Hi All,
this thread should only be here for FAQs which have been answered by the builders
and replicators of the TPU-ECD, so this thread is locked and sticky, so only
I can post the answers from the builders.
( There is unfortunately no other way to control the posting this way, as there is
not yet any posting moderation in the forum software and I don?t want any NON-builders
to post silly questions or comments over here...!)
Read first these PDF files inside this thread:
http://www.overunity.com/index.php/topic,2383.0.htmland then continue here:
Here are the latest tips from Roberto:
Hi Stefan,
1 - I do have a 6" and a 15" ECD both at the moment OK but to be eventually reconnected to breadboard in order to do additional tests. Of course it take time. And at the moment I'm just doing it slowly (as I can work at it only from 9PM to 10PM.......lot of Office work to do) and reassembling the 'big eye' to make the film I promised you. So......it is necessary to wait for measures. I do remember you that this design is unique in the sense that power output seems only related to the percent 'opening' of the 'door'. Again....when conversion is operating the PS delivered current -> to ZERO. Of course ZERO is impossible to reach as in that case you shoul have INFINITE POWER!!
You see by yourself that probably in this case the COP is meaningless for this class of devices that should be put outside the classic theories.
2 - In the past I've used analog testers as well ...but I found the EM fields tampered them in many situation. So a solution could be to put ECD into a metal grid box in order to lessen the effects. But it take time... and I've so few. Please let the other that are only lurking or just only speaking DO SOMETHING.
3 - Me and Otto gave to all of you FOR FREE an incredible DISCLOSURE. ARE YOU SURE THAT YOU ALL ARE REALLY UNDERSTANDING HOW BIG GIFT IS IT??? - THAT'S SCIENCE FANTASY!!!!!!!! I CALL THIS DEVICE: STARGATE. IT JUST OPEN a door to ZPE I'm now confident.
ronotte
Hi Stefan,
I do assure you THAT ALL IS REAL just follow exactly the schematic I delivered in TPU=ECD and you will be 100% OK. Anyway no problem to answer you:
1 - Mobius loop is A MUST. Only 1 turn: it is a MUST.
2 - Loudspeaker cable (like Twinflex...every wire sections) is OK.
3 - The CC are transformers. Primary is winded in parallel way with Secundary. Of course as primary (optimized) wire lenght is 4.2 mt. (0.5 -1 mm diam. wire) and secundary (optimized) lenght is 9 mt (about 0.16 mm. diam. wire), it does mean that you start winding together the 2 wires, when you reach the end of the first wire (4,2 mt) you simply continue winding till the secondary wire end. Transformer width (from right side to left side) is 25.4 mm.
Please feel free to ask me for any problem. I inform you I'll put soon a FAQ page.
Good luck
Roberto
Hello Stefan,
I'm giving lot of similar infos to Jason and all is team in order to ease their replications.
1 . Transformer. This is an Otto's idea. He just optimized all to obtain best efficiency. So for the moment (!) just do so....no standard answer (bad for me too...).
2 - You can put the 'LOAD' phisically where you want. Don't think to change the schematic. Vary anything ...and it will not operate..that's a MUST. Just do it as in my doc: this work for sure as I did it with my hand.
3 - many guys think to 'adapt' the MOSFET driver circuitry. DON'T TRY. IT WON'T WORK ANY MORE. I know you don't believe, sorry but you have . I've been a digital designer during my yougtness for almost 15 years doing really research for the italian nuclar reactor control room. I DO Know what I'm saying!
Summarizing: as MOSFET's driver you can use with similar results: IRF7307BC or UCC3724 or MIC4427. If you don'make use of one of them NO-WAY to put in 'Avalanche mode' the MOSFET. I spent a week of my precious time to do all the possible way around as: CMOS driver, TT driver, high speed switching trannys, operational aplifirers, etc. NO-WAY.
This is the last time I will answer to this kind of questions. It seem to me that the guys won't believe/understand...so let them do what they want...but don't complain not obtaining my results!.
Stefan I'm in my Office so I've to leave you.
Best regards from
Roberto
P,S, yesterday night I have started tests at my reconnected 15" ECD.