Excuse me T-1000, but you've NEVER ever shown a self runner.  Nor did you or anyone else ever replicated that device later on, which needed not one but two signal generators feeding it power just to make it work.

  Hoppy: That was a bit of an overstatement. Maybe, only enough to fill my house to the roof. However, still many many thousands of boards went through my hands one way or another.  As I worked over 12 years or so in the assembly of many different kinds of PCB, soldering, inspecting, quality control, using military specs, and the like, etz...  But, mainly in the electronics assembly field, not as an engineer that designs all the circuits.  So, therefore my lack in that field, as well as in the use of scopes, signal gen, etz... as that was not my job.  But, it's not too late to learn about the use of those test instruments, now, I hope.

Its a wonder that you are not depressed and irritated just looking at circuit boards. Never too late to learn new things as the saying goes.

Similar to what?

Nelson showed the scheme only what's so unusual to follow as for me, where here is something about the performance?
or that it will facilitate us to understand.

  T-1000:  So, you think that Ruslan's last video device is not complicated. Like is shown in the first picture below. Well, I disagree.
I sure don't know how it works. As I'm not an electronics engineer. So, therefore I'm looking for alternatives.

  Nelson:  Is this the same driver as what is shown in the diagram that you just posted? (Second picture below). 
  Third picture (below) is of your self runner, which does not use the same Exciter driver circuit. Right?  Or does it?
 
 
 

Hi Nick ,

The circuit don't use that exciter but other circuit but basic is the same thing  . I build some circuits like a tools to test and study some behaviors, so this i like a tool for me .
I have other similar circuits but are identical in work process.
The circuit is basic even for the starters  and cheap to reproduce . Nick dont forget a thing , without the right tools like a scope it will difficulty to you tune your actual circuit or the circuit that i post. Is fundamental have the scope to things make some sense not only suppose or imagine how it work, but start understand how a single difference in capacitance in tank circuit , can real affect the circuit output or simple details can prevent the right work of circuit exciter .
I don't know everything and  will continue trying improve the outputs in circuit without the feedback stop is the reason to i say that is not yet finished, need to improved some aspects like suck more power without stop the oscillation.
If people have a bit attention at minute 13:45 of the video could see what happens when the feedback process stop, in input line of 9v battery soft touch,   i measure that with multimeter and what we could see ?  28v in line input when start with 9v battery but simple short the input will interrupt the oscillation without and sinal of short circuit .
Nick i think i make my contribution about this , now i need to focus to continue my work . So much time lost in writing and discussions don't take me  to another level if you understand .
Maybe when i finished the unity i shot a another video maybe .
Good luck for everyone .




     

Hi Nick ,

The circuit don't use that exciter but other circuit but basic is the same thing  . I build some circuits like a tools to test and study some behaviors, so this i like a tool for me .
I have other similar circuits but are identical in work process.
The circuit is basic even for the starters  and cheap to reproduce . Nick dont forget a thing , without the right tools like a scope it will difficulty to you tune your actual circuit or the circuit that i post. Is fundamental have the scope to things make some sense not only suppose or imagine how it work, but start understand how a single difference in capacitance in tank circuit , can real affect the circuit output or simple details can prevent the right work of circuit exciter .
I don't know everything and  will continue trying improve the outputs in circuit without the feedback stop is the reason to i say that is not yet finished, need to improved some aspects like suck more power without stop the oscillation.
If people have a bit attention at minute 13:45 of the video could see what happens when the feedback process stop, in input line of 9v battery soft touch,   i measure that with multimeter and what we could see ?  28v in line input when start with 9v battery but simple short the input will interrupt the oscillation without and sinal of short circuit .
Nick i think i make my contribution about this , now i need to focus to continue my work . So much time lost in writing and discussions don't take me  to another level if you understand .
Maybe when i finished the unity i shot a another video maybe .
Good luck for everyone .


     

Obrigado Nelson!!
Ariovaldo

Nelson is very similar
the diagram above is a red marker electrolyte selected all the magic!

Hi tomteck29

People should understand first some main concepts , and seems most replicators of this kind of circuits not understood the process of  fill a capacitor without conventional  current .  Need understand first some important concepts .

I left a text not write by me , but very important lecture to people understand some points of max importance .
Hope some people understand this information because have some real important details need to understood .


