Author Topic: New invention of motion less generation of electric power (Read 350903 times)

jan.kolar · « **Reply #285 on:** October 16, 2009, 05:42:11 PM »

There is very good explanation of mechanical siphon on wikipedia (http://en.wikipedia.org/wiki/Siphon). Nothing mysterious here, energy conservation law is perfectly valid. Here is short extract from article mentioned:
"The velocity of the siphon is thus driven solely by the height difference between the surface of the upper reservoir and the drain point. The height of the intermediate high point, hB, does not affect the velocity of the siphon."
Its strange that Ali is so emphasizing analogy with mechanical systems:
"mechanical example of situation: you have bath tub full of water the top is open water cannot flow
out from top if you make a whole in bottom of the tub it will flow (natural) now i have to make
water flow from top. if i can do the same in electronic means what i have achieved is creating PD
with non aligned electrons." (September 1, 2009, 7:23 AM)

"we need to think out off box , if you can explain electricity mechanically you can treat it like that" (September 11, 2009, 4:25 PM)

I dont know about mechanical perpetuum mobile or overunity device based on siphon effect. If Ali's analogy is valid then no problem for him to build also mechanical device with closed loop running indefinitely.

jan.kolar · « **Reply #286 on:** October 16, 2009, 06:35:41 PM »

Quote from: allcanadian on October 16, 2009, 05:37:21 PM

@jankolarMost often the difference between the possible and impossible amounts to nothing more than knowledge and understanding. Inductance acts like the mass on a pendulum displaying the property of momentum. Do a little experiment for me and yourself. Attach a mass(inductance) in between two springs(capacitance) or elastic bands then attach one end of this apparatus to a wall or doorknob. Now, hold the other end of the spring and start pulling and releasing the spring so that your pull/release is in time with the motion of the mass, this is resonance---note the frequency of your pull/release. Now double the weight of the mass and try it again, you will find the frequency has changed. In order to keep the frequency at it's original value of the smaller mass you will have to pull harder and faster on the larger mass---extra work. The power grid in North America is locked at 60Hz so you cannot change the frequency, when inductive loads are attached that are not resonant at 60Hz extra work(current) is required just like in our little experiment. Instead of doing extra work you can change the stiffness of your springs(capacitance) to compensate for a changing mass(inductance), the resonant frequency of the load can then be matched to that of the source (resonance), this is PF of 1. The reason few people utilize PF correction equipment is because it involves high power/high speed electronics usually, this is very expensive. The fact of the matter is most people are ignorant to the facts or they just don't give a damn, ask your self why almost nobody here understands what PF is or how it works? I have one simple rule----- If I don't understand something--anything, I research and experiment until I do. Very simple concept.
Regards
AC

You have quite a good vision of what PF is. You are right that more power is needed if electric circuit is not compensated. But this more power is almost immediately returned to grid. Its like short-term loan. This part of electric power is called reactive power and as I know it is not measured by conventional electric meters. Check this:

jan.kolar · « **Reply #287 on:** October 16, 2009, 06:51:40 PM »

To make it even simpler. You need some energy to charge a capacitor, but this energy is few miliseconds later returned to grid, when capacitor is discharged. So if you disconnect your simple circuit with only one (ideal) capacitor in right moment, you have not consumed any electricity. The similar reasoning is valid for inductor. This is reactive power. Capacitor has negative reactive power, inductance positive reactive power. Reactive power can be measured by special electric meters (var meters).
Real power represents the losses on resistors in circuit that are transformed to heat + mechanical power (if you have electric motor).

winsonali · « **Reply #288 on:** October 17, 2009, 01:12:21 PM »

hello everyone,

i am now settled in my new premises and now up and running once again
i will be posting new video showing use of digital watt meter/hour that can show us exactly the watt frequency and power factor

after limiting the input current and putting a digital watt meter hour on input and output has given a difference of 80 watts gain
input is 96watt what device is taking and out put is 176 watt going out from device
i will post the video shortly

results are good and i have got another project to do not related to alternative energy but very interesting jamming digital video reception producing water marks that are not visible with naked eyes but if a camera takes video or snap it will appear and will distort picture. this new project is a new jewel in my research carrier

thanks every body

teslaalset · « **Reply #289 on:** October 17, 2009, 03:37:20 PM »

Hi Ali, good to see you back in this forum!
Looking forward to see your 3rd video on power amplification.

The company I work for has done quite some research on your new project and obtained some essential results and patents. If you are interested in their technology just PM me, I can arrange some info on that.

