Author Topic: The Master Of Magnetics "Steven Mark" (Read 1242930 times)

supersam · « **Reply #1020 on:** October 06, 2006, 07:11:37 AM »

tao,

it appears to me both directions. what is wrong with that. steven did say that current could flow both ways at once. but it does look like a collision and or maybe some kicks are going to happen. what do you think? it looks like you would have something interesting happening with different frequencies, and different directions of magneticfields. can't wait to see how you are going to tune these two frequencies to resonate.

lol
sam

c0mster · « **Reply #1021 on:** October 06, 2006, 07:40:09 AM »

To All

I have put together a list of videos of my experiments tonight. http://cmnet.ca/projects/roundcoil/index.html. Sorry they are individual movies I didn?t have the time to put it all together with a movie editor. If you watch the movies in order you can follow the tests. I think you will find the results interesting.

C0mster

exnihiloest · « **Reply #1022 on:** October 06, 2006, 12:42:56 PM »

It is said : "The skeptics might say that the above-determined violations of the energy conservation are valid only locally for that small volume....
Therefore while gaining excess of energy in some places, we would loose the same amount at other places, and if the total energy balance were calculated for the whole space, then the law of energy preservation would remain valid. This explanation is however wrong and it can be disproved easily with careful and exact calculations even for practical cases, as Mr. Vajda has done it in his study."

How could it be disproved ? I didn't read any convincing argument. Any amateur radio operator knows that several EM sources create interferences in space. Waves add in some places and destroyed each other elsewhere, depending on the distances between the target and each source.
For example the waves from two equal synchronized sources add when the difference between the distances from the target to each source is a even number of half wave lengths, and substract when it is an odd number.
This principle is used by all directional antennas, even those with only one source connected to the transmitter such as Yagi antennas but where many reflecting or diffracting elements act as secondary sources. The result is that the radiated energy is concentrated in some places of space giving illusion of an energy gain when comparing to an isotropic source: in fact the radiated energy we can tap in whole space is the same.

Fran?ois

c0mster · « **Reply #1023 on:** October 06, 2006, 04:30:39 PM »

Quote from: -[marco]- on October 06, 2006, 02:13:10 PM

Quote from: c0mster on October 06, 2006, 07:40:09 AM
To All

I have put together a list of videos of my experiments tonight. http://cmnet.ca/projects/roundcoil/index.html. Sorry they are individual movies I didn?t have the time to put it all together with a movie editor. If you watch the movies in order you can follow the tests. I think you will find the results interesting.

C0mster

hi cOmster

nice videos

Thanks Marco
Here again are the results across the 33ohm resistors: Input side .21V * .006 Amps = .00126 watts. Output side: .50v * .0149A = .00745 Watts. Pulse is 10 % on time 90% off at 3.57KHz. My next challenge is to develop a circuit to take the .00619 gain in wattage and replace it back into the driver. I should be able then to replace the driver battery with a capacitor, charge the cap, turn on the unit and have the cap never run down. Perhaps the kicks being referred to are the BEMF spikes produced in the driver coil.

To infinity and beyond.

C0mster

supersam · « **Reply #1024 on:** October 06, 2006, 05:35:45 PM »

Quote from: Kosh on October 06, 2006, 11:51:33 AM

We should do the experiment SM suggested. A 5U4 rectifier with separated transformers and some phase control.

Quote
Now the high voltage power goes through the cathode and travels through the coils of the 5 volt transformer along with the 5 volt AC. If the plate voltage is not rectified then it is AC with a potential 60 Hz frequency. That combines with the 5 volt 60 Hz in the coil of the heater transformer and generally amounts to nothing. In fact the power of the 5 volt transformer amounts to nothing. It is an insignificant power supply except when the two transformers get slightly out of phase with each other, or when they are connected in reverse of one another.

Then you can measure all kinds of things going on. You can generate all kinds of hash and multiple frequencies, and I do mean all kinds. What I measured during this process was very interesting. All these frequencies occasionally met at the same time with a much larger kick at the output.

tao,

is this the tree you are barking up? so what is wrong with having the magnetic fields going in different direction inside the colector coil? it looks to me like your setup could do this with the right tuning. or do think it is enough to have the fields just traveling around in different directions in the collector coil, slightly out of phase, to make the kicks?

lol
sam

giantkiller · « **Reply #1025 on:** October 06, 2006, 06:16:30 PM »

I don't think this a postulate or theory.
Just read...

Prior posts referenced are the Freak wave video and the Coke and speaker demo.

The gentleman with the coke and speaker demo talked about the sun emminating waves that go out and comeback. Nothing new. When returning, these collide with another outgoing set and the collision thats are the most in sync polarity wise create orbits where obviously balanced matter would sit. SM said the tuning had to do the coil's circumference. Could this antennae be right at a tuned Freak wave conjunction? I think so. The ham radio people would have to agree based on the fact that part of the reception tuning is an antennae of a certain mass, length equaling surface area.

The freqs used were 7.4 and 7.8 the diff is 400hz. I just put that out there. Hadn't seen that number relayed yet.

So I would then think that the collector is tuned to 400 hz while the two generated input freqs create the freak wave or harmonic collision at the coil's circumference. Where , lo and behold, there just happens to be an antennae sitting!

Hey, SM said it was simple.

Challenge me or call me wrong....

giantkiller · « **Reply #1026 on:** October 06, 2006, 06:19:56 PM »

Repost:
That would .4 hz.

giantkiller · « **Reply #1027 on:** October 06, 2006, 06:44:53 PM »

@Marco
And that is exactly what I am here for friend...

If you gander through all my previous posts, I have always diatribed the most simplest of explanations about current past work, current work and the applications that are just ahead of us.

