Hey Core

Any links to the subject? Cosmo said it is not yet time for FE, but soon.

Mags

Here is a link to a PDF file of a filed complaint in the State of New York. This case will bring the whole system down on there heads.

link: http://divinecosmos.com/media/Keenan_complaint_11-23-2011_SDNY.pdf

Far from a conspiracy, but sounds like a Hollywood movie.


Some quick history, back in 2000/2001 another case was brought up against some banks for 'fixing' gold trading.

Research:
UNITED STATES DISTRICT COURT District of Massachusetts
 
 Civil Action No. 00-CV-12485-RCL

Reginald H. Howe, (Plaintiff)
 
 V.                             
 
 Bank for International Settlements,
 Alan Greenspan,                       
 William J. McDonough,               
 J.P. Morgan & Co. Inc.,             
 Chase Manhattan Corp.,           
 Citigroup, Inc.,                     
 Goldman Sachs Group, Inc.,     
 Deutsche Bank AG and           
 Lawrence H. Summers,           
 Secretary of the Treasury,     (Defendants)   


Long story short, this is how that case ended.

Reg Howe's lawsuit in U.S. District Court in Boston against the Bank for International Settlements, Fed Chairman Alan Greenspan, New York Fed President William J. McDonough, J.P. Morgan & Co. Inc., Chase Manhattan Corp., Citigroup Inc., Goldman Sachs Group Inc., Deutsche Bank AG, and former U.S. Treasury Secretary Lawrence H. Summers.   On August 16 Judge Reginald Lindsay of U.S. District Court in Boston has scheduled for 3:30 p.m. Tuesday, October 9, 2001, a hearing on the defendants' motion to dismiss the lawsuit brought by a consultant for the Gold Anti-Trust Action Committee, Reginald H. Howe, against the Bank for International Settlements, the U.S. Federal Reserve and Treasury Department, and several bullion banks.   Critical investigation records ceased to exist and most of the investigators died  on September 11, 2001.  On October 9, 2001 the motion to dismiss was heard.  The case was dismissed.

That was a real case in the courts that dealt with the fixing of gold prices by banks for there benefit.

-Core


Sorry guys didn't mean to sidetrack the hard work people are doing. But this is all part of suppression.

Hmm, is there different models of the KT805AM?
From what i have found the hfe is far from 1000 which would indeed make it a Darlington.
See here:
doc.chipfind.ru/pdf/vzpp/kt805am.pdf
http://alltransistors.com/transistor.php?transistor=39145

The hfe is stated with 15

Baroutologos, where did you order yours and have that information from?

Hey xeno,
regarding this transistor i have seen more than one conflicting datasheets. see also http://www.ic-on-line.cn/search.php?part=kt805am&stype=part this is more close.
Btw, i bought them from http://stores.ebay.com/bird-sr71a?_trksid=p4340.l2563.

@kator,

its not necessary the source voltage to "oscillate" in order kacher to work. Kachers can work from any voltage source as long as it provides without much impedance the neccesary current. Eg. with a transformer and smoothing caps or as in my last case, batteries ---> chokes ---> 1uf + 33nf caps. Because chokes restrict the "access" of the HV current to batteries so as to be used as capacitative reservoirs or ground, a grounding to the emmiter is provided in that case.

I am not talking about efficiencies btw. Kacher efficiency is not my forte it seems. So far, with the KT805AM tranistors get inferior resuslts that the MJE15030.

 Does anyone have experience with an e-cad program that we could use to model the electric and magnetic fields accordingly. We could use the Plasma experiments and what we have seen there to model this field set to better see this effect and devise ways to harvest the thick magnetic fields. Instead of being blind about this and guessing lets model this and know for sure. Not only the program but we need someone good at modeling..

NOW I HAVE 250Vpp @ 1MHZ on a 230V/60w incandescence lamp .
Of course the lamp is not at max as I have 176V rms instead of 230V rms on house rail......

Hi Roberto,
Does your DDS20 Func Gen still work?


Correct me if I am wrong, but is the mains about 640 V p-p and if you have 250 V p-p you have about 0.4 of normal mains, so about 90 V rms.
So does that equal about 23.5 watts output and 26.4 watts input?


Meggerman

Hi Meggerman,
nice to hear from you , yes my DDS20 is still operating. Have you seen that Analog Device has small IC able to span that frequencies under a single trimmer control? The IC does contain a full DDS system!! The only problem for me is that the SMD package is so tiny that is quite difficult to hand solder it ..without destroing it.
About my Kacher: No, is not what I tried to explain. The mains I have here is 230V rms. The output on lamp is made with scope so the peak to peak measure is 250V that converted to rms  gives 250*0.707= 176,75V. Why all that?  just to have an idea to evaluate the lamp light.
Are you trying that device? It is very easy and quick to assemble, generally it runs immediately and is the easiest way (only a cheap tran and a resistor) to excite a Tesla magnifier coil providing even streamers on the open end. The way to take the output is also genial. I took only a couple of days to build two versions of the device and find a good optimization experimenting many setup. Now I am able to obtain stable 250Vpp with 230V/60W lamp connected drawing about 1A from a 24V battery. It is my opinion that there is still space to make further improvements.
Roberto

Hi Meggerman,... No, is not what I tried to explain. The mains I have here is 230V rms. The output on lamp is made with scope so the peak to peak measure is 250V that converted to rms  gives 250*0.707= 176,75V. Why all that?  just to have an idea to evaluate the lamp light....

hey ronotte,
dont get confused man. 250 p-p equals 250 * 0.707 * 0.5 = 88+ volts rms. Assuming you have a 230 volt 60w lamp, this should be run on 650+ volts p-p @ an average current (rough estimations) 0.26 Amp in order to output indicative wattage. Anyway, you got the picture...

ps: Can you provide a datasheet for the TIP23 (does it exists?)... it gives me a hard time to spot it.

I wonder what other kind of usable load is possible to use. In fact working at 1MHz it seems not possible to connect any other thing: so to be useful it could for example be transformed to 50Hz....
Roberto

@ronotte

Why not take that HV output and marry it to a scaled down Caduceus Coil (CC) via the spark gap and see what happens. Then read off that reduced output.

The other option is taking a Microwave oven transformer  (MOT) and sending the HV to the secondary and take output from the primary but a MOT ay generate more losses then the CC.

Also, you can wind a thicker wire coil over the tall secondary and feed off the RE while it should not hinder the HV of the secondary from making the spark gap. If the third coil can produce output as well, then this can be returned to source via a dioded cap and zener diode.

@verpies

That driver TPS2833 is not available locally.

The last dual driver circuit that I made is still working (incredible I know) and I would like that one also to be FG driven as well a making a few single drive circuits. This would be a major time saver and enable me to advance very quickly in finding the right effects.

I just got word that my flybacks arrived at the post office.

wattsup