A method and apparatus for extracting bidirectional EM wave energy from the vacuum through the scalar potential gradient across the terminals of an electrical source, collecting the excess energy in a collector without entropy, then separately discharging the collected energy through a load to perform work, without sending the load current back through the primary source against its potential gradient; i.e., against its back emf. Removing the load current from the source thereby substantially reduces the production of work inside the source to dissipate its bipolarity; said internal dissipative work being well-known to be the cause of exhaustion of the source's ability to continue to furnish emf to the external circuit. By reduction of its internal dissipation, the source is enabled to furnish more energy for dissipation in the external load than is utilized to dissipate the source internally. Hence the source is enabled to operate with an overunity operational efficiency. The system permissibly operates as an "open" system, and extracts and utilizes excess EM energy from a free-flowing external source (the flux exchange between the surrounding vacuum and the bipolarity of the source), hence it can operate at an efficiency greater than unity without violation of the laws of physics, in a manner analogous to but entirely different from a heat pump. In this invention, it is not the purpose of the primary source to furnish current and dissipative power to the external circuit. The bipolarity of the source is utilized primarily as a dipole antenna to receive the bidirectional EM wave energy flow from the vacuum, and direct it without entropy through a switching unit to the collector. Conduction electrons in the collector are temporarily restrained while being overpotentialized by the excess energy being collected upon them. The collector and its overpotentialized electrons are then switched away from the primary source, and connected across the load as a separate circuit and closed current loop. The electrons in the collector and their excess energy are then automatically released to flow as current discharge through the load, releasing their excess energy to perform useful work in the load. The collector is then switched away from the load and back across the primary source, and another collection cycle is initiated. Iteration of the collection and discharge cycles provides power to the load. Additional collection and smoothing capacitances for smoothing the iterations and furnishing steady power to the load may be added as desired. The invention violates the closed circuit practice of powering loads, but does not violate the conservation of energy law, the second law of thermodynamics, or any of the other known laws of physics.

I left a text not write by me , but very important lecture to people understand some points of max importance .
Hope some people understand this information because have some real important details need to understood .

Was the author of it T.E. Bearden - http://www.cheniere.org/techpapers/Final%20Secret%20of%2015%20Feb%201994/ ?

 
I can not imagine how people have to understand your "speech" Use only the technical phrases ,after that, you have to be an engineer in the field of science and development.
-After not sound too appealing to us "grays boys"(users),almost have the impression that the overgrowth content on obtaining effect
beaver me that the guy does not refer to :"wikipedia"
I support your action that you base your knowledge on the act of practical use and therefore it is my words of appreciation. People who understand all issues do not spend time here just to earn big money,
NickZ
written
"The key unknown factor is a working feed-back"
 
system of feedback I am interested as "Nelson" wants us to direct, him where the above efficiency This large transformer is he toasting as it really is in this box, and why working on the HV system?
I would like to see a small looped system diagram?

I can not imagine how people have to understand your "speech" Use only the technical phrases ,after that, you have to be an engineer in the field of science and development.
-After not sound too appealing to us "grays boys"(users),almost have the impression that the overgrowth content on obtaining effect
beaver me that the guy does not refer to :"wikipedia"
I support your action that you base your knowledge on the act of practical use and therefore it is my words of appreciation. People who understand all issues do not spend time here just to earn big money,
NickZ
written
"The key unknown factor is a working feed-back"
 
system of feedback I am interested as "Nelson" wants us to direct, him where the above efficiency This large transformer is he toasting as it really is in this box, and why working on the HV system?
I would like to see a small looped system diagram?

Hi Tomtech29 ,
The technical information is need to be able understand some of events  and support with practical observation.

This the reason to i say , that are so much people losing their time because it simple don't understand some of this events not all people but most  .
We have lots of people in this forum with high formation in this area and seems that could be a problem sometimes , because this people are just formated to only see what is considered in the laws and rules .
Sometimes some "difficulty" information like that, can be translated to easy way and practical circuits made even with garbage or salvaged parts .
The question is :
Did old inventors and scientists in their time have the same conditions (materials) to do what they left in their history ? NO
This persons achieve results with low tech resources because put their work in a workshop , and nothing replace this direct observation.
So the goal is understand and apply in simple circuits and study all their aspects .
Maybe you will laughing but i spend more than 2 months to only design and study the exciter circuit and is simple , but what you observe can be trick to understand and takes time to do that . I do so much practical tests and sometimes can be frustrating because forward can  very slow .

You are right i'm not spending my time for money .  I start to work on this area when i have only 8 years because i take a shock from bemf collapse from a car relay and that trigger me to start on this area i love what i do .
I have 36 now and this is not my area of formation , i'm a unix administrator at moment unemploy
 At the moment i try to grant the conditions to make possible work on this subjects like a real work and earn my money like other job  and i think i'm closer to achive my main objective .

About you like to see a small looped system diagram , i can do that and you know that .

This is my first smaller circuit , i made about a year ago  , in that time when i put the video i will not tell what i ear by some people
https://www.youtube.com/watch?v=GmlpV1MWm40
Is not so efficient like other circuit in the feedback process but the important is the idea .
Now i need to work not only lost my time ear and writing.
good luck




 
 
 
 

 

I do so much practical tests and sometimes can be frustrated because forward can  very slow .