Author Topic: Crystal Power CeLL by John Hutchison (Read 527757 times)

sutra · « **Reply #210 on:** April 01, 2008, 10:14:16 AM »

Quote from: Feynman on March 31, 2008, 10:46:36 PM

@all

Can we convert Bis-Beta-carboxyethyl germanium sesquioxide back to free germanium?

I belive it would be possible but I think that it would be easier to just grind half a kilo of standard diodes....Ã‚Â

sutra · « **Reply #211 on:** April 01, 2008, 02:41:56 PM »

@ all

WOWW....

I've prepared some more Rochelle salt and this stuff is REALLY powerful!!!

Still liquid (wet), I applied a jolt of current of 600V and the tin I'm using as container to crystallize the salt, almost jump off the table....even with water the piezoelectric prperties are remarkable.....

Submitted to continous current (around 60V), no bubbles of any kind are developing...I can't imagine the crystallisation results...

Cool....

Ciao

sutra · « **Reply #212 on:** April 01, 2008, 02:47:23 PM »

ian middleton · « **Reply #213 on:** April 01, 2008, 05:37:30 PM »

G'day all,

@sutra: Sounds like an interesting experiment. I don't think it was piezoelectric effect though, it usually requires a ridgid crystal structure. Please let us know how your crystals turn out. Either way, looking at your picture, you've still got more hair than me.

Ian

sutra · « **Reply #214 on:** April 01, 2008, 07:07:40 PM »

Hi Ian,

well the can jumps if shocked with high voltage ( at least 4 mm), without any spray or ripple...I know that it takes a crystalline scructure to generate a piezo...anyhow the effect it is rather puzzling...I'm checking the positive elecrode and I'm sure I'll end up with metal contamination in the salt...the crystals are growing on the whole inner surface of the can instead of starting from the bottom...it could mean nothing special, since the salt could just find suitable nucleating surface on the side of the can.

cheers

P.S. yeah, in the picture you can't see my long pony tail....

sutra · « **Reply #215 on:** April 02, 2008, 02:06:51 PM »

@ ALL
Here is some of my Rochele Salt drying under the sun.

I took a crystal, melt it with heat and alowed to solidify overnight (I takes a relatively long time) and yes, it seem to be piezoelectric once hardened.

Ciao

hartiberlin · « **Reply #216 on:** April 02, 2008, 03:32:12 PM »

Hi Stephen,

The show was recorded live yesterday and is available in the archive given
the link below. Click on the "Listen!" button on the right next to the show
description.

John spoke about his never ending power cell technology.

Bill

> > -----Original Message-----
> > From: Stefan Hartmann [mailto:hartiberlin@gmx.de]
> > Sent: Sunday, March 30, 2008 4:58 PM
> > To: William Alek
> > Subject: Re: John Hutchison will be my next guest on the PROGRESSIVE
> > TECHNOLOGY HOUR!
> >
> >
> > Great news Bill,
> > will this be recorded and archieved ?
> >
> > COuld you please ask him specific questions to his crystall
> > battery cell ?
> >
> > Could you ask him,
> > if he will open source the technology or what he wants to do with it ?
> >
> > Please post the exact date of the show.
> > Many thanks.
> >
> > Regards, Stefan.
> >
> > William Alek schrieb:
>> > > Hello all,
>> > >
>> > > The famous, the one and only John Hutchison will be my next guest on the
>> > > PROGRESSIVE TECHNOLOGY HOUR:
>> > > http://www.achieveradio.com/vortex-progressive-tech/index.php
>> > >
>> > > I'm really looking forward to this interview, which will be a technical
>> > > discussion of the Hutchison Effect and more! As many of you know, John
>> > > brings to the table and awesome resume of serious
> > experimentation, exploring
>> > > space and time like NO other independent researcher I know of.
> > I generally
>> > > think of him as my ultra ego unleashed, unhinged, free to
> > explore the exotic
>> > > world of Tesla Technologies - really really cool stuff, and his
> > effects, his
>> > > discoveries are mind blowing?
>> > >
>> > > This show should be very interesting, to say the least! An hour
> > of tech-talk
>> > > with John Hutchison, and the Hutchison Effect, next on the PROGRESSIVE
>> > > TECHNOLOGY HOUR. Brought to you by Vortex Network News.
> >

AbbaRue · « **Reply #217 on:** April 03, 2008, 06:48:33 AM »

Hello all:
As I mentioned before I purchased my cream of tartar at the bulk barn for $8.80/Kg.
Well Wed. I purchase some Sodium Carbonate at Canadian Tire.
It's in the swimming pool chemical section and it's called "Aquarius pH+" it has the number 4 on it.
A 1kg container of it costs less then $3 so this stuff is dirt cheap.
1kg should last a long time because I don't think you need much to make the Rochelle salt.
Anyway I just wanted to let everyone know where to get the ingredients.
Till Later Harold.

