Author Topic: Electrical igniter for gas engines A keystone to understanding by Magluvin (Read 251473 times)

ramset · « **Reply #435 on:** April 27, 2010, 02:47:23 PM »

So Teets

Is your brother gonna let you play "domino's "
With Mag's new motor?

Maybe put some "Nitrous" in that bad boy?

Huh?
[its a motor , you want one for the kids bike!]

Chet

Magluvin · « **Reply #436 on:** April 27, 2010, 08:38:21 PM »

Ram
Teets does not really care that this could help everyone. He is looking out for himself.
Sure he bragged a lot that he has it and he even has better newer ideas, but thats all he wants us to know, otherwise we would know something by now.
He has gotten what he needed from everyone here but they get nothing in return. It shows his character.

So I would not even bother posting requests from him, but you can if you wish. I dont think it will be beneficial. =[

Mags

Cherryman · « **Reply #437 on:** April 27, 2010, 11:33:19 PM »

Sorry for interrupting, just one commend

As i was reading this topic i noticed the discussion about a "loose" wire, or an abrupt "ending"

It reminds me of "water hammering" Not sure of the english term (cavitation?) . It happens sometimes when you close a tap you can hear a loud "bang" in the plumming system.

Now put that into electrics:

Maybe there should be some kind of a pick up coil around/at the loose end to "catch" that stopping shock.

forest · « **Reply #438 on:** April 27, 2010, 11:54:03 PM »

Quote from: Cherryman on April 27, 2010, 11:33:19 PM

Sorry for interrupting, just one commend

As i was reading this topic i noticed the discussion about a "loose" wire, or an abrupt "ending"

It reminds me of "water hammering" Not sure of the english term (cavitation?) . It happens sometimes when you close a tap you can hear a loud "bang" in the plumming system.

Now put that into electrics:

Maybe there should be some kind of a pick up coil around/at the loose end to "catch" that stopping shock.

YEEEEESSSS!

Magluvin · « **Reply #439 on:** April 28, 2010, 01:08:10 AM »

Tesla said that he believed that the electric flow has inertia. So if you cut it off abruptly, there will be still something coming from the end for a short period of time. And while it is exiting, we are no longer pulling from the source, so all energy in is accounted for and ceased. So what flow exists can be used to do work, AND what went out will need to come back to fill the void created by the inertia, and that can be used to do work also. And if it resonates well with the load, there should be more energy out than in.

Mags

Tito L. Oracion · « **Reply #440 on:** April 28, 2010, 03:28:02 AM »

Quote from: Magluvin on April 27, 2010, 08:38:21 PM

Ram
Teets does not really care that this could help everyone. He is looking out for himself.
Sure he bragged a lot that he has it and he even has better newer ideas, but thats all he wants us to know, otherwise we would know something by now.
He has gotten what he needed from everyone here but they get nothing in return. It shows his character.

So I would not even bother posting requests from him, but you can if you wish. I dont think it will be beneficial. =[

Mags

Hi everyone good day

i'm sorry everyone, i thought i have given you the closest clues i could give. to the clues i gave, all what we need is hard work, experiment and unlimited imagination ok.

let me give you something to think:
Every word is composed of letters and sometimes words are long or short but these words are nothing if they are not used in a sentence and it is more better if sentence is use in a big poem, and or a book.

and many times all what we need in a big story is the gist so that other could grab it easily.

@mags
i've learned many things here, i admit that but they are nothing more than a big clues, and they are nothing if there is no hard work and experiment ok.

That means my success is not from here but from hard work and experiments and you know what? accidents are just normal in my life everyday in my experiment. then you want me to give it just right away. hmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm!

One time in one of your letter to me, you said that you are also not giving some important info in this forum am i right mags? $:-\$

i think you play the same thing

God Bless you
Richard Rosenthal

Tito L. Oracion · « **Reply #441 on:** April 28, 2010, 03:30:41 AM »

by the way you can't see me cause i'm not stupid moron to put info's of mine in the internet. hahahahahahahahahahahhaha!

Tito L. Oracion · « **Reply #442 on:** April 28, 2010, 03:37:08 AM »

SWITCHING?

OF COARSE IT SHOULD BE FASTER BEFORE CURRENT FLOWS IT SHOULD BE IN OTHER STATE POSITION. SO THAT THE VACUUM EFFECT WILL RUN. GOT IT!

THAT'S WHY WE ARE GETTING ENERGY FROM THE VACUUM OK!

