Author Topic: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze (Read 16607488 times)

sadang · « **Reply #7845 on:** October 20, 2011, 05:05:41 PM »

Hi all. Wesley, I also want to help TK. Let's find a way to send him money. According to a popular word in my country: "No one is prophet in his country!"

Ganzha · « **Reply #7846 on:** October 20, 2011, 05:36:54 PM »

WEsley! Thanks for a video!

e2matrix · « **Reply #7847 on:** October 20, 2011, 07:05:58 PM »

Quote from: xenomorphlabs on October 20, 2011, 02:03:09 PM

So that is reason enough for you to turn ad-hominem and restrict freedom of speech?
Doctor, where is the "foolishness" in simply quoting from a wikipedia article
that clearly states that the reagent can have a toxic effect?
Most medicine has side-effects.
http://en.wikipedia.org/wiki/Calcium_hypochlorite

@TheCell:

You are right, i wondered about the uneven number of pnp and npn transistors too. The circuit does not work as expected in the simulator:

OFF TOPIC - xenomorphlabs, There was a battle going on with wikipedia between Jim Humble of MMS and the PTB. Humble and friends kept posting the true info on Wikipedia only to have it rebutted and edited out. It went back and forth for some time and then one day Humble found the info could no longer be edited - it had been locked by wikipedia admin so they were either paid off or threatened. 'The truth is out there' but in this case it's not at wikipedia. It's true the calcium hypochlorite can be dangerous if you consume too much or without enough water but taken as directed it's probably a lot safer than taking too much of any prescription drug. In fact most prescription drugs have so many bad side effects that you end up with a new problem just from taking them.

e2matrix · « **Reply #7848 on:** October 20, 2011, 07:15:39 PM »

Just a note concerning the Caduceus coil. When you get yours built it may be a good idea to provide good shielding around the unit and watch where you point it. Keep it away from people and sensitive electronics. I've heard many accounts over the years of their effects. Check this 1.5 minute video of the effects and a Caduceus coil! Amazing.
http://www.youtube.com/watch?v=d2zU_aB8V6Y&feature=player_embedded

xenomorphlabs · « **Reply #7849 on:** October 20, 2011, 08:10:22 PM »

Quote from: e2matrix on October 20, 2011, 07:15:39 PM

Just a note concerning the Caduceus coil. When you get yours built it may be a good idea to provide good shielding around the unit and watch where you point it. Keep it away from people and sensitive electronics. I've heard many accounts over the years of their effects. Check this 1.5 minute video of the effects and a Caduceus coil! Amazing.
http://www.youtube.com/watch?v=d2zU_aB8V6Y&feature=player_embedded

It's basically a good idea also in regards to avoid pissing your neighbours off.
Think about it tomorrow your 20 year old neighbour will knock on your door
and complain about the evil hell waves that turned him into a grandpa overnight.

Shielding it could turn out to be quite an act according to Naudin:
http://jnaudin.free.fr/spgen/spg_shield.htm

The video link does allow only the observation that the clock mechanism
moves faster. The actual cause for that can be EM effects on the mechanism.
If he'd used a sand-clock it would have been more convincing.
Maybe this experiment can be repeated by T-1000 or Stivep?
I'd trust them more than a pseudo-scientist who deals with "time-travel" ,"Astral Hell" and "Predictions of the future" ...

gyulasun · « **Reply #7850 on:** October 20, 2011, 08:13:04 PM »

Hi e2matrix,

Would like to tell you that every wrist-watch service shop have got a low frequency oscillator that drives a coil, this coil can be any kind, mainly with soft iron core, many watch service men use a simple open core transformer driven from the 50 or 60 Hz mains (with current limit). The purpose of this low frequency drive is to check the inside mechanical clock work and blow any dust away with compressed air while the wheels turn faster than 1 Hz.
Some years ago I personally witnessed such speedy turning by a normal (solenoid) coil, used by a service man in his watch repair shop.

I do NOT want to speak against the properties of a Caduceus coil, nor against the Hyper Dimensional Resonator shown in the video. ANY pulsed oscillator with especially open core coils can AFFECT sensitive electronics due to its near-field radiation. I just wanted to clarify the effect shown in the video can be produced with "normal" coils/oscillators, this should not be connected to a special property of the Caduceus coil type.

Thanks, Gyula

From other Planet · « **Reply #7851 on:** October 21, 2011, 12:04:54 AM »

@stivep, T1000 and team:
Thank you very much for the great work and sharing ur results with people, hope it will make world little bit better place to live for all!!!
I have some questions:
- How you measure input of 5W(?) into device, you are 100% sure its not more? (don't want to doubt functionality of device!) I'm asking cause many know meters can lie, especially when hv and high frequencies is involved
- The HV diodes, would it be possible to put like 80 1kV 1 A in series, as this seems to be the cheapest solution? (Saw them u use on ebay and there price was about like 40â‚¬=~50$ for one)
- What is min/nominal voltage of the spark gaps?

PS: I have not much money, but also would donate some Dollars/Euros for TK, guess almost everyone here will do

xenomorphlabs · « **Reply #7852 on:** October 21, 2011, 12:39:04 AM »

@T-1000 : Got another question concerning the power supply in your circuit.
From the looks of the isolation transformer secondary you have a winding center-tapped with a distribution of 8:80 Volt.
That would create an enormous DC offset for the transistor stage and the following flyback with no decoupling caps used. Is that intentional? Seems to be made special note of in the schematic.
Normally people try to avoid such DC across their transformers. You do that to saturate the transformer core deliberately?

In the case that the isolation transformer puts out 8V and 80V instead of 220 Volt then your power consumption would be less than 5 Watts if the optimal current is 0.025 A as mentioned in the schematic.
So can your confirm what voltage you use to supply to the driver stage?
Thank you.

T-1000 · « **Reply #7853 on:** October 21, 2011, 02:11:11 AM »

Regarding electronic watch over caduceus coil - nothing magical, the main element in electronic watch is quartz crystal for 1Hz frequency(pjezoeffect) and seems it affected and is a caused illusion of "time warp"...

Regarding power input - the input is not able to handle 150W load and would burn out.

Regarding question about TT winding center-tapped with a distribution of 8:80 Volt - in Tesla coil you expect to see even less windings on primary and it is not conventional electrical step up transformer. It is almost electrostatic machine with ion flow instead of electron flow in secondary coil.

electricme · « **Reply #7854 on:** October 21, 2011, 03:07:39 AM »

@T-1000

Just want to thank you for making the circuit and posting it, however, is there any chance you might alter the colours of the background from black to white? and make the wires black.

I managed to print it, but the whole page was black, me being an invalid pensioner, I need to concerve ink here.

I also tried to open it using Foxit Reader, but it said format error: not a PDF or corrupted. Any chance of making the pdf to be read from Foxir reader?

Measuring high voltages
As an above poster has mentioned previously, this device can make life unpleseant if you accidently contact a high voltage part.
I don't usually post recomending this or that but this is an instrument (very cheap) that everyone here could use to fault find the high voltage sections on the Kapanadze Device.
There is a High Voltage probe that has been made by Silicon Chip magazine in Australia, it is called EHT Probe, it appeared in the Aptil 2010 issue, you can take a look at it here http://www.siliconchip.com.au

It basically is a single strip of PCB, with 80 X 10Mohm 0.5 watt resistors in series, and a 25 turn trimpot to calabrate it spaced apart for safety.
The output plugs into the DMM via banana plugs.

This can be bought from Altronics (Perth is the head office) in Australia in Kit form.

jim

electricme · « **Reply #7855 on:** October 21, 2011, 03:33:04 AM »

EHT Probe

Kit Number K2559
Currently it is going for $45 Australian
Try here to go to the web site http://www.altronics.com.au/index.asp?area=prod&grp=429&pg=0&list=2&sort=alpha
For those who need the direct link, take a look here http://www.altronics.com.au/index.asp?area=item&id=K2559

jim

dllabarre · « **Reply #7856 on:** October 21, 2011, 05:12:29 AM »

@T-1000 & Stivep

Tariel's Green Box unit has the load (bulbs) connected to the ground wire and the ground wire showed 22amps.

I'm curious as to why is it that you don't need to connect the ground wire to the load?
What is different? I want to understand everything about this device of yours.

Thank you for any explanation
DonL

forest · « **Reply #7857 on:** October 21, 2011, 09:34:34 AM »

Quote from: dllabarre on October 21, 2011, 05:12:29 AM

@T-1000 & Stivep

Tariel's Green Box unit has the load (bulbs) connected to the ground wire and the ground wire showed 22amps.

I'm curious as to why is it that you don't need to connect the ground wire to the load?
What is different? I want to understand everything about this device of yours.

Thank you for any explanation
DonL

In green box video I believe once gound was changed to buried radiator only one bulb was lighted.Would be interesting to see how this new circuit behave with two bulbs in series or parallel at output and with/without ground connection.

energia9 · « **Reply #7858 on:** October 21, 2011, 01:38:43 PM »

i have some questions about the spark gap tube again, because i have seen they either contain mercury with some nobel gas, or they are radioactive, i found spark gap tubes on ebay and their pure source of gamma rays was 11 mR/h. it contains 226 Radium,
we are sure that the device do not require a spark gap tube to operate?
Thank you.

AbbaRue · « **Reply #7859 on:** October 21, 2011, 01:49:35 PM »

This site sells 1000V 6A diodes for 30 cents each and if you buy 100 they go down to 25 cents each
http://www.futurlec.com/DiodesPower.shtml#6ASeries
All placed in series that;s 100kV for 25 dollars.
Or $6.25 for 25kV.

News:

User Menu

Author Topic: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze (Read 16607488 times)

sadang

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

Ganzha

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

e2matrix

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

e2matrix

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

xenomorphlabs

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

gyulasun

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

From other Planet

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

xenomorphlabs

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

T-1000

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

electricme

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

electricme

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

dllabarre

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

forest

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

energia9

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

AbbaRue

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze