Sir
we have much diversity here [language /countries] and even amongst persons of the same language
there are terms and phrases which can get the "hair up" ..
The term taking a piss [UK slang for Joking around} had me sharpening the knives for a fellow ....

and he meant no harm at all ,I just misunderstood .


Just one mans opinion.

respectfully
Chet K

http://dictionary.cambridge.org/dictionary/english/take-the-piss-out-of-sb-or-sth

As a man born and raised in the UK, I consider that slang term to be derogatory and out of place on any public forum, thus deserving complaint from the recipient.

Just another man's opinion.

Hi I have just come in to this, I don't understand Hoppy runs down 'device builders' down and makes a big noise about Geo suggesting incompetence and then gets upset about a 'specsavers' advert.  an attack defense line ?

Lets grow up and converse like learned grown ups ?

Also who is Void look it up it means run everything down and be disruptive !!!

Can we get back to FE now please

There are many builders here that just follow their own path. Totally fine with that.

There are some people here that I feel are just trying to disrupt any development or new ideas. Totally fine with that too.

Even I did post all kinds of questions on this Dally thread just because I thought it was a general thread and the only one with any activity.

I think this kinda of research is way too important to be stopped by any kinda of small-mindedness. So if you have input on the Dally replication speak here. If you want to post your summer holiday pictures please do it on another thread. If AG writes something you don't like, just don't read his posts!

Everybody is not going to be friends with everybody, so just accept that and move on. I think people trying to find "perpetual motion" need thicker skin.

Void,

like Hoppy, i am interested into your findings, so i hope you will find the time and stamina to publish them either here or in an new thread
so we could do a replication and compare data.


Thanks,   regards Itsu

Hi all 

has been a while since I posted something here...

hope all is well with all, forum seems busy and saw some progress on NickZ's side, happy to see and hear that you
got to experience the effect for a moment, hope that you can get it back and to fix the heating issues .
Btw, you can only get that effect happening when both are on,cannot be done with only the TL494 board, you will need
both kacher/Tesla coil for this and some how shown this,even you did .

Thinking everyone saw the uploaded vids already. Happy to be back on the bench.
Life brings surprises when you least expect it but back on the path and exciting journey.

Having the Akula Kacher ( interrupter)  working now brings more control
over the pulses and is already in sync with the TL494 pushpull board.
There will also be a add up board right after the TL494 pushpull board connecting and to control the Fets individually duty's and delay there is now so much to test again with the latest info I got and also thanks to T-1000 helping out.
On bench on last video even without having the  grenade connected we had effect, it's interacting with the active coils on the yoke/toroid.
on the scope it's interesting to see what it does, the very next videos will have also scope readings.

about the amp-meter, I know many are not so sure about the readings
but it's working as how we know it should,it is really showing what it's drawing
no problem, will try to connect a 0-2 amp-meter so we have a closer look at mili-amps scale when in operation.

Keep on experimenting guyz, don't give up.

 Quick prev. of a screen print on scoping on the base of the Akula Kacher below

   Cheerz~

Hi everyone,

Although i am no longer involved in kapanadze replication attempts.

But i need to give closure even though it is considered extremely hard information to swallow for many.

Some of you may recall i was using parametric oscillator using LM393N connected to 2 hex inverter then to my divide by 3 counter as previously released in my youtube channel.
The divide by 3 output was was fed to the single to dual channel splitter IRXXXX powered by 12volts then fed to dual channel mosfet driver.
The full details on i achieve around 80khz sine wave at output.L/C from toroid resonance is around 30khz but this is divided by 3 so it's running at 10khz.
But once the kapanadze coil(interrupted oleg circuit hybrid which was posted by me) hit the right frequency within 20khz around 1.7Mhz.The output of kapanadze coil would be producing around 80khz sine wave.

Mosfet driven at 10khz but kapanadze coil is running at 80khz.Sine wave of higher voltage.

But the sad part is i observed no OU maybe i am living in high rise or i have wound the coil wrongly maybe too few/many turns.Only 2 missing possibilities.

--------------------------------------------------------------------------
From this experiment there was a unexpected or maybe unrelated incident which i may release for my 100th video maybe.

I have somehow managed to generate orange plasma which i nicked "Firefly" from the output of mosfet driver even though it was connected to my SIC mosfet.

Have anyone in this world generated "tiny orange plasma" with no smoke from output of mosfet driver(1.7Mhz interrupted) powered at low voltage 20volts with no increase in current.

(But i can't assume it's the same hydrogen plasma as mentioned by Akula in his old deleted video with translated pdf documents.)
The soldering flux underneath mosfet driver created approx 431kohms between output and ground before it was cleaned off.
This in theory can be replicated in tap or salt water if 2 metallic points is close together.

----------------------
Good Luck with nothing much to reveal from my end.

   Geofusion
   Welcome back, we've missed you around here.


   After watching your first new video, I decided to disconnect the 3t and the 168t grenade coils. And I found that I could produce the same RM (Radio Moscow) signal sound as with the grenade connected up. Sort of surprised me at bit, as I've not seen that happen before.


   I'm still struggling with the snubber heating issue, no matter what I do. Can you tell me what snubber caps and resistor you are using for your set up? The snubber caps and resistors?
   Can you also let us know what voltages you get between the fet's drain and source. Please.
                                                                                                            Thanks,
                                                                                                                        NickZ