Author Topic: Kapanadze Cousin - DALLY FREE ENERGY (Read 11871843 times)

magpwr · « **Reply #7755 on:** January 14, 2015, 05:58:45 PM »

hi everyone,

It's past midnight here.

New findings related to this video of Ruslan-

Как это работает ?!
http://www.youtube.com/watch?v=1LhF261VDQw

12:32min scope probe negative is connected to capacitor before 25 turns bifilar.Which means the earth is likely to be connected before capacitor and not after
capacitor as per diagram.

At around 13:50 min another probe from scope is connected to nanosecond generator to obtain another waveform at around 13:57min

At 14:00min from scope time/div at 10us base on nanosecond generator "pulse width" is estimated around 2us

At 14:57min the 2us pulse is to be positioned in the top peak of 27.4xxxkhz sinewave.

Now the bad news i have no idea where the nanosecond generator output suppose to be connected.
Ruslan have once again concealed where the output of nanosecond is suppose to be connected.
This is the missing link which i having headache.

Kindly assist if anyone got sharp eyes with high contrast monitor to trace blue wire from nanosecond generator.The black wasn't used since it's common supply ground.

Acca · « **Reply #7756 on:** January 14, 2015, 09:29:05 PM »

Wow I missed that latest Ruslan video clip..

It looks like Ruslan got some bad comments and made the video private again...

Is there any one with a copy of the latest video from Ruslan ??

Acca...

Thanks ... working on the ferrite yoke spin waves I got an XRF spectrum test from different ferrite cores,

I am trying to get the right elemental combination to flux the core at a 1 Ghz. with no permanent magnetic set in it's domains..

Spin waves might be the source of the extra energy...

GeoFusion · « **Reply #7757 on:** January 14, 2015, 10:41:37 PM »

HI guyz,

Yes I have a copy of both of the videos. I can still view them on youtube

check out the schematic I posted which he drew last of the lastest vid he posted
http://overunity.com/12736/kapanadze-cousin-dally-free-energy/msg432902/#msg432902

makes alot more sense now.

magpwr,
I think you are talking about the toriod that is connected to the 3 winds and cap,
and maybe then connected to the Push pull generator system ?
I heard something about auto-resonance part, I think that is what it's for.

Don't get a headache man

, it's not so hard. there are plenty schamatics where shows how it might be connected.
I really see the only thing needed it the Highspeed mosfet driver ( TL494 or something)
Set the frequency of best results and duty cycle and then you have kacher,
and adjust and follow the resonance with the capacitors and don't forget to connect ground.

Cheerz~

Acca · « **Reply #7758 on:** January 15, 2015, 03:33:26 AM »

Thanks for the great schematic ..... and the link to latest Ruslan videos says it is still private..

Can some one reload that latest clip from Ruslan ?

Thanks !

Acca....

GeoFusion · « **Reply #7759 on:** January 15, 2015, 06:43:55 AM »

Quote from: Acca on January 15, 2015, 03:33:26 AM

Thanks for the great schematic ..... and the link to latest Ruslan videos says it is still private..

Can some one reload that latest clip from Ruslan ?

Thanks !

Acca....

Hi Acca,

These are good links for the two latest Ruslan videos.

1ste
https://www.youtube.com/watch?v=nbBbwFiSa0o

2nd
https://www.youtube.com/watch?v=QV29seAheNY

Enjoy man

Check out my new vid where I demonstrate a device that is dependent on ground for it to work
I posted a while ago and when attaching the new Ruslan schema.

Cheerz

Cheerz,

magpwr · « **Reply #7760 on:** January 15, 2015, 11:49:49 AM »

Quote from: GeoFusion on January 15, 2015, 06:43:55 AM

Hi Acca,

These are good links for the two latest Ruslan videos.

1ste
https://www.youtube.com/watch?v=nbBbwFiSa0o

2nd
https://www.youtube.com/watch?v=QV29seAheNY

Enjoy man
Check out my new vid where I demonstrate a device that is dependent on ground for it to work
I posted a while ago and when attaching the new Ruslan schema.

Cheerz

Cheerz,

hi Geo,

Thanks for putting up a back up youtube video of Ruslan video.

https://www.youtube.com/watch?v=nbBbwFiSa0o

How to obtain pulse base on 15:48min into video-------

For everyone else whom is new in this forum this the attached nanosecond generator Ruslan is using which was derived from Akula circuit.Do ignore transformer and mosfet it's merely for demo.

Previously i used low value for C3 for attached circuit 470pf to get below <500ns.
Since i know now Ruslan using around 2us pulse which is around 1/4 the period for kacher which is around 600ns for 1.xMhz.
The value for C3 should be increased to 2.2nf to obtain pulse width of 2us which will be fed to TC4420 or TC4452 mosfet driver.

Since we know he is only using pulse on positive peak of sine wave across 0.47uf capacitor.
Which means that input of attached nanosecond generator at D3 will be connected to channel A of PWM generator.

