Author Topic: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze (Read 16604584 times)

Bruce_TPU · « **Reply #2595 on:** June 21, 2010, 05:07:22 AM »

Ground Wire, NOT ground coil, my typo!

I believe he is using TWO transformers!

The Ground wire goes through the Core. Then he says "Below" and "down under" in reference to the "Output Coil". What would the result be of putting a 220 V transformer in a ferromagnetic core, with and "output" coil running through it? I believe this is WHY there has to be a ferromagnetic coil.

It is NOT what you can see, but what is NOT seen...as usual. And it is WHAT HE SAYS that is important! (if the translation is accurate!)

Cheers,

Bruce

Edit:
OK! I see that the Transformer is indeed UNDER the Output coil. So it is closed Loop, Output coil to 220 Volt transformer and Bulb. Transformer to Spark Gap and Spark gap Wire Also going through Ferromagnetic Core.

Edit #2
But, there are still more wires through the core as one can see... The big one is the TP 5, that is the ground. One is the Wire from the spark gap, goes through the core and too where? And the other one? Where is it from?

stivep · « **Reply #2596 on:** June 21, 2010, 05:39:42 AM »

Quote from: grizli on June 21, 2010, 02:19:38 AM

I am sure 99% people totally agree with you here ..

Yes they should... and history repeats when such things are patented like OU devices... , and it will repeat and repeat. We all here witnessed that many times.

NO WE ARE NOT TRYING TO REPAT KAPANADZE
We are trying to take advantage from everyone who contributed in this field

I have perfect fluency in at least 3 of Eastern European Languages
That gives me access to all of the Slovian root of linguistic similarities.

Isn't that surprising that all of the success in the area of Tesla Invention originated from this part of the world, including Nicolas Tesla by himself ?

The progress in partnership for NO MONEY and our the position in this area is as fallow:

1. In Poland Jacek was able to light the light bulb from HV
2. The signal representation in laboratory is investigated in reference to Lo Voltage and High Voltage signals.
3. You do not have to geest what is relay going on when we finish we are willing to give it up.
4. The explanation is in Polish but major factors are in English

http://www.youtube.com/watch?v=9Q8r2ikJtZ0

Bruce_TPU · « **Reply #2597 on:** June 21, 2010, 05:59:37 AM »

Okay! Here are a few more wires that can be traced.

A really amazing video, selfrunning. I have not seen something so captivating, since Steven Mark's TPU. This appears a MUCH safer way to generate self sustained power! This video has me very excited!!

Cheers,

Bruce

EDIT:
The wire with the question marks, appears to be the ground from the transformer. That is all I can deduce, but I think it a good start!!

Bruce_TPU · « **Reply #2598 on:** June 21, 2010, 07:05:41 AM »

Last Post of the night...

First let me say, I know that the drawing below does not have the Capacitor, or the heavy duty transistors, etc. But is simply a "roughing idea" of which wires are through the core. If I have missed anything, please feel free to draw it in.

Perhaps Groundloop or someone skilled with circuits can put together a reasonable semblance based on the video. There seems to be enough in the video, to make a decent attempt at a circuit.

Cheers,

Bruce

EDIT:
at 3:40 in the video, he mentions and you can see a SECOND transformer. He states that the transistor generates a signal to this transformer, and this HV transformer ignites the SG.

flathunter · « **Reply #2599 on:** June 21, 2010, 07:34:25 AM »

[A author=stivep link=topic=7679.msg246068#msg246068 date=1277091582]

NO WE ARE NOT TRYING TO REPAT KAPANADZE
We are trying to take advantage from everyone who contributed in this field

I have perfect fluency in at least 3 of Eastern European Languages
That gives me access to all of the Slovian root of linguistic similarities.

Isn't that surprising that all of the success in the area of Tesla Invention originated from this part of the world, including Nicolas Tesla by himself ?

