Author Topic: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze (Read 16546589 times)

Mannix · « **Reply #7950 on:** October 24, 2011, 02:15:06 PM »

We might need to protect the signal generator

T-1000 · « **Reply #7951 on:** October 24, 2011, 02:17:46 PM »

Quote from: dllabarre on October 24, 2011, 04:58:40 AM

This is not good....

Wesley and T-1000 not being around to answer questions and supervise the direction of our replications.

Been a while away from Internet..

Regarding flyback driver circuit, you can take one from TV set like TK did. You only need to add LC part info flyback for better resonance frequency results. So input power lowers and output voltage increase to maximum with sinus wave on that frequency.

Regarding flyback with AV plug - it is good showcase where you start experiencing different type circuit and where you use capacitor as energy discharge source for creating electrical shockwave for TT. No battery/generator can give such explosive charge in time of microseconds.

Regarding discharger tube - the air pressure is not changed inside of it. Also no semiconductor can be used instead because it cannot wide spectrum you need for various resonant frequencies at once.

From this point it is your ways to play with circuit and share your experimental results with public domain. Most people wonder where power amplification come from and when you can show exact points with practical tests, hopefully the physics books will be filled with Tesla technology information for your kids to learn..

xenomorphlabs · « **Reply #7952 on:** October 24, 2011, 02:34:02 PM »

Quote from: dllabarre on October 24, 2011, 02:01:26 PM

Can you post a schematic and parts list of your signal driver?

Just so people can see and compare diff drivers.

Thanks
DonL

Before it is verified what the transistor stage output voltage across the flyback primary really is, this would be just guessing.
The power statement of 5 Watt and a drive current of 25mA (measured in series with the primary coil) suggest a 200 Volt
output voltage which i wouldn't know how to realize without additional components.
There is a certain chance that the current maybe was measured in series with the positive rail after the caps maybe. Just had the idea because an analogue ampmeter is shown in the picture which is mostly used to measure DC currents,
but can of course also be equipped with internal or external rectifiers to measure AC.

FreeEnergyInfo · « **Reply #7953 on:** October 24, 2011, 02:50:42 PM »

MORE NEW SHEM KAPANADZE..

http://freeenergylt.narod2.ru/tariel_kapanadze_secrecy/

From other Planet · « **Reply #7954 on:** October 24, 2011, 03:16:32 PM »

I would like to hear one more opinion, if putting 80 1kV 1A diodes (for example UF 4007, short switching times) in series to have cheap 80 kV Diode, is a good idea or not?
Also i am still very unsure about which spark gaps to use. Minimal/Nominal Voltage? Electrode Material?
The spark distance influence frequency spectrum produced by the spark?
Im working on a rotary spark gap for other projects, but dont know if i could use it in this setup.

Kind regards

forest · « **Reply #7955 on:** October 24, 2011, 03:20:02 PM »

Spark gap material does not matter if you have silent spark as Tariel had in his green box device.No heat , no sound, not deterioration on electrodes.

energia9 · « **Reply #7956 on:** October 24, 2011, 03:20:35 PM »

Quote from: FreeEnergyInfo on October 24, 2011, 02:50:42 PM

NEW SHEM KAPANADZE..

http://freeenergylt.narod2.ru/tariel_kapanadze_secrecy/

who drew those schematic?
everything starts to get very confusing,
he uses 50 hertz signal amplifies it up, sets resonance between primary and secondary,boosts up voltage, then further transmit it to a second transformer which brings down voltage ...

do tariel say resonance can be achieved at 50 hertz?
i know that when tesla speaks about longitudinal electricity he mentions using less than 20 khz so the losses in hertzian waves are smaller. and he mentiones frequency must be not less than what earth resonates at, which is 6-10hz

energia9 · « **Reply #7957 on:** October 24, 2011, 03:27:34 PM »

Quote from: From other Planet on October 24, 2011, 03:16:32 PM

I would like to hear one more opinion, if putting 80 1kV 1A diodes (for example UF 4007, short switching times) in series to have cheap 80 kV Diode, is a good idea or not?
Also i am still very unsure about which spark gaps to use. Minimal/Nominal Voltage? Electrode Material?
The spark distance influence frequency spectrum produced by the spark?
Im working on a rotary spark gap for other projects, but dont know if i could use it in this setup.

Kind regards

Use high voltage diodes, those from microvave oven will do it just fine they are rated for 12kilovolt and can handle big power.
attaching 80 diodes in series will give you high switching and other losses. which is not good

xenomorphlabs · « **Reply #7958 on:** October 24, 2011, 03:32:18 PM »

Quote from: energia9 on October 24, 2011, 03:20:35 PM

do tariel say resonance can be achieved at 50 hertz?

He indirectly said in his patent, that the secondary still contains a high frequency signal that will be converted to 50 Hz with a frequency adjuster.
Whether or not you give anything on that patent, the proposed circuit is a deviation from that.