Magluvin · « **Reply #443 on:** April 28, 2010, 03:45:51 AM »

For one, I have not asked anything of you for a good bit of time here Teets. It does no good. I have learned that.

And two, I was just telling ram that he is basically wasting posts. You will not give as you said, again and again. Its all here and everyone pretty much feels the same. Yet one day you will again say that you will show pics and vids and drawings, as you have done again and again, but it will never happen and we are used to it by now. You are just one of those guys that says and never does.

And three, you can try and turn this all on me, but what we discussed is just an increase in efficiency, not an OU situation. You are the one that claims trifilar yet zero explanations, just that we need salt to make crackers. Thats a bit of nothing.

And four, There are many here that feel the same as me, and the ones that mean it will post here about it as they normally do.

Thanks for nothing but wasted space on my thread.

Mags

Magluvin · « **Reply #444 on:** April 28, 2010, 03:50:04 AM »

Quote from: Tito L. Oracion on April 28, 2010, 03:37:08 AM

SWITCHING?

OF COARSE IT SHOULD BE FASTER BEFORE CURRENT FLOWS IT SHOULD BE IN OTHER STATE POSITION. SO THAT THE VACUUM EFFECT WILL RUN. GOT IT!

THAT'S WHY WE ARE GETTING ENERGY FROM THE VACUUM OK!

Nope dont got it. We are just stupid pieces of meat with eyes. Maybe we need 1 in. thick glasses, but I dont see how that will help. Your clues are just salt on the cracker. Nothing.

Mags

Tito L. Oracion · « **Reply #445 on:** April 28, 2010, 04:02:06 AM »

Well, salt from cracker, they are tasteless without salt.

wasting space in your thread?

well this thread is nothing without salt

Magluvin · « **Reply #446 on:** April 28, 2010, 04:28:09 AM »

And salt is nothing without everything else. Say salt is a magnet, well what do we do with that magnet? Nothing without other magnets, coils, transistors, diodes, quality bearings, mechanisms, etc. And then its how to put it together. We that do put things together and show, we know that we need these other ingredients. We know that salt is worthless without the tasty foods that it compliments.

Hey teets, Im not here to argue with you, but you are here to tell me nothing. I know you think you have given too much, what ever that is. So just let it go dude. Enjoy your great works, as we will enjoy ours.

Mags

Magluvin · « **Reply #447 on:** April 28, 2010, 06:31:11 AM »

I have found some transformers with bifi coils that are in parallel that can be made to be bifi in series with a little soldering. I wonder if it would be an advantage to do so. I have seen many like this but all in parallel, never in series as Tesla claims that there is more energy stored this way in an inductor.
Here is my stuff, and Im still digging for my relays.
Mags

Tito L. Oracion · « **Reply #448 on:** April 28, 2010, 08:41:16 AM »

ok, fine!.

Magluvin · « **Reply #449 on:** April 28, 2010, 10:28:22 AM »

Loner
Thanks for the feedback. Im just wondering if a bifi primary of a transformer can help to get more out of the secondary as compared to a regular wound primary. Wouldnt that be sweet. =]

Mags

News:

User Menu

Author Topic: Electrical igniter for gas engines A keystone to understanding by Magluvin (Read 251473 times)

ramset

Re: Electrical igniter for gas engines A keystone to understanding by Magluvin

Magluvin

Re: Electrical igniter for gas engines A keystone to understanding by Magluvin

Cherryman

Re: Electrical igniter for gas engines A keystone to understanding by Magluvin

forest

Re: Electrical igniter for gas engines A keystone to understanding by Magluvin

Magluvin

Re: Electrical igniter for gas engines A keystone to understanding by Magluvin

Tito L. Oracion

Re: Electrical igniter for gas engines A keystone to understanding by Magluvin

Tito L. Oracion

Re: Electrical igniter for gas engines A keystone to understanding by Magluvin

Tito L. Oracion

Re: Electrical igniter for gas engines A keystone to understanding by Magluvin

Magluvin

Re: Electrical igniter for gas engines A keystone to understanding by Magluvin

Magluvin

Re: Electrical igniter for gas engines A keystone to understanding by Magluvin

Tito L. Oracion

Re: Electrical igniter for gas engines A keystone to understanding by Magluvin

Magluvin

Re: Electrical igniter for gas engines A keystone to understanding by Magluvin

Magluvin

Re: Electrical igniter for gas engines A keystone to understanding by Magluvin

Tito L. Oracion

Re: Electrical igniter for gas engines A keystone to understanding by Magluvin

Magluvin

Re: Electrical igniter for gas engines A keystone to understanding by Magluvin