just found this thread..anyone building or built one..where do i get the schematic/build info?

aaron

the DC input in circiut is coming from this picture
it will be monitored by software and Duty cycle will be changed to adjust the load and voltage

aaron i have a vision world needs a new concept we need to develop devices that can handle magnetic flux just like we have capacitor, inductors, diodes , transistors to handle electric current we need to develop the devices to handle the flux this will be new concept and will perform better then what we have now

i will develop first magneto-cell, a cell that will generate electric power just like a magnet generate flux.

vision is the first step towards destination.

It looks like Steorn has been a few steps ahead of Gotoluc:
http://www.youtube.com/watch?v=S5nae_I_Mus

with toroidal coil they using vector potential effect?

aaron

the DC input in circiut is coming from this picture
it will be monitored by software and Duty cycle will be changed to adjust the load and voltage

aaron i have a vision world needs a new concept we need to develop devices that can handle magnetic flux just like we have capacitor, inductors, diodes , transistors to handle electric current we need to develop the devices to handle the flux this will be new concept and will perform better then what we have now

i will develop first magneto-cell, a cell that will generate electric power just like a magnet generate flux.

vision is the first step towards destination.

Many thanks WinsonAli,
I await for your e-mail reply to the questions, and many thanks for the connection schematics for the coils.
I know this is a mechanical solution and you have a far more superior one which is solid states. But I am satisfied even with a mechanical solution humbly, because when one does not have anything, anything that can meet the needs in a less refine manner can be accepted with gratitud.
I wonder where I can send you the money for the programmed IC?
Anyway, a thousand thanks for the help.
Second thing: if I need to build more than one generator, for my friends, should I purchase more programmed ICs from you?
Regards,
Aaron

winsonali

Dream,vision, reality


Chet

aaron:
i have dispatched the IC to your given address
enjoy

EMDevices:

i am fully agreed with your explanation regarding lens force

regardless of formula and description of lens force here is the reason of so called lens force

when a rotor moves in a static PM the first force encounters is the force of attraction between magnet and core material regardless of polarity .... this can be reduce by properly balancing the mechanical margins equally in 360 degree but cannot be fully finished .... they are just like invisible brakes.

when you move rotor mechanically to produce electric power the winding in the rotor starts getting voltage due to changing field now this makes the rotor a polarized electro magnet.....
each time the direction of the magnet aligned as the facing pole's inverted pole direction another greater force of attraction become active(this is lens force)  ....now you need move power( against lens force)  to keep it moving to achieve required voltage without load.

One new phenomena takes place when we connect load to generating rotor coils. the coils starts flowing current and become more heavily magnetized...we need more force to maintain the RPM to get proper voltage at consuming  current.....( i see this as increasing duty cycle in electronics)

the above description is mechanical force ... same are present in electrical as well

the KEY to understand

this is with my own experiments i called this effect "MDFGR" mutual dynamic field gate resistance if we control this effect we can simply convert the magnetic field in electric field.

what this effect is when magnetic lines passing through a current carrying conductor which is not magnetically permeable this effect force the material to to aligned atomic poles in the direction of external field flow as a result this changes the structure and gates of electronic arrangements and due to this reason the resistance of the material dynamically reduces and it starts consuming more and more current.
 

this phenomena is applicable to those materials which are good electrical conductor but poor magnetic conductor.
i have recently developed the formulation of an FE3o4 based alloy with some coating that wire will give you the same effect as core based coils but there will be no core required so we have reduced the greater mechanical force hindrance without lossing the efficiency

a lot of technical work is present with me and results of technical works are registered with backup videos.
   
the circular disk magnets facing each other can produce more power then conventional generators. there is a key don't get the power until and unless it is at the peak and stop taking the power instantly once you fill the power bucket. as i have done in genie.

Em devices :

i really want to share the new device with you which is self running now  just waiting for right time...   

all the easy possible power generation methods are already in use with there efficiency what ever method will come up now will be out of the box and not in the existing lines.

for me a solid state generator is more preferable so i am concentrating on them rather then mechanical solution  but i have studied all mechanical power generation techniques very well.