Author Topic: New invention of motion less generation of electric power (Read 350993 times)

jan.kolar · « **Reply #480 on:** November 30, 2009, 11:48:22 AM »

Quote from: onthecuttingedge2005 on November 30, 2009, 09:01:39 AM

I remember a lecture done on Tesla strength almost two decades ago, they said that at or above 13T some forms of matter began to act like liquids instead of solids. but 13T was the beginning of that magical tesla number.

I have never seen that phenomonom directly because I have never had access to a Super Electromagnet of that strength. I have heard that we can acheive up to 900T pulsed for less than a second but the device destroys itself in that brief moment like it was a box of dynomite. nobody at all is allowed to be in the room when they charge it up or they would die.

In magnetic resonance imaging field strength used is commonly 1 - 2 T. Negative effects on human body are not recognized but attention must be held to remove all iron things apart because in field of this enormous strenth they would be accelerated like bullet from rifle. Of course another situation is with alternating magnetic fields.

onthecuttingedge2005 · « **Reply #481 on:** November 30, 2009, 07:58:18 PM »

Quote from: jan.kolar on November 30, 2009, 11:48:22 AM

In magnetic resonance imaging field strength used is commonly 1 - 2 T. Negative effects on human body are not recognized but attention must be held to remove all iron things apart because in field of this enormous strength they would be accelerated like bullet from rifle. Of course another situation is with alternating magnetic fields.

at 13T and above I think that unlike Iron even Pepto Bismal in the body would be a deadly interaction with such a field strength.

at around 100T it wouldn't matter because every element in your body would be influenced terminally. Paramagnetic, Diamagnetic, Ferromagnetic, ferrimagnetic, Anti-ferromagnetic, and so on would be highly effected.

winsonali · « **Reply #482 on:** December 01, 2009, 01:53:15 AM »

my latest experiment is very successful
only thing left is power regulation
because their is only one coil that is the secondary coil is present in the system so it will get the maximum power now either i have to create different tappings or some other digital format like change in duty cycle to control output power

Nihilanth · « **Reply #483 on:** December 01, 2009, 02:12:16 AM »

Congratulations on your success!

winsonali · « **Reply #484 on:** December 01, 2009, 03:13:03 AM »

Finally, over half a century after Einstein made his contributions of general and special relativity, Myron Evans, following in the tradition of Einstein, accomplished the impossible.
Instead of trying to quantify gravity in terms of discrete packets of energy (quanta) to make it comply with the standard model, Evans took the opposite approach, He succeeded in describing the standard model in terms of geometry. In the Evans Grand Unified Field Theory (now called Einstein Cartan Evans (ECE) Theory - MWE), particle exchange is not the fundamental unifying factor. Instead, for each force there is a specific curvature of spacetime or spacetime geometry. The resulting equations can be applied to any area of science and engineering. The impact on the computer, transportation, medical, power, and manufacturing industries will ultimately be as profound as the discovery of fire."

winsonali · « **Reply #485 on:** December 01, 2009, 03:20:50 AM »

"As a result of the theory by Evans, an axial magnetic field component B(3) will exist in the direction of propagation of an individual photon. Regarding such a photon as an axisymmetric wave packet of limited transverse section, it is inevitable that the packet should possess a three-dimensional magnetic field pattern, having an axial field component B(3) and an associated angular momentum (spin). This fundamental contribution by Evans leads to a better understanding of the enigma of the photon than can be offered by conventional theory. Accordingly the results by Evans have inspired a number of scientists and research groups to perform further investigations along this line of approach. The research by Evans is thus of great importance to the scientific community and to the further development of modern physics and chemistry."

When well connected scholars put forward something they receive awards
when we say something we are asked for proof practical demonstration....
at our own cost

winsonali · « **Reply #486 on:** December 04, 2009, 01:12:44 AM »

new effects occurring with the increase in load the power passage of vacuum tube shrink
now a new problem to solve

FatBird · « **Reply #487 on:** December 04, 2009, 02:03:43 AM »

Ali, Please give more details & a diagram so we can offer some ideas & suggestions.