The progress in partnership for NO MONEY and our the position in this area is as fallow:

1. In Poland Jacek was able to light the light bulb from HV
2. The signal representation in laboratory is investigated in reference to Lo Voltage and High Voltage signals.
3. You do not have to geest what is relay going on when we finish we are willing to give it up.
4. The explanation is in Polish but major factors are in English

http://www.youtube.com/watch?v=9Q8r2ikJtZ0
[/quote]

Wow!

Thats quite a setup on the youtube vid - well done stivep and keep up the good work!!!!

Maybe someone fluent in Polish can translate and add subtitles??

wings · « **Reply #2600 on:** June 21, 2010, 09:32:29 AM »

@ stivep

great videos can you post a diagram

exnihiloest · « **Reply #2601 on:** June 21, 2010, 10:12:39 AM »

Quote from: e2matrix on June 21, 2010, 12:27:05 AM

...
Also a double pole double throw switch or relay would be nice to take it off the mains once it is running and looped. If you got light then you have just hit the jackpot! And it would seem to be an easy way to show whether this is OU or not.

I agree and I already said the same. I would like this to be the only method for any device before claiming OU.

broli · « **Reply #2602 on:** June 21, 2010, 10:21:14 AM »

The below was suggested by a not so cooperative person. You can call it "On the effects of a high voltage coil/field near a transformer". According to him the fan will speed up near the high voltage coil. Can someone with a high voltage setup confirm this?

stephenafreter · « **Reply #2603 on:** June 21, 2010, 10:36:57 AM »

@All: info about D'arsonval cited by Don Smith is already available in English online, on this great website : http://www.electrotherapymuseum.com

See these very detailed books that explain a lot about Tesla' tech:
http://www.electrotherapymuseum.com/Library/CurtisHighFrequencyApparatus/index.htm
http://www.electrotherapymuseum.com/Library/Strong/index.htm

And an original book by Tesla himself:
http://www.electrotherapymuseum.com/TeslaArchive/OnLight/index.htm

Available in pdf format here, thanks to Broli:
http://www.woofiles.com/dl-199245-VfGEDBLN-TeslaOnLight.pdf

baroutologos · « **Reply #2604 on:** June 21, 2010, 10:47:22 AM »

Quote

ADMIN:

Hi Bruce and ALL,
in the original , they showed the cooler grill buried in the ground,
but later they used only the waterpipe to ground the circuit and
in the later videos also only ONE groundwire was used.

So it seems to okay, just to use one ground wire.

I guess they just suck out of this good conducting ground
wire the free electrons in resonance.

As the ampereter shows around 22 amps, there you have it.
The Kapanadze circuit must be a High Voltage pulse excited
resonance system for 50 Hz which pumps the 22 amps back and
forth from the ground to the bulbs via a 50 Hz resonance system.

Otherwise the meter would not work correctly, if there would be
flowing just radio frequency burst pulses in this ground line.

Maybe someone can finally use a pickup coil on a scope
and show us the waveforms, that the Kapagen circuit from
Naudin generates ?
Without using a scope we are just blind with these circuits...
How can we optimize it, if we donÂ´t know the waveforms ?

Many thanks.
Regards, Stefan.

i have pointed out several times again. How is it possible to suck 20 amps at 50Hz or even 400Hz from earth to whatever device? I have estimated you need an "ONE TERMINAL CAPCITANCE" of 100-500uf

Most of Tesla coil's single terminal capacitance is 50-200pico-farards. Some 6 orders of magnitude lower. This is imposible. Actually Tesla tried to tackle this issue (Colorado Springs notes 88-89pp. This is a big question mark also.)

For the experienced in this technology and whoever can understand what i say in technical terms not in "ather" bs-tology, this is a big question mark similar in size that of free energy in Kapanadze device.

Tackle with this, and you tackle with kapanadze device secret.

MrWolf · « **Reply #2605 on:** June 21, 2010, 11:08:00 AM »

Hi Bruce & all!

It was very hard to translate part when SR talks about output solenoid and transformer. I tried to give exact words but when combining his gestures, words and intonation I would say that exact words do not give correct answer!
IMHO answer is that "output " (big solenoid) only powers 220V transformer below, and everything else, including the bulb, is powered from that 220V transformer. I suggest to investigate where the wires from bulb exactly go, IMHO they go into 220V transformer.

