2. High Frequency is used to Run the Primary.

Totally contrary to the teaching of Figuera. Figuera used mechanical switching, therefore he could have just used low frequency excitation. He did not used spark gaps nor electronic circuits, so he could not get high frequency. Please read the patent and study it. Figuera used around 100 V and 1A.

You see. It is not me the one who is suggesting using HF. HF is asociated to high voltage and therefore microwaves. Take care. This is totally contrary to the low frequency generator of Figuera. Which is the maximum frequency that you may get with a mechanical switching? 50 Hz, maybe 100 Hz? This device is as the one from Hubbard, Hendershoot generator, all powered at low frequencies. Please do not propose systems far away from the patent design.

It's amazing, people that DON'T even Know what PART G is are suddenly an EXPERT on Figuera with no working device giving out advice on how to build a free energy device.

NOW THAT'S PRECIOUS.

Hanon can i interest you in two SHAM WOW'S and some rubber spoons for the invaluable Tech support you just received.
you should be thrilled.

The heart pulses in a vortech motion. meaning it twist's as it contracts, if you want to sound like you know anything at least research it first.

 

Darediamond:


But why go that slow and costly lane when you HAVE A FAR MORE BETTER OPTION IN THE NAME OF INVERTER??

WHY??

 
http://www.circuitsgallery.com/2012/09/sg3524-pwm-inverter-circuit2.html"


This chip only puts out 60hz for a regular dc to ac power inverter and you still need the power amplifiers.
 An 8 pin op-amp or even a 555 chip can be made to put out a sine wave at any frequency you want.
It's a far easier solution for experimenters than a complex 16 pin ic that has features we don't need.
   I agree with you that higher frequencies would greatly increase efficiency. This was proven years ago when
they stopped using bulky power xformers in computer power supplies & instead are pulsing very small xformers
in the khz range. Ultra light units that can put out 20 amps.
Don Smith said that doubling the frequency would quadruple the output.
     I don't think HV is necessary for this unit to work. We only need a strong magnetic field that keeps varying in
the one direction. It can be made as strong as you like just by reducing circuit resistance.
    Because magnetism & electricity are so closely related, you can use either one to attract free energy.
 High voltage potential of a single polarity is one way. Or a strong magnetic field that varies only in the one direction
is the other.
    Too bad people get confused between the two and want to use both at same time.
Here I will state my theory along with the dozen of others on this thread.
   Charged particles of matter (only pos. or only neg.) are attracted into the strong magnetic field of the air gaps.
Therefore the more air-gaps or units the more energy we get. This is also why CF used 7 units.  Magnetic exposure
to the environment, I think is the key. This being so, then the width of the air-gaps might need to be optimized.
   CF was trying to replicate the theory of a dc dynamo which has a half dozen or so coils whirring past a magnetic
field coil. The more coils, the more power.
   That's the main reason for his 7 units. Other reasons are:
1. A coil too large in diameter will suffer inefficiency.  Outer layers not getting as much magnetic field as the inner.
2. Not enough room for larger coils.
3. Coils with large circumference will need much longer wires for same amount of turns.


       

It's amazing, people that DON'T even Know what PART G is are suddenly an EXPERT on Figuera with no working device giving out advice on how to build a free energy device.

NOW THAT'S PRECIOUS.

Hanon can i interest you in two SHAM WOW'S and some rubber spoons for the invaluable Tech support you just received.
you should be thrilled.

The heart pulses in a vortech motion. meaning it twist's as it contracts, if you want to sound like you know anything at least research it first.

It amazes me how you wrongly assume I know nothing in Practical about the disadvantages of your proposed mechanical switch which I nullified based on my Research.

What tech support do you have to offer?

Teach us something we do not know Mr. Marathon.....

What happen to your device?
 

Building Part G the way figuera Built it as we speak, by the way lets hear your interpretation of part G that you so called nullified. oh my god what a good laugh.  EVERY ONE can be at ease now that  darediamond has nullified part G.
you offer nothing just like Rswami does, just a lot of hot air that NO BODY follows that has any common sense.

My final device is almost complete how about yours, and i did say "FINAL".

Hanon i wouldn't follow the nut case if you paid me to. i think i'll stay my path."the right one"

and by the way Hanon didn't bow, he came to his senses, because i sent him all of my research plus he has his own and he quit listening to stupid shit.
imagine that !

Marathon, what is special about Part G of Figuera device? It is a MECHANICAL COMMUTATOR that will always needs to be replaced. It is Primarily used to switched the incoming DC voltage from batteries which CF used to power his coils.

This is not theory but practical: you can only at maximum get 100hz from ready-made motor driven commutator. I have tested this myself. 
The CF "Part G" will require an additional feature needed to absorb the High Voltage BEMF Spike to make the commutator run smoothly.
Now tell me, are there no better and simpler alternatives to all the complexities involved in building the Part G today in the name of those excellent Integrated ICs and there assistant in the name of Mosfet?

The slow-motion Part-G can be simply replaced with a Variable Frequency Inverter because as you yourself knows, Inverter Ultimately Possesses  the needed functions and nullifies the cumbersome functions of the Part-G in that it turns smothly DC to AC which is directly being switched on and off by the IC on it board. As for AC being generated by the inverter, no B.E.M.F will be generated by the coils because there frequency will not gets to 0. And because of the way an inverter works, you can easily switch at low voltage and get High Voltage.

No Noice, No Sparks, No wear and tear.