Pirate88179 · « **Reply #218 on:** April 03, 2008, 06:51:15 AM »

@ Stefan:

Interesting radio interview...I am glad you posted the link. Thanks.

Bill

AbbaRue · « **Reply #219 on:** April 03, 2008, 07:32:43 AM »

Galena is a natural form of Lead sulfide.
How difficult would it be to make some of this stuff using lead pellets and sulfuric acid?

AbbaRue · « **Reply #220 on:** April 03, 2008, 09:54:16 AM »

@Sutra
When you disolved the cream of tartar in the water what did the liquid look like?
Did it stay milk white and thick?
I'm wondering if I got real cream of tarter. I read that a lot of places don't sell the real stuff anymore.
Where did you buy yours, and about how much did it cost?

ian middleton · « **Reply #221 on:** April 03, 2008, 01:24:25 PM »

G'day all,

After making some rochelle salt crystals, from them I made a new cell.

Ingredients:
1 teaspoon crushed iron pyrites
1 teaspoon gallium coated quartz sand
1.5 teaspoon crushed rochelle salt

outter cylinder of Aluminium and center electrode of copper.

All ingedients combined and heated in the cylinder until the salt melted.
Cell polarized with 2kV and allowed to cool for 2 hours.

Initial voltage was 0.6V but this quickly fell.
Using an AVO 8 meter set on the 0.3 mA range and a DVM, the cell held at 0.27V @0.21 mA.

I removed the AVO to take the picture and as you can see the voltage started to recover..
I also put a AA battery as a size reference.

I expect the cell voltage to peak and then fall to some stable value, I will let you know what it finishes up at.

Anyway at this stage I cannot draw any conclusions from this cell, only time and testing will tell.

Should a previous post about this cell show up , I apologise, my first one came back with an error.

Ok thats it for now, lets start getting some results in guys.

All the best

Ian

sutra · « **Reply #222 on:** April 03, 2008, 01:43:04 PM »

Quote from: AbbaRue on April 03, 2008, 09:54:16 AM

@Sutra
When you disolved the cream of tartar in the water what did the liquid look like?
Did it stay milk white and thick?
I'm wondering if I got real cream of tarter. I read that a lot of places don't sell the real stuff anymore.
Where did you buy yours, and about how much did it cost?

The solution with cream of tartar looked white, if you still have some white sludge, it is possible that you still have some free tartaric acid. Heat up the solution and add some more Sodium carbonate (you'll see the bubbling again) until the liquid becomes light-honey colour, clear and the sludge is gone...If that doesn't help, either you have an excess of sodium carbonate or you cream of tartar is not tartaric acid. filter the liquit still VERY hot otherwise crystals will form in the filter and it will end up clogged.

I bought my tartaric at ridiculously high price in the pharmacy: 3 ? /100 g

Hope to be helpful.

Cheers

sutra · « **Reply #223 on:** April 03, 2008, 01:51:13 PM »

@ Ian,

Good job.
Last night I've tryed something similar:

Mixed a 4mm crystal of Rochelle with a tea spoon tip of aluminum dust, melt with clean flame and shocked with 600 V DC. the "thing" was then pushing 0.24 V while still plastic. I left it cool overnight without any current going through...today the "splat" pushes only 12 mV but the polarization is stable...ah, the surface where I did it, is granite.....

Sorry, what's is your salt PH?

Ciao

P.S. where do you get these nice little pipes of yours?

sutra · « **Reply #224 on:** April 03, 2008, 10:05:21 PM »

@ AllÃ‚Â

Wow!

2 metallic bottle cans, mix as follows:

2gr Rochelle Salt
1 gr sand
0,5 gr Al dust
0,2 gr hematite dust
0,2 gr Graphite

heated to melt and shocked several times with 600 V...still cooling.... output 1,2 - 1,35 VÃ‚Â Ã‚Â 0,250 mA

Let's see tomorrow morning....

enjoy my pic.....

Ciao

News:

User Menu

Author Topic: Crystal Power CeLL by John Hutchison (Read 527757 times)

sutra

Re: Crystal Power CeLL by John Hutchison

sutra

Re: Crystal Power CeLL by John Hutchison

sutra

Re: Crystal Power CeLL by John Hutchison

ian middleton

Re: Crystal Power CeLL by John Hutchison

sutra

Re: Crystal Power CeLL by John Hutchison

sutra

Re: Crystal Power CeLL by John Hutchison

hartiberlin

Re: Crystal Power CeLL by John Hutchison

AbbaRue

Re: Crystal Power CeLL by John Hutchison

Pirate88179

Re: Crystal Power CeLL by John Hutchison

AbbaRue

Re: Crystal Power CeLL by John Hutchison

AbbaRue

Re: Crystal Power CeLL by John Hutchison

ian middleton

Re: Crystal Power CeLL by John Hutchison

sutra

Re: Crystal Power CeLL by John Hutchison

sutra

Re: Crystal Power CeLL by John Hutchison

sutra

Re: Crystal Power CeLL by John Hutchison