So I'm presenting the "Kapanadze process" to you as I understand it at this moment (version 0.2):

1) transistor A controls HV transformer
2) HV transformer feeds some capacitor/diode/sparkgap combination B
3) B gives sparks/impulses with 50Hz frequency and one polarity
4) impulses go to Tesla primary coil C (6 turn)
5) C kicks long secondary solenoid D (Tesla bifilar?) real hard
6) solenoid D kicks core E formed from stack of ferrite rings (REALLY HARD)
7) core E flips domains (in panic)

in steps 4-6(-7) 220V transformer F is disconnected from solenoid D with help of power transistors pair G that are in sync with A
9) 220V transformer F is now connected to secondary D with help of G and
feeds off EMF created by domain flip in E
10) F is again disconnected with help of G
11) back to step 4

It seems that Kapanadze placed F on D together
(thats why he has extra secondary coils) and SR
placed F separate from D.

All the resonance Kapandze talks about is just
keeping 220V transformer disconnected when
Tesla coil kicks ferrite core real hard.

Only thing I'm not sure about is this grounding
business but it seems that Tesla coil is
"sucking energy in" like shown on multiple videos,
so logical place for organizing that energy is
placing something inside of Tesla coil, like
beefy "ground antenna"

I'm not electronics guy so I leave circuit design to you

(Crowdsourcing kicks a**!)

PS. I'll try to dig up more about this core sparking business
on russian forum.

exnihiloest · « **Reply #2606 on:** June 21, 2010, 11:10:28 AM »

Quote from: MrWolf on June 20, 2010, 09:46:57 PM

...
I have done experiments with Leedskalnin's Perpetual Motion Holder:
- I take split ferrite ring core (RF supressor removed from casing)
- make coil on both parts, even 10 turns of .2mm or 0.4mm work, but more is better
- I put core parts together to form a ring
- *spark* one coil from small 12V battery
- apparent shockwave hits the core with loud CLICK (Tesla says these are electrons pushed out from conductor because of longtitude shockwave), click is not coming from spark but from place where coil is on core
- core parts stick together like magnets (holds own weight)
- I can detect no external magnetic field even with compass
...

I don't understand where there would be a mystery here.
When you "*spark* one coil from small 12V battery" it creates a magnetic field in that core part, attracting the other part and then, the magnetic field lines loop along the ring formed by the 2 parts.
So there is no magnetic field outside the ring.
It is the same thing as presenting 2 U shape permanent magnets facing with opposite poles and let them stick one another.
You get a magnet with an enclosed magnetic field.
It is the principle of a toroidal core but with a static field instead of a variable field. No external field can be detected and only weak quantic effects can be detected at a distance (see "Aharonov-Bohm effect").

Pirate88179 · « **Reply #2607 on:** June 21, 2010, 11:19:07 AM »

Broli and others as well. Please keep your photos to no larger than 800 x 600 otherwise it messes up the entire page and folks have to then use a scroll bar to read all of the posts.

I have re-sized the photo. Thanks for posting it just please use the proper sizes.

Thanks,

Bill

MrWolf · « **Reply #2608 on:** June 21, 2010, 11:19:35 AM »

Quote from: exnihiloest on June 21, 2010, 11:10:28 AM

I don't understand where there would be a mystery here.

It is not about mystery, it is about making magnetic transistor and controlling big forces with small forces. I have also made purely mechanical magnetic transistors based on the LaFonte Group work.

Pirate88179 · « **Reply #2609 on:** June 21, 2010, 11:21:02 AM »

MrWolf:

Sort of like a relay...controlling large power with small power?

Bill

News:

User Menu

Author Topic: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze (Read 16604584 times)

Bruce_TPU

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

stivep

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

Bruce_TPU

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

Bruce_TPU

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

flathunter

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

wings

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

exnihiloest

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

broli

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

stephenafreter

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

baroutologos

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

MrWolf

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

exnihiloest

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

Pirate88179

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

MrWolf

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

Pirate88179

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze