Author Topic: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze (Read 16599752 times)

hartiberlin · « **Reply #1695 on:** June 03, 2010, 09:03:05 PM »

Well found !
He is probably now working on the description to set up all his webpages
about it.
He still has not linked it to his main site, so it is still a hidden page.

darkspeed · « **Reply #1696 on:** June 03, 2010, 09:12:09 PM »

There is a MOT in the box along with a gray powercord that goes to a power supply.

Im guessing he is trying to show watts in vs watts of light? that math never works out..

Just have to wait and see...

Looks like an RF pump.. HV pulse in a coil creates a RF in the long ground line " like watter hammer " and the highest current in the bulb is produced when a node occurs at one end of the filament and an anti-node occurs at the other. ( or two inverse anti-nodes )

hartiberlin · « **Reply #1697 on:** June 04, 2010, 02:13:22 PM »

Now JL is already at around 750 Watts output !

http://jnaudin.free.fr/kapagen/kapagen32040610.jpg

Wow !

The question is, what does he put into it ?

Regards, Stefan.

baroutologos · « **Reply #1698 on:** June 04, 2010, 02:35:00 PM »

yes, today Naudin added this photo. The point is the lamps mentioned are not lit at their nominal power. I can draftly estimate a 30% of the rating of all bulbs combined.

But this really does not saying anything.

IMo the weirder part is that all loads are serially connected and the end of them going to ground (distant grounding rod).

In any case a diagram and explanations really needed.

forest · « **Reply #1699 on:** June 04, 2010, 03:02:40 PM »

eeee it's just a transformer

xenomorphlabs · « **Reply #1700 on:** June 04, 2010, 04:02:56 PM »

Quote from: forest on June 04, 2010, 03:02:40 PM

eeee it's just a transformer

Show us the transformer that operates exactly like that

Naudin uses 2 earth grounds, where Kapanadze uses only one.
And that seems to be key to NaudinÂ´s set-up.
The yellow thick wire is actually on one end connected to the left earth ground then goes through the lamps into the other earth ground.
So this is the Tesla one wire transmission.

It seems he has also no ferromagnetic core. However there must be a reason why he covered the left opening of the tube with something, so you canÂ´t look inside. So maybe there is rods inside or something.

The HV impulses go into the blue cable that seems to be part of the primary, but since Naudin doesnÂ´t show the backside of the coil, itÂ´s impossible to tell what is going inside the box.

gyulasun · « **Reply #1701 on:** June 04, 2010, 06:47:57 PM »

Tesla's work is surely involved somehow because Naudin references Tesla's Colorado Springs Notes at the bottom of his page:

http://jnaudin.free.fr/kapagen/

A good quality PDF file and downloadable

Goat · « **Reply #1702 on:** June 04, 2010, 10:39:23 PM »

Quote from: xenomorphlabs on June 04, 2010, 04:02:56 PM

" since Naudin doesnÂ´t show the backside of the coil, itÂ´s impossible to tell what is going inside the box."

@ xenomorphlabs

For what it's worth....

At 2:20 in the Kapagen v3 Youtube video you can see the MOT connections (more or less) as the input being fed by the grey wire(s) from the ATV3 power supply. From there one blue wire goes to the spark gap and the other blue wire going to the coil.

I'm not sure how close his replication is compared to the Kapanadze circuit but I look forward to seeing more from him.

Regards,
Paul

the_big_m_in_ok · « **Reply #1703 on:** June 04, 2010, 11:46:55 PM »

Quote from: cgx on June 03, 2010, 08:47:35 PM

You can find the beginnings of Naudin's Kapagen page at http://jnaudin.free.fr/kapagen/
A few more pictures of the setup there, sadly no schematics or description yet

I don't think even Kapanadze drew wiring diagrams for his invention in his descriptive videos, right? Naudin will eventually provide drawings of his test prototypes, however. He's been honest about that.

--Lee

starcruiser · « **Reply #1704 on:** June 05, 2010, 12:25:06 AM »

The design is showing counter wound coils again, the blue coil looks to be RH wound and the 5 turn one is LH wound. The MOT is feeding both ends of the blue coil, one of the MOT leads goes thru the center of the PVC tube to the right side ground/center wire lead. The other MOT lead is connected via the SG and connects to the Left side of the blue coil. Seems to be an electron pump using a smaller coil to provide an imbalance in the bloc wall, thus a diode or gate effect perhaps?

callanan · « **Reply #1705 on:** June 05, 2010, 12:55:53 AM »

Quote from: xenomorphlabs on June 04, 2010, 04:02:56 PM

Naudin uses 2 earth grounds, where Kapanadze uses only one.

In Kapanadze's original and long video, one ground is connected to a car radiator buried in the ground and another ground is connected to the back yard house water tap pipe. Are we so sure he didn't use both grounds?

Pirate88179 · « **Reply #1706 on:** June 05, 2010, 01:22:55 AM »

Quote from: callanan on June 05, 2010, 12:55:53 AM

In Kapanadze's original and long video, one ground is connected to a car radiator buried in the ground and another ground is connected to the back yard house water tap pipe. Are we so sure he didn't use both grounds?

I was thinking the same thing. My thoughts are that he did use both of them.

Bill

kooler · « **Reply #1707 on:** June 05, 2010, 03:48:41 AM »

hello
the radiator is a brass/copper mix.. that he threw in the hole with water.. so that would be a positive.. right?

robbie

slapper · « **Reply #1708 on:** June 05, 2010, 04:31:06 AM »

I think the other end was a outdoor spigot connected to a water pipe.

uhm - iron?

nap

darkspeed · « **Reply #1709 on:** June 05, 2010, 04:47:23 AM »

using two remote ground locations connected by a wire is half your circuit....

the earth between the two remote grounds is the other half of your circuit

in total it creates a one turn coil with a given inductance, resistance, and capacitance

think of a merry-go-round but you tie off one side to a tree with a bunji cord then give it a push - it will only go so far before it snaps back and then begins to oscillate back and forth

the ground portion is the bunji cord

News:

User Menu

Author Topic: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze (Read 16599752 times)

hartiberlin

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

darkspeed

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

hartiberlin

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

baroutologos

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

forest

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

xenomorphlabs

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

gyulasun

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

Goat

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

the_big_m_in_ok

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

starcruiser

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

callanan

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

Pirate88179

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

kooler

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

slapper

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

darkspeed

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze