This is to support Wladimir Utkin Theory.


A model is discussed for magnetoelectric (ME) effects in a single-crystal ferrite–piezoelectric bilayer on a substrate. The specific focus is on coupling at magneto-acoustic resonance (MAR) at the coincidence of ferromagnetic resonance in the ferrite and thickness modes of the electromechanical resonance in the piezoelectric. The clamping effect of the substrate has been considered in determining the ME voltage coefficient and applied to a model system of a bilayer of lead zirconate titanate (PZT) and yttrium iron garnet (YIG) on a gadolinium gallium garnet substrate. The theory predicts a giant ME effect at MAR due to interaction and transfer of energy between elastic modes and the uniform precession spin-wave mode. It is shown that the ME coupling strength decreases with increasing substrate thickness. Estimates for YIG–PZT for nominal film parameters predict MAR at 5 GHz and ME coefficients on the order of 5–70 V cm−1 Oe−1. The phenomenon is of importance for the realization of multifunctional ME sensors and transducers operating at microwave frequencies.

http://iopscience.iop.org/0022-3727/42/21/215001/

Wesley

Tesla's 'extra coil' was outside the inductive coupling range, and was excited by other means. We've played with a small Tesla coil sitting within the electrostatic field of a big Tesla coil, but outside direct inductive coupling, using an independent ground. It gets quite active. No real sense of how the extra coil 'loads' the main coil, but it seems that if you keep it at a distance, it doesn't load the main coil. So it is clear that electrostatic fields can induce resonance pretty well. Having the two at right angles would ensure that the coupling was purely electrostatic, not magnetic.


Thinking about Cosmo's experiment....

The high voltage high frequency coil will generate a strong electrostatic field. Is it possible that the electrostatic field has a stronger effect on the magnetic domains of the ferrite than the magnetic field from the low voltage coil? Possibly affecting the ferrite at an atomic level? If it were an electrostatic effect, and not a magnetic effect, that suggests that a magnetic field could be switched off with no real power dissipation. I can think of many good uses for that. Big question is whether it is frequency dependent (atomic resonance) or field intensity dependent (big voltage). Care to comment Cosmo?

just try experiment what i provide, for simplicity in the second coil put 12v 50Hz signal, place near coil a magnet and you will be hear effect with HV and without HV - just try it. (domains i not really understand how they turning and doing the job, I'm not atomic engineer - this explaining come from SR, i only constating a fact... time goes and i realise that there are more than only domains or SR not telling all - and SR hide it for very strong reasons and i understand why it hide it)

anyway, i write book, and after two, three weeks i think i finish it. there you will find very interesting things about ED.Leedskalnin's and some other stuff - mostly about Free energy phenomena and why there are metaphysics background behind the scenes - by the way, some facts are explaining Tesla i only collecting it together based on my experience and researches.

i better place here book than make posts. and all what i get is mostly negative and destructive energy.

So... Be patient and wait for book, it will be free.

just try experiment what i provide, for simplicity in the second coil put 12v 50Hz signal, place near coil a magnet and you will be hear effect with HV and without HV - just try it. (domains i not really understand how they turning and doing the job, I'm not atomic engineer - this explaining come from SR, i only constating a fact... time goes and i realise that there are more than only domains or SR not telling all - and SR hide it for very strong reasons and i understand why it hide it)

anyway, i write book, and after two, three weeks i think i finish it. there you will find very interesting things about ED.Leedskalnin's and some other stuff - mostly about Free energy phenomena and why there are metaphysics background behind the scenes - by the way, some facts are explaining Tesla i only collecting it together based on my experience and researches.

i better place here book than make posts. and all what i get is mostly negative and destructive energy.

So... Be patient and wait for book, it will be free.

My ferrite is still days away and my overseas stock will not arrive until the end of October, I guess its a customs thing.

Also I spoke in error regarding Cosmos wiring diagram. The dots represent a common polarity. Has anyone tried the experiment?

Respectfully,

Core

Today was one of those days when everything went wrong at work. Hoping to get home 4 hours early to build some coils. Didn't happen.

Read the above translated text. One word came to mind 'eyeopening'.

Found the below picture on another forum. The writing on the picture is not mine.

Any comments?
.
.
.
.
.
BTW - Thank you Wesley.


Respectfully,

Core

I found about this coil for about 3 months ago.
As my history with OU is not long I was concentrating myself on analyzing dependencies
And because I was lucky enough  to be allowed to talk to Wladimir Utkin personally face to face
I was able to move a lot further.

As you see there are no new videos from my lab.
The reason for it is Shockac and other critics.
Although I respect the man and I believe he contributes to the forum a lot of value
I was unfortunate to get in conflict with him.
My impression was that he wants to be the new Tesla (-Tesla was his landsmen)
And I do not push to be first who made it in USA I just want to understand at first.
Understand to every bit of it.
Wladimir Utkin is very independent man he does not have lab but he has a brain
So I have lab and I can ask his brain for help
Till today I did mostly concentrate on equipment and LAB setup( much over 100 of apparatus so far)
and proper materials :
I'm waiting for "humongous"ferrite based  structure to be
delivered within  few days.

I assume that only 10% of my time I was able to spend  in re sarge experimenting in my lab.
And that 10% was  very successful.


In march of 2010 I had almost no  equipment so when I accidentally burned 150W bulb
with 2,75W delivered
-I immediately  started to acquire  around 1-3 instruments a day

I'm waiting for 10 devices (plus  55kg Fluke  5205A PRECISION POWER AMPLIFIER/ CALIBRATER!)
The scientific  investigation should start to speed-up  1 month from now.
Learning each individual instrument takes time a lot of time.

Wesley
PS: I Flip-Flap(from traditional science to opposite of one- only  From February of 2010)
So I'm "crazy" for not  too long.
Give me some  of time and I will deliver!!!
Do not "bite me " in the meantime

The reason for it is Shockac and other critics.

I hope you don't consider me a critic, Wesley. We disagree about a few things, and I enjoy the debates, but I am sure we agree about far more than we disagree. I look forward to your findings.

Does anybody have all the pdf`s of these Utkin secrets .

All of them, this one I never even seen before .

Cosmo, i am always in a mood for an easy experiment. So for the electromagnetic winding i can use a 12 transformer, restrained by a bulb so only 2-3 amps flow the winding. (anyway the magnetic effect is there on core)

What about the suitability of the HV source. Any comment to assure success?

i make video for you of this experiment - because there as i see all guesses are wrong, too complicated - but all thing and concept are much simpler.