When you use a mechanical means to switch a Coil, it is the voltage that determines what the frequency will be. But with an Inverter, that is not the case because you have the Option of using a POT to adjust the IC output Switching Speed or Frequency at low Voltage as you wish. So you can separately adjust the Frequency to High Level  while maintaining the Voltage at  low level. Imagine that beautiful flexibility which aids Perfect Research and records taking smoothly.



The figuera device can only easily attain overunity without Earth Connection Provided High Frequency in the Khz is applied to the primaries and Lenz is canceled with the correct winding style or direction which Nicola Tesla himself introduced.

Now tell me which Motor in history till date can provide 5kz frequency or 300000rm?
 Can you refer to one?
 Or do you wanna disprove the fact that when a coil that was formerly draining 3A from a battery at say 100hz is now driven at 2000hz it Amp draw will reduce extremely to Milli amp range?

You do not even understand what I meant that Hanon formerly bowed so your line "because i sent him all of my research plus he has his own and he quit listening to stupid shit. imagine that!" is utter nonsense.

Building Part G the way figuera Built it as we speak, by the way lets hear your interpretation of part G that you so called nullified. oh my god what a good laugh.  EVERY ONE can be at ease now that  darediamond has nullified part G.
you offer nothing just like Rswami does, just a lot of hot air that NO BODY follows that has any common sense.

My final device is almost complete how about yours, and i did say "FINAL".

Hanon i wouldn't follow the nut case if you paid me to. i think i'll stay my path."the right one"

and by the way Hanon didn't bow, he came to his senses, because i sent him all of my research plus he has his own and he quit listening to stupid shit.
imagine that !

Not clear to me what the confusion is all about.

We have two groups..

One Group wants do the Figuera device as described in the patent.

Other group wants to follow the Figuera Principle described in the patent due to the sparking problem in the rotary device Part G.

Part G as interpreted and described by Marathonman seems to be slightly different and he appears to have done research in to old tech and old components.

Now my understanding of Figuera Patent is simple.

We need to rotate the magnet inside a dynamo. Because it is difficult the magnet is lower powered. If the magnet is made very powerful like the Neodymium magnets it will be very difficult to rotate it. This is why we have Low RPM Neo Magnet alternators.

Now if we do not rotate the core but give it pulsed DC or interruptted DC or AC the core becomes an electromagnet., The surrounding coils are also magnetised and they also produce power like in transformers. The advantage of this method is you can wind as many secondaries as you want and connect them in series. Primary can be made up of thin wires and secondary can be made up of thick wires.

Figuera has made another change. He has connected the cores directly. So there is no leakage of magnetic flux between the primary and secondary. I have seen that secondaries produce higher output than input only when the primary core is saturated. I have used AC only and not pulsed DC or interrupted DC. When using AC only if the secondaries merge higher output comes. Invariably this did not happen to me at lower magnetic field strengths but only at saturation. This is not considered safe and as I have personally experienced it is also not safe.

But it is correct that this enables us to use higher frequencies than what is normally given to primary. Higher the Frequency lower is the amperage.

The main problem with the Part G as I and Mr. Dare Diamond have built is the sparking problem. He describes a method of quenching sparks using HV capacitors but I do not have that kind of knowledge. But higher frequencies normally draw only lower amps and higher frquencies must also have higher voltage to draw some minimum amount of amps. Otherwise the magnetic field created is very low. Whether this will work in pulsed DC is something that I have not tested and so I cannot say any thing on it. Increasing the Frequencies reduces the amp drawn is some thing I can attest to for high frequency devices that I have built work for a long time even when using a 9 volt battery. They draw very littel amps.  They produce a low magnetism which is suitable for the human body. If we are going to use an electromagnet I would think High Frequency must be accompanied by High Votlage to draw reasonable amps.

Marathonman seems to have found an old record for Part G and seems to be building it. We need to wait and see how that device functions. His description of the device and its function is different. it is possible that he has got a Golden egg but he has not put up any device so far.

It is possible that if I had used pulsed DC the secondaries would have merged. The problem is at 220 volts a Full Wave Diode bridge Rectifier when connected to the Electromagnet draws too much of an amperage that the office circuit breaker cuts in. Therefore I need to arrange for high resistance coils to be made and then put in between the Diode Bridge Rectifier and the primary coils and then see if at lower magnetic field strength th secondaries merge. If they do merge and increase the voltage of the secondary at lower magnetic field strength, I would have built a device in accordance with the principles of Figuera but not the device as described by Figuera. The problem will be one of sustaining the device on its own and then inverting the pulsed DC to AC.

I think all of us have done very significant work here. There is no reason to fight whether Pure Figuera device alone should be built or following his principles are enough. Focus on Research and avoid fraternal fighting.

At the end all of us are trying to do something good and there is no need to fight among us. I do not have high resistance coils and I need to organize them. But once I do it it will be a simple any one can do device for there is no complexity.  Let me see if I can organize it.

No infighting and what you are saying is all correct. Marathonman would deserve our congrats if he can show the part G device as he describes because none of us including Hanon who did not even attempt it were able to built it. It is full of sparks for almost 6 to 8 inches when rotated at 1000 RPM. That is almost 450,000+ volts. I did not know what to do. Ultimately the device I produced had a frequency of 1 Hz to 2 Hz and still had a spark at a place.

DC commutators very rugged are built here but they are not similar to What Figuera has described. They appear to create a very mild spark which the carbon brush seems to be capable of handling. But these are ready made commutators and to order a single rotary device as Figuera has done will cost so much. it is possible that marathonman has done it and we will have to wait and see.

For those who cannot do it, I do not see what is wrong in following a simplified approach that they are capable of doing it. So without any infighting try to make further progress.