.

winsonali · « **Reply #488 on:** December 04, 2009, 05:17:15 AM »

fatbird:
thanks i will send you some scope shoots and related graph

but i figure it out as the current increases on load beam of wave reduces in size and moves to ward the center i think is due to magnetic field generation due to secondary coil
even then the power is good up to 700 watts may be this will define its limit
so for more power we need to add move tubes.

gravityblock · « **Reply #489 on:** December 04, 2009, 07:20:02 AM »

This video fascinates me, http://www.youtube.com/watch?v=FrGtPKBXkVQ

It's as if there are two streams of energy flow that separate when a magnet is present and re-combines when the magnet is removed. Where the energy streams enter and exit the tube, you can still see the two different streams separated. Anyone else see this?

GB

forest · « **Reply #490 on:** December 04, 2009, 12:13:18 PM »

Indeed. I speculate that electric current is composed of two components which are the same as for permanent magnet, flowing in opposite directions. Well,something like that afaik Ed Leedscalnin described in 1945.

winsonali · « **Reply #491 on:** December 04, 2009, 07:32:19 PM »

Gravity block:

in my case the situation is inverse may be coz i am using high frequency modulation for the purpose of
flow of current from active mode to passive mode and then on particular time change the direction of flow by changing ground reference in other wards swap the ground and live so we get the change of direction

the new formula i have figure out is current I is directly proportional to frequency f(swap) where as the base frequency remains same.

just think you have high frequency all the time but you change its ground reference with 50 hz
so base frequency used for transfer of energy from active mode to passive mode remains same and its direction is changing only
analogy: means in other words you have magnetic field changing its direction all the time and according to Faraday's law rate of change of flux is directly proportional to voltage same effect is taking place but the main component is changed from voltage to current.

i am driving the new equation to satisfy this situation and i think a swamping frequency of 6 HZ is enough to produce require voltages when there is no load but when you increase the load you need to increase the swapping frequency to keep the same level of voltage

i believe leading in this experiment is the clue of how to convert active energy from dead energy of magnet.

winsonali · « **Reply #492 on:** December 04, 2009, 08:06:16 PM »

i think i Got the key why other MEG's didn't work although they have flux and its varying in magnitude but if its not generating any advantage of that flux is due to the invisible factor that is taking place
it requires to setup new directions for electric power generation.
we are getting very close.

forest · « **Reply #493 on:** December 04, 2009, 08:12:38 PM »

Quote from: winsonali on December 04, 2009, 08:06:16 PM

i think i Got the key why other MEG's didn't work although they have flux and its varying in magnitude but if its not generating any advantage of that flux is due to the invisible factor that is taking place
it requires to setup new directions for electric power generation.
we are getting very close.

is that flux which you modulate , oscillating like AC or unipolar like DC ? one polarity only or both ?

winsonali · « **Reply #494 on:** December 04, 2009, 08:32:02 PM »

forest:
very good question using signal processing technique i have generated AC frequency surmounted with on DC so it has its base in positive direction so we have both components in the signal and surely it goes to ground and when you are changing grounds means you are changing the flux direction.
this experiment have given me new light its wonderful and this has answered various question.
especially
what is mutual inductance
why since years permanent magnets used in transformers could not play a positive role.
why other MEG setups failed.

The key is every body use fixed frequency or change duty cycle to get the power output
but the formula is if you have fixed flux in your system you have to change the frequency to get the adjustment of loads.

i am happy happy.

News:

User Menu

Author Topic: New invention of motion less generation of electric power (Read 350993 times)

jan.kolar

Re: New invention of motion less generation of electric power

onthecuttingedge2005

Re: New invention of motion less generation of electric power

winsonali

Re: New invention of motion less generation of electric power

Nihilanth

Re: New invention of motion less generation of electric power

winsonali

Re: New invention of motion less generation of electric power

winsonali

Re: New invention of motion less generation of electric power

winsonali

Re: New invention of motion less generation of electric power

FatBird

Re: New invention of motion less generation of electric power

winsonali

Re: New invention of motion less generation of electric power

gravityblock

Re: New invention of motion less generation of electric power

forest

Re: New invention of motion less generation of electric power

winsonali

Re: New invention of motion less generation of electric power

winsonali

Re: New invention of motion less generation of electric power

forest

Re: New invention of motion less generation of electric power

winsonali

Re: New invention of motion less generation of electric power