Jury1 · « **Reply #7959 on:** October 24, 2011, 04:08:54 PM »

I was doing inverter on the Flyback Transformer and faced with an interesting effect.
This is not the avalanche breakdown. Transistor was cold. The base is completely disabled.
http://www.youtube.com/watch?v=sgJRs8ehC94

stivep · « **Reply #7960 on:** October 24, 2011, 04:28:46 PM »

Quote from: Jury1 on October 24, 2011, 04:08:54 PM

I was doing inverter on the Flyback Transformer and faced with an interesting effect.
This is not the avalanche breakdown. Transistor was cold. The base is completely disabled.
http://www.youtube.com/watch?v=sgJRs8ehC94

Thank you for video.
what is the black wire coiled on the right hand side that is coming from behind, down to the rear of the table?
Right hand side , bottom of the monitor?

Please post schematic of parts and connection.

Interesting but it would be nice to get more info
Can you show closer waveform ( shape of waveform)
what is the frequency of oscillation?
What is pick to pick voltage of oscillation?
What is multi meter - type ( model number)?
What is range of DC V switch to?
What is internal resistance of multi meter?
What is the model number of transistor?

Wesley

Everyone should contribute to the goal we need to achieve.Future of our life might be months or days away .
It will be avalanche in any aspect of it. We are the army that would benefit the most and at first.

Sorry for me not being here and thank you for your support . That what friends are for.
We are working on it.
Arunas T-1000 :I have not been in contact with him for few days.
But I speak to Aidas every day.

I have problem to get quick HV diodes 500ma 15000V
The sources are i China and 20-30 days of waiting.
Ebay does not offer anything fast unless you pay $50 per diode.

any suggestion for area of NY?

energia9 · « **Reply #7961 on:** October 24, 2011, 05:15:13 PM »

Quote from: stivep on October 24, 2011, 04:28:46 PM

Thank you for video.
what is the black wire coiled on the right hand side that is coming from behind, down to the rear of the table?
Right hand side , bottom of the monitor?

Please post schematic of parts and connection.

Interesting but it would be nice to get more info
Can you show closer waveform ( shape of waveform)
what is the frequency of oscillation?
What is pick to pick voltage of oscillation?
What is multi meter - type ( model number)?
What is range of DC V switch to?
What is internal resistance of multi meter?
What is the model number of transistor?

Wesley

Everyone should contribute to the goal we need to achieve.Future of our life might be months or days away .
It will be avalanche in any aspect of it. We are the army that would benefit the most and at first.

Sorry for me not being here and thank you for your support . That what friends are for.
We are working on it.
Arunas T-1000 :I have not been in contact with him for few days.
But I speak to Aidas every day.

I have problem to get quick HV diodes 500ma 15000V
The sources are i China and 20-30 days of waiting.
Ebay does not offer anything fast unless you pay $50 per diode.

any suggestion for area of NY?

diodes are a problem... we need to figure something cheap out for that purpose...
read this!
http://www.kronjaeger.com/hv/hv/comp/rect/index.html

BobQc · « **Reply #7962 on:** October 24, 2011, 05:30:23 PM »

@stivep
you could try Newark.com

http://www.newark.com/jsp/search/browse.jsp?N=422+200853+810093920+810092741&No=0&getResults=true&appliedparametrics=true&locale=en_US&divisionLocale=en_US&catalogId=&prevNValues=422+200853&mm=1001141||,&filtersHidden=false&appliedHidden=false&originalQueryURL=%2Fjsp%2Fsearch%2Fbrowse.jsp%3FN%3D422%2B200853%26No%3D0%26getResults%3Dtrue%26appliedparametrics%3Dtrue%26locale%3Den_US%26divisionLocale%3Den_US%26catalogId%3D%26prevNValues%3D422%2B200853

15KV Reverse Voltage Vrrm
550ma

Cheers
Bob

DreamThinkBuild · « **Reply #7963 on:** October 24, 2011, 05:56:13 PM »

Hi Wesley,

Here are two other sources when searching for "High Voltage Microwave Diodes" in Google.

Ohio
http://www.electronix.com/microwave-repair-diodestriacs-c-435_238_258.html?catalog=defaultphp

Nebraska
http://www.surplussales.com/Semiconductors/Diodes-1.html

stivep · « **Reply #7964 on:** October 24, 2011, 06:01:23 PM »

Quote from: DreamThinkBuild on October 24, 2011, 05:56:13 PM

Hi Wesley,

Here are two other sources when searching for "High Voltage Microwave Diodes" in Google.

Ohio
http://www.electronix.com/microwave-repair-diodestriacs-c-435_238_258.html?catalog=defaultphp

Nebraska
http://www.surplussales.com/Semiconductors/Diodes-1.html

Thank You for your help guys

Wesley

News:

User Menu

Author Topic: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze (Read 16546589 times)

Mannix

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

T-1000

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

xenomorphlabs

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

FreeEnergyInfo

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

From other Planet

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

forest

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

energia9

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

energia9

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

xenomorphlabs

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

Jury1

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

stivep

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

energia9

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

BobQc

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

DreamThinkBuild

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

stivep

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze