Author Topic: Kapanadze Cousin - DALLY FREE ENERGY (Read 11827602 times)

Void · « **Reply #7035 on:** November 20, 2014, 07:35:00 PM »

Quote from: John.K1 on November 20, 2014, 07:07:47 PM

I can't say. It says the video not avaliable

Hi John. Basically Don Smith just talked briefly about the device that is shown in the photo.
Don said it is milliwatts in and a couple of KW out. However, Don probably meant to say
low watts in and KW out, as those HV NST transformer modules usually draw at least an
amp or two, maybe somewhat less if you have a really low power unit. It appears to be
a HV AC module such as a neon sign transformer, to a FWBR, to a HV capacitor. Then from the
HV capacitor to what looks like a thyristor or similar to pulse the capacitor through the
primary winding or a toroid transformer. It really appears to be almost identical to what
Ruslan showed in his latest video. The problem with some of Don Smith's devices is Don has said on more
than one occasion that he purposely leaves certain things out on his devices in his presentations
because of contractual obligations he had. With Don Smith's devices you are always left wondering
what he may have purposely connected up wrong or left out in his demonstration devices.

All the best...

John.K1 · « **Reply #7036 on:** November 20, 2014, 07:45:02 PM »

Ok, I have probably the same video downloaded. I did study Don Smith in my early stage

I bought even the plasma ball to replicate his device:)

Just a thought why nobody I know replicated successfully his device. I believe the main heart of the device are the caps. I think Don mentioned he has custom made caps. When I think why, I must go back to T Bearden who has a theory of use " degenerative semiconductor" -. The main point is, some caps behave the same as that material.
http://jnaudin.free.fr/html/tbfrenrg.htm

Void · « **Reply #7037 on:** November 20, 2014, 08:21:23 PM »

Quote from: John.K1 on November 20, 2014, 07:45:02 PM

Just a thought why nobody I know replicated successfully his device. I believe the main heart of the device are the caps. I think Don mentioned he has custom made caps. When I think why, I must go back to T Bearden who has a theory of use " degenerative semiconductor" -. The main point is, some caps behave the same as that material.
http://jnaudin.free.fr/html/tbfrenrg.htm

Hi John. At this point, you just never know.
All the best...

balphom · « **Reply #7038 on:** November 20, 2014, 08:52:54 PM »

am able to charge capacitors with my tesla coil to a voltage more than 1500 very easily. when i put 100w load bulb directly to the capacitors it lights to full brightness. another thing i have notice also when i put the light bulb 100w in series with ground wire it lights to full brightness this shows how much i pump into or out of the earth. i have used akula schematic to drive my tesla coil. although i had to modify them, they did not work for me the way they are drown and this makes me wonder if they are really helping us build the device or lead us astray.
if there is someone out there who can help me in drawing the output circuit after the capacitors i will really appreciate.
the circuit should be able to handle more than 2000v

Tomtech29 · « **Reply #7039 on:** November 20, 2014, 09:20:26 PM »

Hi
so this is a very good idea, like a bull's eye That would explain the presence of these capacitors

Tomtech29 · « **Reply #7040 on:** November 20, 2014, 09:23:48 PM »

I'm sorry I was wrong files

Tomtech29 · « **Reply #7041 on:** November 20, 2014, 09:33:15 PM »

on one of the material the author speaks of silent at such a high frequency diode rectifier with a high efficiency

John.K1 · « **Reply #7042 on:** November 20, 2014, 09:35:18 PM »

Guys, just wonder if you can get sterilized when running this devices

Tomtech: I think the caps you showing on the picture they are Russian paper caps. Aren't they??

Tomtech29 · « **Reply #7043 on:** November 20, 2014, 09:48:47 PM »

I would like to ask for more both details I wound toroidal transformer there a secondary 300 turns on a ferrite core in what form. And what of the primary winding?

John.K1 · « **Reply #7044 on:** November 20, 2014, 09:54:28 PM »

Tomtech29 · « **Reply #7045 on:** November 20, 2014, 10:03:31 PM »

as a warning when the fun with such a high shock is very probably for kill. going to every light bulb illuminates the full forest

starcruiser · « **Reply #7046 on:** November 20, 2014, 10:32:15 PM »

Guys, I still do not see the ground plane inside the grenade coil in your diagrams. Ruslan shows this in his video, i.e. of his hand drawn schema. I think it might be possible that he is using a capacitive arrangement which is possibly
directing the radiant energy through the grenade coil. not hard to add if you already have this built. you can use a split copper tube or perhaps a wire coil grounded on one end.

I highly suggest you try to put a ground inside the grenade coil tube opposite the radiating antenna, this would be connected to ground. the grenade coil should be ran through a full wave bridge (high freq diodes) to the
storage capacitors which then feed the inverter/chopper ckt to the transformer and then the loads.

this kind of remind me of the earlier experiments ITSU did on the coil over the capacitor tests he did.

Hoppy · « **Reply #7047 on:** November 21, 2014, 10:10:37 AM »

At 2:41 mins in latest Ruslan video.

itsu · « **Reply #7048 on:** November 21, 2014, 10:39:55 AM »

Quote from: starcruiser on November 20, 2014, 10:32:15 PM

Guys, I still do not see the ground plane inside the grenade coil in your diagrams. Ruslan shows this in his video, i.e. of his hand drawn schema. I think it might be possible that he is using a capacitive arrangement which is possibly
directing the radiant energy through the grenade coil. not hard to add if you already have this built. you can use a split copper tube or perhaps a wire coil grounded on one end.

I highly suggest you try to put a ground inside the grenade coil tube opposite the radiating antenna, this would be connected to ground. the grenade coil should be ran through a full wave bridge (high freq diodes) to the
storage capacitors which then feed the inverter/chopper ckt to the transformer and then the loads.

this kind of remind me of the earlier experiments ITSU did on the coil over the capacitor tests he did.

Hi Star,

i do not see any groundplane in this latest video, could you please show a screenshot or mention the time you see this?

I did do some tests with a Kacher with an extra slotted copper / alu pipe inserted feeding a cap/coil some years ago, but did
not notice anything extraordinary

Regards Itsu

itsu · « **Reply #7049 on:** November 21, 2014, 10:43:27 AM »

Quote from: Hoppy on November 21, 2014, 10:10:37 AM

At 2:41 mins in latest Ruslan video.

Hi Hoppy,

just a piece of loose wire i guess as he pans severall times across this while videoing the bulbs.
He must have spotted it himeself but did not worry about it.

Regards Itsu

News:

User Menu

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY (Read 11827602 times)

Void

Re: Kapanadze Cousin - DALLY FREE ENERGY

John.K1

Re: Kapanadze Cousin - DALLY FREE ENERGY

Void

Re: Kapanadze Cousin - DALLY FREE ENERGY

balphom

Re: Kapanadze Cousin - DALLY FREE ENERGY

Tomtech29

Re: Kapanadze Cousin - DALLY FREE ENERGY

Tomtech29

Re: Kapanadze Cousin - DALLY FREE ENERGY

Tomtech29

Re: Kapanadze Cousin - DALLY FREE ENERGY

John.K1

Re: Kapanadze Cousin - DALLY FREE ENERGY

Tomtech29

Re: Kapanadze Cousin - DALLY FREE ENERGY

John.K1

Re: Kapanadze Cousin - DALLY FREE ENERGY

Tomtech29

Re: Kapanadze Cousin - DALLY FREE ENERGY

starcruiser

Re: Kapanadze Cousin - DALLY FREE ENERGY

Hoppy

Re: Kapanadze Cousin - DALLY FREE ENERGY

itsu

Re: Kapanadze Cousin - DALLY FREE ENERGY

itsu

Re: Kapanadze Cousin - DALLY FREE ENERGY