@thank you comster for documenting what you have done. The setup you have is exactly what I have. I use bigger copper therefore I need more power and the steps with small copper are getting all of us in the right direction.

SMxx is interesting in that he uses big copper with small power. I need this stage for my next steps. The only thing I have to contend with is getting fire retardant insulated wire. Or loose turns so they don't touch. But that makes a bigger device. Could be useful.

--giantkiller

I slay giants..

Anybody up for lunch at the 'Sea of Galilea' restaurant?

giantkiller · « **Reply #1028 on:** October 06, 2006, 06:57:41 PM »

@Kosh
Very good. In the SM17, he runs a tv and you can see a picture. It doesn't matter what the grid freq is 50/60. To run a tv you need AC. The light and probably the drill could run of of DC. ?But the coils vibrate and that denotes a base freq or strong harmonics of some type. If he can get strong harmonics from hash then he truly has done a miracle. And besides, have we seen the hash measurements? More symantics, just like the 'There is no power source that can produce this kind of output.' Once again, true. But that doesn't mean there isn't a small starter source. He still throws a switch. A charged cap?

Pigs fly...

Wanna go whale watching off the shores of Nova Scotia?

giantkiller · « **Reply #1029 on:** October 06, 2006, 07:14:33 PM »

The waves don't have to continue leaving. On the downside of the signal the field collapses back to the source. Back EMF.
Your IRF840s have internal bypass diodes. So that part you won't see.
But RF is only the speed range of the magnetic wave.
The collector coil is computed to .4hz and sits at the peak intensity of it. Different tuning or running freqs won't Freak! (massive unity) at that point in space.
Transmission, collapse, transmission, harmonic.
Transmission, collapse, transmission, harmonic.
Transmission, collapse, transmission, harmonic.
Transmission, collapse, transmission, harmonic.

'I gotta go visit a friend in Corazol'. The fishing is great there.

giantkiller · « **Reply #1030 on:** October 06, 2006, 07:20:34 PM »

http://www.coverpop.com/whitney/
At certain harmonics all the waves hit the line, the collector.

'Then I gotta got to Kioto to see a play'.

giantkiller · « **Reply #1031 on:** October 06, 2006, 08:21:41 PM »

This makes the grand assumption that the SM3 and the SM6 use the same freq. 7.8hz.

The edge of the SM3 sits on the inside of the Feak wave and the & SM6 sits on the outside of the Freak wave. If these little devices were right in the middle of the wave (dia of 4.5") they would burn up. So the dia of the 17" could sit in the middle of its large harmonic. But SM uses 2 other freqs to put a smaller Freak wave at that distance. If he decided to use the one freq natural model, the materials in the SM17 couldn't withstand it.

So then, depending on the the desired output you want to control, the diameter & the materials controls the choice of your 1 freq or 2 freqs model.

I said it before: I need fat copper and a reactor. But now just the copper will do.

argona369 · « **Reply #1032 on:** October 06, 2006, 09:20:36 PM »

c0mster · « **Reply #1033 on:** October 06, 2006, 11:18:25 PM »

Good News I stiched all the movies together for easer viewing.
http://cmnet.ca/projects/roundcoil/roundcoilfull.wmv
C0mster

mikestocks2006 · « **Reply #1034 on:** October 06, 2006, 11:38:02 PM »

Quote from: ctglabs on October 06, 2006, 07:39:53 PM

Hi all,

....
SM says it is very simple, just coils...

Waiting on your thoughts.

Regards,

Dave.

Hi Dave, do you or anyone else here knows if the SM toroid is with closed ends? (one continuous piece of wire? The 2 ends soldered or crimped together?) and then the out put is stepped up with other coil(s) inside that toroid?

As an example using the formulas for toroid with no added capacitors, and only its own self capacitance calculations, it results to a base resonant a frequency of 1.78 MHz
For the following configuration
Toroidal radius 10 cm (to centerline of coil radius)
Coil radius 2 cm
Number of turns 500
Air core

What would happen if the toroid is placed in a proximity of a field of approx 1.8 MHz?
Will the wires melt? Will it start ?kicking? if the pase is slightly off? Will the energy keep on building up inside the toroid?s field? To what levels?

To get to 7.8 Hz and with use of an external capacitor
An example configuration, calculates
External C approx 39mF
Toroidal radius 10 cm
Coil radius 4 cm
Number of turns 1000
Air core

What that do it? Using a permanent magnet to start the first oscillation and then let the geofield take over?

News:

User Menu

Author Topic: The Master Of Magnetics "Steven Mark" (Read 1242930 times)

supersam

Re: The Master Of Magnetics "Steven Mark"

c0mster

Re: The Master Of Magnetics "Steven Mark"

exnihiloest

Re: The Master Of Magnetics "Steven Mark"

c0mster

Re: The Master Of Magnetics "Steven Mark"

supersam

Re: The Master Of Magnetics "Steven Mark"

giantkiller

Re: The Master Of Magnetics "Steven Mark"

giantkiller

Re: The Master Of Magnetics "Steven Mark"

giantkiller

Re: The Master Of Magnetics "Steven Mark"

giantkiller

Re: The Master Of Magnetics "Steven Mark"

giantkiller

Re: The Master Of Magnetics "Steven Mark"

giantkiller

Re: The Master Of Magnetics "Steven Mark"

giantkiller

Re: The Master Of Magnetics "Steven Mark"

argona369

Re: The Master Of Magnetics "Steven Mark"

c0mster

Re: The Master Of Magnetics "Steven Mark"

mikestocks2006

Re: The Master Of Magnetics "Steven Mark"