Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search
« previous next »
Pages: 1 ... 430 431 432 433 434 [435] 436 437 438 439 440 ... 1586   Go Down

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11832623 times)

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6510 on: November 06, 2014, 10:02:16 PM »
Quote from: Hoppy on November 06, 2014, 09:27:14 PM
Some more encouraging news. I changed the load to a 40W clear bulb so that I could clearly see the glowing filament. On the previous experiments, I had forgotten to carefully insert the ferrite rods into the Kacher tube to tune frequency to 1.316MHz. I was just pushing the rods up and down the tube and of course constantly changing the Kacher frequency  - doh!. ::) Now having tuned properly, I can clearly see that as the Kacher waveform approaches maximum amplitude, the lamp filament does start to pulsate and I can change the pulse frequency by making very slight adjustments to the positioning of the ferrite rods.  :) The bulb also changes slightly in brightness level. I'm getting a short purple streamer off the end of the antenna. The Kacher frequency without the ferrite rods inserted is about 2MHz.

That's good Hoppy! If you are sure for the frequency why don't you wind more turns to your katcher (instead lowering with ferrite) to achieve it so to make your output voltage higher?

Logged

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6511 on: November 06, 2014, 10:22:05 PM »
Quote from: itsu on November 06, 2014, 10:35:17 AM
I can try that, but i doubt that in 1 LC circuit the current before or after a capacitor is suddenly shifted 90 degrees.
.....................
Regards Itsu

ok, current transformer moved behind the cap, but as expected no change in signals, see screenshot.

Yellow is voltage across the grenade
blue is the voltage from the current transformer between cap and bifilar coil
purple is the gate signal from one of the MOSFETs for frequency reference/triggering

The kacher was not activated in the video, but even when activated, no change in phase is detected.

In the video i tune / detune the TL494 frequency to show that the voltage and current stays in the same relationship whether in resonance or not.

https://www.youtube.com/watch?v=v9jCT3L9ygs&feature=youtu.be

Regards Itsu
Logged

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6512 on: November 06, 2014, 10:54:39 PM »
Quote from: Jeg on November 06, 2014, 10:02:16 PM
That's good Hoppy! If you are sure for the frequency why don't you wind more turns to your katcher (instead lowering with ferrite) to achieve it so to make your output voltage higher?

Hi Jeg,

Yes, that's a thought but I'm getting a 5mm streamer from the end of the antenna, so I'm not sure that more voltage is really needed?
Logged

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6513 on: November 06, 2014, 11:15:24 PM »
Quote from: Hoppy on November 06, 2014, 10:54:39 PM
Hi Jeg,

Yes, that's a thought but I'm getting a 5mm streamer from the end of the antenna, so I'm not sure that more voltage is really needed?

You are maybe right. 5mm are already good compares to what ruslan showed.
Logged

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6514 on: November 07, 2014, 12:29:46 AM »
How about a couple of pics?  Hoppy.
Logged

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6515 on: November 07, 2014, 01:32:55 AM »
   Itsu:
   Seams like you're getting close...
   I would try tuning using some different caps, with the Kacher on, as well.

   I have noticed the same thing, as far as that the higher amplitude does not always mean brighter bulbs.
   I would still try on different wattage bulbs, as they are also part of the circuit, and have much influence on the output and bulb brightness generated by the device.
   
   
   
Logged

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6516 on: November 07, 2014, 02:33:10 AM »
Quote from: Hoppy on November 06, 2014, 09:27:14 PM
Some more encouraging news. I changed the load to a 40W clear bulb so that I could clearly see the glowing filament. On the previous experiments, I had forgotten to carefully insert the ferrite rods into the Kacher tube to tune frequency to 1.316MHz. I was just pushing the rods up and down the tube and of course constantly changing the Kacher frequency  - doh!. ::) Now having tuned properly, I can clearly see that as the Kacher waveform approaches maximum amplitude, the lamp filament does start to pulsate and I can change the pulse frequency by making very slight adjustments to the positioning of the ferrite rods.  :) The bulb also changes slightly in brightness level. I'm getting a short purple streamer off the end of the antenna. The Kacher frequency without the ferrite rods inserted is about 2MHz.

hi Hoppy,

May i ask the "frequency of the PWM generator" which you previous set to get bulb to go into pulsing mode.
We now know your Kacher Frequency is 1.316Mhz

I merely wanted to know from your end if at 60th harmonics which waveform is aligned only then you get to see a pulsing bulb.

At my end no progress was done for last few days since the video.Only some basic fact findings on capacitor which i have mentioned less than 24hour ago.

At my end the pending 2 outer coil is not added along with cw,ccw on ferrite rod.

I will start with outer coil today along with cw,ccw ferrite rod but no support for pvc pipe.Just using the box as shown in video for now.

Logged

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6517 on: November 07, 2014, 08:24:53 AM »
Thank you, Itsu. And can you show that be like in that picture?
Multilayer coil, diodes and capasitor can be not removed.
Logged

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6518 on: November 07, 2014, 09:34:11 AM »
Quote from: Hoppy on November 06, 2014, 10:54:39 PM
Hi Jeg,

Yes, that's a thought but I'm getting a 5mm streamer from the end of the antenna, so I'm not sure that more voltage is really needed?

Hoppy,

5mm is very long, is that across the whole "tuning range" when using the ferrite or does it peak at a certain frequency?

My Kacher is running at 1.9MHz at 36V / 1A, but produces minimum streamers then of 0.5mm, but when tuning with the
ferrite rod, it peaks around 1.1MHz with 3mm streamers (tuning done via scope probe laying nearby for max. amplitude).

