:01:46 AM »

I am glad you ask.

The second greatest king to ever have lived is called David. At age 16 he slew a giant named Goliath. Against all odds with no support from the army of his older brothers. They trembled so that their armor shook. And David took the throne that day within the throws of adversity.
With faith and strength we all can overcome the giants in our lives. I thrive in this environment.
What I have come to realize is with the lifelong gift of Obsessive, Compulsive, Creativity is I run into those that tell me my dreams are not real. I slay the giant everytime I succeed! May we all this time around. I would like others to be part of this stride I take.
Kapeesh?

--giantkiller

argona369 · « **Reply #1251 on:** October 13, 2006, 05:40:23 AM »

rensseak · « **Reply #1252 on:** October 13, 2006, 05:54:40 AM »

just read it, its something about kick's

http://www.overunity.com/index.php?topic=1598.0;topicseen#msg14505

norbert

gn0stik · « **Reply #1253 on:** October 13, 2006, 06:19:50 AM »

Quote from: argona369 on October 13, 2006, 05:40:23 AM

spectrograph of mp3 sound file (was converted to wav)
notice the 50hz and 100 hz lines?

used spectrogram from this page

http://www.dxzone.com/catalog/Software/Spectrum_analyzers/

still, very strange to me,,,

Cliff

Here's a better image of it..

(http://www.vlf.it/romero/marconi_old.gif)

Thing is, these are usually localized "hums", for example, the "Tao hum", the "bristol Hum" etc. have been measured between 30 and 80 hz, coincidentally this is very close to the 60hz grid frequency. The above pic was measured in an area away from the grid, and away from EM polution. Notice how faint the 60hz spectogram is.

argona369 · « **Reply #1254 on:** October 13, 2006, 06:37:58 AM »

gn0stik · « **Reply #1255 on:** October 13, 2006, 06:38:34 AM »

@giantkiller, how are you handling all of the different theories and build ideas with your builders doc? I got started on something like that, but too much was(and perhaps still is) unsolidified by experimentation to actually create a builder's doc.

Perhaps I can help with it?

I've read the entire thread like 3 or 4 times, and the pertinent stuff countless times.

gn0stik · « **Reply #1256 on:** October 13, 2006, 06:41:04 AM »

Cliff, that's a 2khz, with HUGE repetitive pulses maybe a ms long. That's definitely man made, where are you located? Mil bases around? Radio towers? Any devices around, phones etc?

OH, btw, that particular shot was done in spectrum lab.. Not on my computer though. If you are interested in elf/ulf/vlf wave analysis, check out www.vlf.it

LOTS OF GOOD STUFF THERE. As well as nice tutorials for building antennas and spectrum analyzers.

argona369 · « **Reply #1257 on:** October 13, 2006, 07:00:59 AM »

gn0stik · « **Reply #1258 on:** October 13, 2006, 07:07:48 AM »

Ahh, the plot thickens!! Well, it's man made, that's for sure. hehe.. Well I would agree that those are the kicks then.

I thought you were perhaps suggesting tuning the coil to 50hz. And that would work in some places as shown by my shot.. Just not everywhere.

Yes, Marco is on to something. It's very exciting, I just wish he was moving FASTER! LOL... He's only one man though.. I'm dying to see shots of his iron coil, or his bifilar coil, if that's what he's making.

dutchy1966 · « **Reply #1259 on:** October 13, 2006, 10:54:09 AM »

Dave,

I copied this bit from the beginning of the study of our Hungarian friend:

The objective of this study is to examine whether it is possible to violate the generally accepted energy preservation thesis in the field of electromagnetic waves.

The discussion of energy correlations in the field of electromagnetic waves does not imply the restriction of this problem to a narrow area, since the laws of wave-propagation cover a wide spectrum, from sound waves to X-rays, as well as the Compton effect and the de Broglie waves related to the particles. Thus they are related to a fairly wide area of physics.

If I understand him well, he's basically saying that this phenomena is NOT restricted to magnetic waves as in his study. This might then give support for your transformer findings.

I'm thinking of getting some ferrite ringcores and wind some 1:1 transformers and then copy your experiment to see if I can find the same results. If that's the case then we're certainly onto something, right?

regards Dutchy

News:

User Menu

Author Topic: The Master Of Magnetics "Steven Mark" (Read 1242946 times)

supersam

Re: The Master Of Magnetics "Steven Mark"

jacob

Re: The Master Of Magnetics "Steven Mark"

kames

Re: The Master Of Magnetics "Steven Mark"

giantkiller

Re: The Master Of Magnetics "Steven Mark"

jacob

Re: The Master Of Magnetics "Steven Mark"

giantkiller

Re: The Master Of Magnetics "Steven Mark"

argona369

Re: The Master Of Magnetics "Steven Mark"

rensseak

Re: The Master Of Magnetics "Steven Mark"

gn0stik

Re: The Master Of Magnetics "Steven Mark"

argona369

Re: The Master Of Magnetics "Steven Mark"

gn0stik

Re: The Master Of Magnetics "Steven Mark"

gn0stik

Re: The Master Of Magnetics "Steven Mark"

argona369

Re: The Master Of Magnetics "Steven Mark"

gn0stik

Re: The Master Of Magnetics "Steven Mark"

dutchy1966

Re: The Master Of Magnetics "Steven Mark"