Base on attachment 7daf5eebb4dc.gif where this nanosecond generator was obtain from Akula circuit.Noticed there is "A" marked in circuit that is channel A of PWM generator for pulse to appear at positive peak.
The output of nanosecond generator was connected to base of transistor for kacher in the old setup.The old transistor driver have been replaced with TC44XX for Ruslan.

------------------

I have not tried this approach in feeding nanosecond pulse to base of kacher transistor yet.But i will later this evening since my circuit was already build with nanosecond generator with channel A or channel B selectable.

------------------

Do take note at resonance the voltage across 0.47uf capacitor would be lower sine the voltage is div by 1/2 into coil and across capacitor.

I do recall Ruslan did mention somewhere in Russian forum for tuning can use one 0.47uf capacitor but for actual setup it's 2x 0.47uf capacitor + small capacitor in parallel configuration.In order to get 1/2 resonance of 27khz which would vary depending on your DIY winding.

d3x0r · « **Reply #7761 on:** January 15, 2015, 06:49:32 PM »

wish someone with a working unit would demonstrate running without the wire through the coil... is it just cable management... or is it the target of a concentrated current....

Here's a new video about birkland (force-free) currents, which happen in interstellar scales.... They are characteristic of a thin fillament of high current with sheathes of opposing currents around them....

https://www.youtube.com/watch?v=yIFR67sckK0

At a Z-pinch is where a star is formed....

could wish to meet more theorists

John.K1 · « **Reply #7762 on:** January 15, 2015, 11:13:03 PM »

Hi Guys.

What I wanted to say- I am going through the A. Romanov movies as he shows some effects which might be the key in Ruslan's device. What surprise me is an experiment, where he connects two different coils (one by one) of different inductance's to signal generator and Amp meter. He change the frequency and check maximum reading on the AmpMeter. One coil has max a 1.8MHz and the other coil at 1.2MHz. Funny thing happens when he connected ground cable. Both coils has maximum reading at the same frequency value. Hmm

Cheers

Hoppy · « **Reply #7763 on:** January 16, 2015, 10:32:46 AM »

Quote from: GeoFusion on January 15, 2015, 06:43:55 AM

Hi Acca,

Check out my new vid where I demonstrate a device that is dependent on ground for it to work
I posted a while ago and when attaching the new Ruslan schema.

Cheerz,

Hi Geo,

As I commented in my last post, you appear to have simulated the Kapanadze lamp dimming effect on switch-on. The earth wire is clearly providing a return path back to your PC PSU. This IMO gives us an important clue to how the Kapanadze green and transparent box devices are working. We even see on your demo how when the earth is disconnected, the lamp still glows but very weakly. This again ties in with the Kapanadze devices which are reported to still work but not so well with the ground disconnected.

As I understand your setup, you have a Mazilli oscillator pulsing the primary of a TV flyback transformer, with its HV output loaded with two parallel connected bottle caps with spark gap. A circuit sketch would be helpful from you to confirm this. We now have an opportunity to discuss and determine how and with what components Kapanadze is likely to have used to scale-up this simple setup. I'm now beginning to believe that it it 'so simple, you'll laugh', well at least in principle!

NoBull · « **Reply #7764 on:** January 16, 2015, 11:12:21 AM »

@Hoppy

I don't know what you mean, but coming from you it must mean that it is important.
I wonder if Geo will provide the details that you have requested.

Once you have them (if ever) perhaps you could write a little analysis about what should be happening vs. what is happening.

Hoppy · « **Reply #7765 on:** January 16, 2015, 01:07:20 PM »

Quote from: NoBull on January 16, 2015, 11:12:21 AM

@Hoppy

I don't know what you mean, but coming from you it must mean that it is important.
I wonder if Geo will provide the details that you have requested.

Once you have them (if ever) perhaps you could write a little analysis about what should be happening vs. what is happening.

If Geo's build is as I described, then what is happening is what should happen with this simple circuit arrangement. Its important because I think Kapanadze is using the same components but with higher power ratings, albeit with some components hidden.

magpwr · « **Reply #7766 on:** January 16, 2015, 01:22:07 PM »

hi everyone,

This is my latest findings for today.

I am now able to light 220volts 5watt bulb brightly merely using kacher with "outer copper coil" over multilayer coil.

---------------------------
Previously this was my setup -

25 turns "bottom" and Multilayer coil "top" along with source negative is connected to ground with the bulb.

Multilayer bottom coil is connected to the bulb.

25 turns "top" is left unconnected in this configuration.

---------------------------------------

Latest version as shown in photo 25 turns "top" is now connected to 2000volts capacitor 0.1uf and other end of capacitor is connected to Earth."Without capacitor bulb just barely lit at 1.564Mhz"

Just take note-This may not be the actual setup base on what i am doing if we are following Akula or Ruslan with no hints.

---------------------------
Interesting thing to note at 1.7Mhz with or without the 0.1uf capacitor.There is hardly increase in current and frequency of kacher is unaffected at 1 decimal place even though bulb is brighter with cap.

tgraca · « **Reply #7767 on:** January 16, 2015, 01:46:06 PM »

It would be nice to see some COP measurements on these attempts so the real value of these experiments can be evaluated properly.
I have only done a few builds, and so far, my best build has a COP of 7%. Now, with that simple bit of information, you can tell immediately
that my efforts are not even close to anything worth sharing. If I saw 60% or better, then I would know right away that someone
(including me) is on track.