To be honest it's quite hard to understand why you pay attention to new subjects while your power amplification project seems so important for the world.

jan.kolar · « **Reply #290 on:** October 17, 2009, 04:27:50 PM »

It would be good to know what is frequency range of wattmeter used. It maybe that circuit frequency exceed that wattmeter was designed for. Using LP filter could help.
Why had OU factor decreased from 3.4 to 1.8 (i am not saying this is not good result anyway)? Is this because of inverter losses? You also said (indirectly) in one of your previous posts that your invention do not contribute to entropy (September 3, 2009, 10:35 AM). Currently i know only one such device and this is heat pump (if i neglect energy needed for compressor). Is your device converting ambient heat to electricity?

spoondini · « **Reply #291 on:** October 17, 2009, 04:41:58 PM »

Welcome back Ali!

Looking forward to the next video - we are all incredibly curious as to how your device works.

neha9243 · « **Reply #292 on:** October 17, 2009, 04:51:10 PM »

welcome ali we all are waiting for your video

neha9243

FatBird · « **Reply #293 on:** October 22, 2009, 02:57:15 PM »

Dear Ali,

How soon are you going to claim the O/U Prize? We members are anxious to see your Open Disclosure unit. Please post soon.

Thank you.

.

winsonali · « **Reply #294 on:** November 03, 2009, 02:23:09 AM »

new video
http://www.youtube.com/watch?v=4sqmq9i-tos

i have added additional circuits to limit the current and changed in software the results are very different but i am working hard to complete the new unit just after new year as soon as my other project will be finished i get enough funds that i can put on this project

the next target is "self running unit" taking input 36 volts DC once operative batteries will be removed and it will run at its own
thank you for the support of everyone here

i don't mind what others say, but 2 units were installed one on electric heating unit 1000 watts and other one is on a refrigerator on both installation it is working and saving electric bill

the device is good as a transformer less voltage stabilizer with built-in energy saving capability.

But once again my target is self running Unit.
Thanks

FatBird · « **Reply #295 on:** November 03, 2009, 03:07:22 AM »

Ali, Great UTube Video.

Suggestion: Why don't you RELEASE your ORIGINAL FIRST UNIT now and CLAIM your $5,000 REWARD. There are several benefits:

1. Your $5,000 REWARD can help your research.
2. You will HELP THE WORLD by releasing your invention.

Thanks Ali,

.

hartiberlin · « **Reply #296 on:** November 03, 2009, 03:27:39 AM »

Dear Ali,
looks very good !

Do you power with the 140 Watts of input power also
the left dim light bulb and your Genie circuit?

Thanks that you turned the dimmer pot in the video, so
one could see, how the Genie responded to varying input voltage levels.

Why do you work on a different project, when this project is so important for the world
and the energy needs
and the other project will delay that so much ?

Why donÂ´t you publish the older design or at least
tell us, how the cap charge siphon effect is working ?

All will know, that you are the inventor and if they will
build their own power supplies based on this you will
probably get many donations from happy users..

Regards, Stefan.

EMdevices · « **Reply #297 on:** November 03, 2009, 04:19:46 AM »

thanks for the new video Ali, very nice.

What is the model number of your digital watt meters?

EM

WattBuilder · « **Reply #298 on:** November 03, 2009, 09:17:21 AM »

Great work Ali
Amazing!

Howard

homersimpson · « **Reply #299 on:** November 03, 2009, 02:06:04 PM »

Quote from: winsonali on November 03, 2009, 02:23:09 AM

new video
http://www.youtube.com/watch?v=4sqmq9i-tos

i have added additional circuits to limit the current and changed in software the results are very different but i am working hard to complete the new unit just after new year as soon as my other project will be finished i get enough funds that i can put on this project

the next target is "self running unit" taking input 36 volts DC once operative batteries will be removed and it will run at its own
thank you for the support of everyone here

i don't mind what others say, but 2 units were installed one on electric heating unit 1000 watts and other one is on a refrigerator on both installation it is working and saving electric bill

the device is good as a transformer less voltage stabilizer with built-in energy saving capability.

But once again my target is self running Unit.
Thanks

Hi,...

I saw your video, and I saw: input is 49Vx5.1A=250W - output is 244Vx0.78A=190W
Am I missing something?

Thanks.

News:

User Menu

Author Topic: New invention of motion less generation of electric power (Read 350903 times)

jan.kolar

Re: New invention of motion less generation of electric power

jan.kolar

Re: New invention of motion less generation of electric power

jan.kolar

Re: New invention of motion less generation of electric power

winsonali

Re: New invention of motion less generation of electric power

teslaalset

Re: New invention of motion less generation of electric power

jan.kolar

Re: New invention of motion less generation of electric power

spoondini

Re: New invention of motion less generation of electric power

neha9243

Re: New invention of motion less generation of electric power

FatBird

Re: New invention of motion less generation of electric power

winsonali

Re: New invention of motion less generation of electric power

FatBird

Re: New invention of motion less generation of electric power

hartiberlin

Re: New invention of motion less generation of electric power

EMdevices

Re: New invention of motion less generation of electric power

WattBuilder

Re: New invention of motion less generation of electric power

homersimpson

Re: New invention of motion less generation of electric power