Author Topic: Kapanadze Cousin - DALLY FREE ENERGY (Read 11887775 times)

Void · « **Reply #7605 on:** December 19, 2014, 02:42:54 PM »

Quote from: andrea76 on December 19, 2014, 08:24:12 AM

new video of Ruslan
https://www.youtube.com/watch?v=3fYWY4bZIW0

Hi andrea76. That's good that Ruslan is giving more info/ideas. Unfortunately, I can't understand anything
he said there.

If anyone can provide a summary in English of the important points in the video, that would
be great.
All the best...

Void · « **Reply #7606 on:** December 19, 2014, 03:09:34 PM »

Quote from: a.king21 on December 19, 2014, 02:28:50 PM

This short video is interesting. A guy tries to explain some elements of the Kapanadze aquarium 2 device.
https://www.youtube.com/watch?v=Lg9O3vCg_Q4
He effectively puts the Kapanadze secret close to Thane Heinz and Melnichenko.

Hi a.king21. It's interesting. Akula also made a comment before that he thought Kapadnadze
may just be using some sort of special transformer arrangement to produce the over unity, and that
much of the other stuff he shows is just a decoy. It is all worth consideration, but also all
just speculation at this point unless someone can demonstrate it with a working device replication.

All the best...

GeoFusion · « **Reply #7607 on:** December 19, 2014, 07:50:41 PM »

Hi guyz

a.king21,
thnx for the link of the Kapanadze aquarium 2 device.
Very good. good tips.

back for a while again,
Just saw the new vid of our friend Ruslan and really seems he him self is trying now to learn
from the device and how the system works everyday.
https://www.youtube.com/watch?v=3fYWY4bZIW0

I heard and saw that he uses 1 of the 2 outputs (Thick blue wire / thinner blue gray wire) of the yoke to drive
the Kacher! the same in akula's schematic

. It's becoming more clear now what is going on.

Proof is here in this vid of Ruslan using Yoke output to Kacher.
https://www.youtube.com/watch?v=vUVlkJV42_A

So, this will generate alot of scalar/radiant energy around and into the grenade, and seems easier to bring in resonance
inbetween kacher and grenade because both are connected on the Yoke, same frequency drive and Sinuswave

.
I can somewhat understand Russian, so took time too analyze.

This will be the next try out on bench, Almost done with the TL494 and IR2110 inverter circuit which I think is the circuit of great importance. This circuit was also used in Akula's first Device
https://www.youtube.com/watch?v=_e3RpsEZE14

Schematic of the driver
https://www.youtube.com/watch?v=HU88sV7yVcw&src_vid

So this means automatically that the kacher is receiving higher Voltages and Amps from yoke and rectified of course.

Pic below shows a shot within the vid and the wires He says he uses for kacher input.

MenofFather · « **Reply #7608 on:** December 20, 2014, 12:35:41 PM »

Quote from: Void on December 19, 2014, 02:42:54 PM

If anyone can provide a summary in English of the important points in the video, that would
be great.
All the best...

He saying, that kacher always working, it not stoping-running.

Void · « **Reply #7609 on:** December 20, 2014, 03:32:43 PM »

Quote from: MenofFather on December 20, 2014, 12:35:41 PM

He saying, that kacher always working, it not stoping-running.

Hi MenofFather. Thanks mate.
Al the best...

MenofFather · « **Reply #7610 on:** December 20, 2014, 05:33:26 PM »

Itsu, you can test that schematic. Oscilioscope only one (+) conected to 2 turns wound tin wire around six layers. You must found resonance of 37,5 meters six layer coil on about 1.6-1.7 megaherc.

a.king21 · « **Reply #7611 on:** December 20, 2014, 09:14:16 PM »

I am beginning to think that the Kapa secret is more akin to the Thane Heins system, and that everything else is to throw us off the scent.
I have been thinking about my conversations with Tariel's assistant - a highly qualified lady engineer who he uses to design his moving devices. His moving devices are just a smokescreen for the real secret. She told me that Tariel is terrified and haunted by this fact and he tries to disguise and hide the real secret at every turn. The reason is that once discovered, it is so simple that anyone could build it.

He first discovered this secret in 1996 and ran a 1 kw load for three months. I think the load was probably one of those Soviet Era 1 kw bulbs. I think that the bulb eventually packed in.
Tariel told me that he can not think of a way in which his device is produced and yet his secret is kept. He does not understand the way business is done in the West at all.
It is certainly the case that Tariel makes one component himself.

a.king21 · « **Reply #7612 on:** December 20, 2014, 09:30:49 PM »

A component something like this:
https://www.youtube.com/watch?v=xNCgPWagn1s

Void · « **Reply #7613 on:** December 20, 2014, 10:19:59 PM »

Hi Menof. So out of 11 1/2 minutes of talking in his recent video, the only thing Ruslan said
that was new/important was that he is running the kacher continuously? Nothing else?
He seemed to have discussed a number of things in that video.