If anyone can, please help me with this one question?

Without COP measurements, how can I evaluate the true value of my efforts in these builds?

I understand the value of replicating theories and others builds only if there is some kind of specified COP. If you are getting better
than 60%, please include that information and how it was measured. Hell... if you are getting better than 7%, you are doing better than me!
lol - Thanks, - Teo

PS - with 2 grounds, 2 inductors and a transistor, I can light an LED with no input, but what I am looking for here on this thread is a way
to somehow trick the Earth into providing more power. Note that the raw power from just the 2 grounds is ~450 mV and ~3 mA. That
is my starting point. I want to somehow amplify this into usable electricity.

a.king21 · « **Reply #7768 on:** January 16, 2015, 03:36:27 PM »

Quote from: Hoppy on January 16, 2015, 10:32:46 AM

Hi Geo,

As I commented in my last post, you appear to have simulated the Kapanadze lamp dimming effect on switch-on. The earth wire is clearly providing a return path back to your PC PSU. This IMO gives us an important clue to how the Kapanadze green and transparent box devices are working. We even see on your demo how when the earth is disconnected, the lamp still glows but very weakly. This again ties in with the Kapanadze devices which are reported to still work but not so well with the ground disconnected.

As I understand your setup, you have a Mazilli oscillator pulsing the primary of a TV flyback transformer, with its HV output loaded with two parallel connected bottle caps with spark gap. A circuit sketch would be helpful from you to confirm this. We now have an opportunity to discuss and determine how and with what components Kapanadze is likely to have used to scale-up this simple setup. I'm now beginning to believe that it it 'so simple, you'll laugh', well at least in principle!

I've suspected that the ground effect is a standing wave reflection. Why not try the highest voltage of your circuit and earth it through a light bulb. It should work. lol

Void · « **Reply #7769 on:** January 16, 2015, 06:00:20 PM »

Quote from: Hoppy on January 16, 2015, 10:32:46 AM

Hi Geo,
As I commented in my last post, you appear to have simulated the Kapanadze lamp dimming effect on switch-on. The earth wire is clearly providing a return path back to your PC PSU. This IMO gives us an important clue to how the Kapanadze green and transparent box devices are working. We even see on your demo how when the earth is disconnected, the lamp still glows but very weakly. This again ties in with the Kapanadze devices which are reported to still work but not so well with the ground disconnected.
As I understand your setup, you have a Mazilli oscillator pulsing the primary of a TV flyback transformer, with its HV output loaded with two parallel connected bottle caps with spark gap. A circuit sketch would be helpful from you to confirm this. We now have an opportunity to discuss and determine how and with what components Kapanadze is likely to have used to scale-up this simple setup. I'm now beginning to believe that it it 'so simple, you'll laugh', well at least in principle!

Hi Hoppy. Unfortunately Geo showed no input voltage and input current measurements from his power supply
while connecting and disconnecting the Earth ground. There is no way to draw any conclusions at all without seeing
what is happening in regards to input power consumption. Also, it is normal for high voltage AC circuits using flyback xfmr's and
tesla coils to increase output when connecting one end of the HV output coil to Earth ground. I have seen this effect
on numerous occasions when testing with tesla coils. However, in my tests I have noticed that the input power consumption
also increases when the output increases, when connecting the Earth ground.

Geo really needs to show what happens
to the input voltage and current from his power supply when he connects the Earth ground. Also, as I have mentioned
before, if you are powering these sort of devices using a mains connected power supply, you can easily be lead down the garden path
chasing 'phantom' ground loop effects.

It is pretty much essential to do these sorts of tests using only a battery as a power source.
Not sure if Geo used a battery or a mains connected power supply.
All the best...

News:

User Menu

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY (Read 11871843 times)

magpwr

Re: Kapanadze Cousin - DALLY FREE ENERGY

Acca

Re: Kapanadze Cousin - DALLY FREE ENERGY

GeoFusion

Re: Kapanadze Cousin - DALLY FREE ENERGY

Acca

Re: Kapanadze Cousin - DALLY FREE ENERGY

GeoFusion

Re: Kapanadze Cousin - DALLY FREE ENERGY

magpwr

Re: Kapanadze Cousin - DALLY FREE ENERGY

d3x0r

Re: Kapanadze Cousin - DALLY FREE ENERGY

John.K1

Re: Kapanadze Cousin - DALLY FREE ENERGY

Hoppy

Re: Kapanadze Cousin - DALLY FREE ENERGY

NoBull

Re: Kapanadze Cousin - DALLY FREE ENERGY

Hoppy

Re: Kapanadze Cousin - DALLY FREE ENERGY

magpwr

Re: Kapanadze Cousin - DALLY FREE ENERGY

tgraca

Re: Kapanadze Cousin - DALLY FREE ENERGY

a.king21

Re: Kapanadze Cousin - DALLY FREE ENERGY

Void

Re: Kapanadze Cousin - DALLY FREE ENERGY