@a.king21,


I support what Zeitmaschine says. And if you would do an "instructable", please PM me the link too 


truesearch

Then people dying due to lack of energy also do not deserve it?

But if this forum is the problem, then just do an instructable in a different forum and PM me the link.

The basis of the device has been open sourced by Bedini. It is the SG oscillator.
If you put the Bedini oscilator in place of the frequency generator in TK's patent
you will understand the process. However remember that TK uses AC so you need to double up on the SG circuit pulsing alternatively one way then the other.
I thought for a long while that the TK device generates HV. After speaking with him recently
I realised my mistake. His device generates radiant energy and HV is a byproduct of the
process. But radiant energy is lethal to electronic devices, so look at TK's HV shielding.
This link will help :http://www.energyscienceforum.com/sg-radiant-oscillator/125-sg-radiant-oscillator-8.html
I would advise you to go to Bedini's homepage and learn from the great man.
You generate radiant energy by switching a DC circuit on and off at speed.
It's so simple you gotta laugh.

You might also look at Tesla's patent of the magnifying transmitter. TK is using the same principle just using 21st century components.

The basis of the device has been open sourced by Bedini. It is the SG oscillator.
If you put the Bedini oscilator in place of the frequency generator in TK's patent

Did you know that one Bedini oscillator can drive 12 batteries?? That's his secret. In plain sight.
So everyone is messing with lots of coils and stuff. Just wind a quad coil or more and see what happens.
I did many variations on Bedini -they all worked- but I was fed up with low power stuff, that's why I analysed TK's device.
Now I'm certain I've figured it out. Time to experiment and build. If you read about Tesla on Bedini's home page he explains it brilliantly. Remember radiant energy is hard to contain - that's why you can charge 12 batteries at once! That's why TK has so much anti-static insulation in his builds. Think about it - why put epoxy resin on a solder joint otherwise?
Why does TK's device not generate heat?  Cold electricity!
Why is it so light for a 2 kw or more device? Radiant energy does not work with a normal heavy trafo. So TK uses his air coils insulated with polystyrene. In plain sight. Those coils are the only thing which can produce the KWs.
Oh and as Bedini says the coils must be Bifilar. So are Tariel's.

You have to understand that I am subject to a confidentiality agreement and can only disclose so much. You are free to accept or reject what I say. If you go back through my posts you will see everything explained there.
I agree that power has to be maintained. However, Bedini does not loop his device. If you read his book "free energy generation" it states that you can have a COP of infinity if you loop it. In one of his videos he hints "why has no-one ever put an inverter in the device?"
TK states openly that he uses a small part of his output to power the input.
In TK's patent nowhere does he have a HV generator. Nowhere. But he has a frequency generator. What is a frequency generator? A device which pulses a current on and off. That's what frequency is. Cycles per second. I have said before that the reason I know about bifilar is because he told me. I also said that in some builds he uses caduceus and maybe that's his development of the coiling. Either way he needs to minimise Lenz. Bedini does it by twisting his wires. But Bedini works at a battery voltage level, whereas TK works at a mains level.
It is almost impossible to spot a bifilar winding. The looped part can be covered up by the same coil on the same former.
Even if you see a loop as I believe is partly seen in the aquarium 2, it is only an indication, not proof.
You are free to put forward other suggestions of course, like anyone else.
So can you tell me what kind of frequency pulsing creates a need for HV shielding and a wet earth? I'm all ears and willing to learn like everyone else.
Also remember I get PM's and some have indicated encouraging results.
My gut reaction is that the coils need to have some Lenz minimisation winding.
I have seen confidential reports by Boyce for instance. So based on all info I can see a common thread emerging with most of the OU devices.
I tried winding a TK coil using ordinary mains wire. Result total disaster. Now I have wound one using HV cable and it is much better.
The  common knowledge stuff re Bedini: He state a couple of months back in the link I provided that he was not allowed by the patent office to put multiple branches (laminar) into his patent by the patent office. So the common knowledge you refer to is not official until a couple of months back.
I back up everything  I post with facts. It is up to the reader to check them.
So my view is that the permanently connected power supply in TK's builds is powered by the loop back from his cop = infinity device.
In any case he says as much in the transcript from the 2004 video recently posted except he says 400 watts in - 5 to 8 K watts out.
So his 2004 device is powered by a permanent 400 watts inverter, although powered by his output nowadays. The info is all there and open sourced. We just have to connect the "dots".
It would be good if someone else could see what I can see and assist in the decoding of his "patent".