Regarding the test for resonant frequency of the grenade, measured as you showed in your diagram above:
With earth ground connected to the layer 1 wire on the grenade: 1.57 MHz
With earth ground connected to the layer 6 wire on the grenade: 1.66 MHz

All the best...

MenofFather · « **Reply #7614 on:** December 20, 2014, 10:32:49 PM »

Quote

Hi Menof. So out of 11 1/2 minutes of talking in his recent video, the only thing Ruslan said
that was new/important was that he is running the kacher continuously? Nothing else?
He seemed to have discussed a number of things in that video.

I not bealive, that that things is important.

Quote

Regarding the test for resonant frequency of the grenade, measured as you showed in your diagram above:
With earth ground connected to the layer 1 wire on the grenade: 1.57 MHz
With earth ground connected to the layer 6 wire on the grenade: 1.66 MHz

All the best...

Lenght is probarly 37.5 meters?

See? Ruslan mentionig that his kacher frenquency is 1,5-1,6 or 1,7 megaherc.

You can wound now 11 meters inductor on that multilayer coil in bifilar way and leave it unconected and check how it changes resonant frenquency.

And in 12 volts system in his divice ground conected to first layer. In 24 volts system in his divice ground conected to 6 layer. And he say, that in 12 volts system kacher frenquency is something about 1,5-1,6 megaherc. And in 24 volts system something remember I about 1,7 megaherc.

Acca · « **Reply #7615 on:** December 20, 2014, 10:33:13 PM »

Any one saved the latest clip from Ruslan ? Looks like he just deleted that clip !!

Acca...

Void · « **Reply #7616 on:** December 20, 2014, 10:38:26 PM »

Quote from: MenofFather on December 20, 2014, 10:32:49 PM

See? Ruslan mentionig that his kacher frenquency is 1,5-1,6 or 1,7 megaherc.
You can wound now 11 meters inductor on that multilayer coil in bifilar way and leave it unconected and check how it changes resonant frenquency.

Hi Menof. Ok, I have to go out now, but I will try winding the 11m inductor on later, and
leave the wire ends unconnected, and then retest the resonant frequency again.
My grenade length is close to 37.5m. Maybe a little bit longer.

Quote from: MenofFather on December 20, 2014, 10:32:49 PM

And in 12 volts system in his divice ground conected to first layer. In 24 volts system in his divice ground conected to 6 layer. And he say, that in 12 volts system kacher frenquency is something about 1,5-1,6 megaherc. And in 24 volts system something remember I about 1,7 megaherc.

It's interesting. I will comment a bit more on this when I get back.
I am just going out.

Acca, yes, I saved the latest video from Ruslan.
All the best...

d3x0r · « **Reply #7617 on:** December 20, 2014, 11:07:59 PM »

Quote from: MenofFather on December 20, 2014, 10:32:49 PM

I not bealive, that that things is important.

Love getting things filtered through third party belief systems.
Don't say anything at all if you won't provide all information objectively.

John.K1 · « **Reply #7618 on:** December 20, 2014, 11:21:17 PM »

Guys, I saw that clip once in hurry, but what I remember is that the yoke is the invertor and he is re-building it. It is also supply for our kacher. I think he said Akula design as on the drawing will not work. He says the ferite between the kacher and grenade plays VERY important role as provides the "spring " effect of suction of electrons. He also wasn't happy with "just 2Kw out. He wants around 6KW now

. Funny think is that he always reference to what Akula does instead what he does himself. It builds strange feeling in me - something for Hoppy

d3x0r · « **Reply #7619 on:** December 20, 2014, 11:29:01 PM »

there's a copy at https://www.youtube.com/watch?v=UPWf4Rugy4g

News:

User Menu

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY (Read 11887775 times)

Void

Re: Kapanadze Cousin - DALLY FREE ENERGY

Void

Re: Kapanadze Cousin - DALLY FREE ENERGY

GeoFusion

Re: Kapanadze Cousin - DALLY FREE ENERGY

MenofFather

Re: Kapanadze Cousin - DALLY FREE ENERGY

Void

Re: Kapanadze Cousin - DALLY FREE ENERGY

MenofFather

Re: Kapanadze Cousin - DALLY FREE ENERGY

a.king21

Re: Kapanadze Cousin - DALLY FREE ENERGY

a.king21

Re: Kapanadze Cousin - DALLY FREE ENERGY

Void

Re: Kapanadze Cousin - DALLY FREE ENERGY

MenofFather

Re: Kapanadze Cousin - DALLY FREE ENERGY

Acca

Re: Kapanadze Cousin - DALLY FREE ENERGY

Void

Re: Kapanadze Cousin - DALLY FREE ENERGY

d3x0r

Re: Kapanadze Cousin - DALLY FREE ENERGY

John.K1

Re: Kapanadze Cousin - DALLY FREE ENERGY

d3x0r

Re: Kapanadze Cousin - DALLY FREE ENERGY