Regards itsu

Logged

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6519 on: November 07, 2014, 10:03:38 AM »
hi everyone,

This is my latest findings in the afternoon at resonance to achieve maximum peak to peak voltage across 1uf.I noticed the bulb isn't as bright.Until i approach just close to resonance to observe the
similar bulb brightness as shown by itsu in the most latest video as posted around 24hours ago.

Another interesting discovery upon connecting 5uf 900volts snubber capacitor in parallel with 60watt bulb.There is increase in bulb intensity noted.

I have attached to show the difference with and without 5uf 900volts snubber capacitor which is connected in parallel with the bulb.

I have completed windings 28turns and 12-0-12 turns using 4mm sq on my nano-crystalline toroid.

I am now using the attached circuit diagram related to connection to bulb with 600volts diode at the kapanadze winding.

The attached watt meter is the total power consumption which also includes the kacher coil which the antenna is not assembled.

----------------------------------------------------

Side Note-The 3 turns to 28 turns on my toroid reminded my of my ultra lowest low voltage 25mV joule thief which the source is the high current but low voltage peltier.
Since i also recall Akula did mentioned about current movement.This is where the 3.5 turns 6mm sq wire come into play from the earth.

The outer winding over 25 turns will be completed later.
Logged

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6520 on: November 07, 2014, 10:48:59 AM »
Quote from: magpwr on November 07, 2014, 02:33:10 AM
hi Hoppy,

May i ask the "frequency of the PWM generator" which you previous set to get bulb to go into pulsing mode.
We now know your Kacher Frequency is 1.316Mhz

I merely wanted to know from your end if at 60th harmonics which waveform is aligned only then you get to see a pulsing bulb.

At my end no progress was done for last few days since the video.Only some basic fact findings on capacitor which i have mentioned less than 24hour ago.

At my end the pending 2 outer coil is not added along with cw,ccw on ferrite rod.

I will start with outer coil today along with cw,ccw ferrite rod but no support for pvc pipe.Just using the box as shown in video for now.

Hi Mag & all,

The PWM frequency is 21.9KHz. As I previously commented, the pulsing is primarily an interaction between the grenade and inductor coils and only appears when the inductor coil is tuned to resonance, max voltage amplitude across the cap (480 / 490nF). The lamp pulses even without the Kacher powered up. However, when the Kacher is running, the amplitude of the secondary coil voltage does affect the pulse rate. Slight adjustment of the PWM frequency either side of the 'sweet spot', in my case about 21.9KHz provides full control over the pulse frequency. It may be that the onset of lamp pulsing is a convenient indicator as to when the inductor coil hits the 60th harmonic of the grenade coil. As a side issue to this, I have attached a scope shot to show how the waveform (scoped IGBT drain to source) is affected by the Kacher HV oscillations.
Logged

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6521 on: November 07, 2014, 10:54:31 AM »
Quote from: itsu on November 07, 2014, 09:34:11 AM
Hoppy,

5mm is very long, is that across the whole "tuning range" when using the ferrite or does it peak at a certain frequency?

My Kacher is running at 1.9MHz at 36V / 1A, but produces minimum streamers then of 0.5mm, but when tuning with the
ferrite rod, it peaks around 1.1MHz with 3mm streamers (tuning done via scope probe laying nearby for max. amplitude).

Regards itsu

Itsu,

I have drawn the spark again today a few times and yes, its more like 3mm, possibly 4mm long, so it does appear that mine is no longer than yours.  ;)

The spark length peaks around the frequency I tuned the Kacher - 1.316MHz, same as grenade frequency.

Regards
Hoppy
Logged

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6522 on: November 07, 2014, 11:08:50 AM »
...
Logged

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6523 on: November 07, 2014, 11:10:02 AM »
All,

here it is presented that the latest Ruslan 24V system works with these value's"

http://www.overunity.com/12736/kapanadze-cousin-dally-free-energy/msg421510/#msg421510

push-pull osc:  34.15KHz
series cap 1.2uF
bifilar coil 18.75m (2 layers Tesla way)

When using an online resonance calculator like:  http://www.1728.org/resfreq.htm

it shows that for reaching 34.15KHz, with a capacitor of 1.2uF the inductance of the bifilar coil needs to be 18.26uH
This is very low as i measured my 3 layers bifilar coil to be 246uF (18.75m)

Now that i have 2 layers, so about 12m, it still measures 111uH.
With 1.2uF it will resonate at 13KHz which is far away from the mentioned 34.15KHz

Questions:

Do we know if the new setup really resonates at 34KHz?
Do we know if the new setup really uses 1.2uF capacitor?
Does this mean that the 18.75m (or less) bifilar coil has an inductance of only 18uH?
If so, how does one get such a low inductance with a 18.75m 2 layers coil? (bifilar way, but in opposite directions?)

 
Regards itsu
Logged

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6524 on: November 07, 2014, 11:40:40 AM »
Quote from: itsu on November 07, 2014, 11:08:50 AM
...


The spark length peaks around the frequency I tuned the Kacher - 1.316MHz, same as grenade frequency.

Voltage is around 1KV and current drawn by Kacher at tuned frequency is 0.68A. The voltage figure is not reliable as my HV probe (home made) is loading the secondary too much.

Regards
Hoppy
Logged
Pages: 1 ... 430 431 432 433 434 [435] 436 437 438 439 440 ... 1586   Go Up
« previous next »