Hey look, I found an Aether vortex on this piece of metal!  Oh, perhaps its a camera artifact eh?

Winsonali,

Great to see you made some progress.
As for your Genie I can image the use of it in many industrial applications.
Companies are all ways looking to save energy consumption on their equipment and it can be the deciding factor to get the contract over their competitors.

Currently there are companies who are selling energy saving capacitor like devices to factories and even to homeowners.

Sound like you have a great product. You should do very well.
Stay focus.   

Cheers
Howard

Majority of companies selling energy saving capacitors are scammers. In some special cases capacitors can save a few percent of bill but this has nothing to do with overunity. All can be understand using standard theory of electricity. By reducing reactive power you are bringing down line losses in your house. You are mixing 2 different things. More information on http://en.allexperts.com/q/Electrical-Engineering-1356/2009/1/Energy-saving-capacitor.htm

I would like an OU camera too but the below is real.
You can have the same effect by shooting your car headlights, if they are the newer 'near UV' lights.

Google 'MTF' (Modulation Transfer Function). This is basically the inability of the CCD cell to perform its job of averaging pixel color. This can happen because the area color is changing rapidly (almost square-wave) or the light spectrum for the pixel is approaching the upper limits of the CCD camera.

.... It does tell me this device is probably applying a very high frequency to the bulb. Perhaps only as 50Hz modulation of a very high frequency carrier but their is high frequency there.
....

@winsonali

In one of your previous posts you said "comparator" and that made me think about a device I used to sell in the 80's called an Electronic Power Factor Controller. We had models able to control up to 200hp motors. The device basically senses the load on a motor and provides only the power required to run the load requirement by cutting out a portion of the sinewave. The three patents on this is located here and may give you some ideas on how to better use Triacs. The NASA folder holds the original patent that was then licensed to manufactures at the time, but I seem to see know it is completely forgotten. I should have held on to my last units.

http://purco.qc.ca/ftp/Companies/Cynex%20Manufacturing%20Corporation/

no its for comparison and paper writing about the device and its efficiency over different form of energy conversions techniques

during my recent working i have established this fact

a magnet either permanent or electro has nothing to do with electricity generation its just a property of materials to attract like materials and the reason is polarization this means it has fixed exit and entry points .

the mechanical analogy is, if you have cup of tea and you want to mix sugar in it, now you will use a spoon if you just put the spoon in the tea it will not do any thing, to mix the sugar you need to stir spoon this means you have transfered the ME energy in system
like wise a magnet can not induce current in a coil just by keeping it near to the coil, it will transfer ME energy in coil when you move the magnet this means ME is transfered in electricity and the media used for transfer of energy is magnet.
 

magnets work as carrier of energy waves from ME to EE also, EE to EE ( open loop transformers, charges travelling in vacuum )  mean while if we intercept these waves and modulate them on another field you will get added energy of magnetic property.
the important thing is charges travelling should posses less energy then intercepting field force in vacuum.

mechanically this is not easily possible because you need 120,0000 RPM for proper modulation but thanks to modern power electronics we can simulate this in electronics 

 
   

yes shortly
in my last post i have given a clue how i am doing electricity generation

during my recent working i have established this fact

a magnet either permanent or electro has nothing to do with electricity generation its just a property of materials to attract like materials and the reason is polarization this means it has fixed exit and entry points .

the mechanical analogy is, if you have cup of tea and you want to mix sugar in it, now you will use a spoon if you just put the spoon in the tea it will not do any thing, to mix the sugar you need to stir spoon this means you have transfered the ME energy in system
like wise a magnet can not induce current in a coil just by keeping it near to the coil, it will transfer ME energy in coil when you move the magnet this means ME is transfered in electricity and the media used for transfer of energy is magnet.
 

magnets work as carrier of energy waves from ME to EE also, EE to EE ( open loop transformers, charges travelling in vacuum )  mean while if we intercept these waves and modulate them on another field you will get added energy of magnetic property.
the important thing is charges travelling should posses less energy then intercepting field force in vacuum.

mechanically this is not easily possible because you need 120,0000 RPM for proper modulation but thanks to modern power electronics we can simulate this in electronics 

What kind of vacuum are you actually using?
Vacuum tubes? Can you mention a type number?

Your cryptic description reminds me also of light travelling at different speeds in air, glass, water....