Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search
« previous next »
Pages: 1 ... 266 267 268 269 270 [271] 272 273 274 275 276 ... 1586   Go Down

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11827976 times)

a.king21

  • Hero Member
  • *****
  • Posts: 1650
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4050 on: January 28, 2014, 11:32:28 PM »
Quote from: d3x0r on January 28, 2014, 09:35:11 PM
:) yes; but in applying this, I see some hope of it working


they are definately a flip-flop; one should open the instant the other closes.... thinking about getting a 12V motor and putting a wheel on it with strips of aluminum tape staggered so 2 leads short on one, as it turns, the other 2 leads short on the other... something like... forget whose it was (It was a generator with an armature that swapped between coils and capacitors)


Yes larger inductances definately reduce the switching rate (although increased resistance also); and increase the charging potential on the load.


I do want to put this together; was thinking I have some reed switchs too; could put magnets on the motor/wheel... a pulse motor with a stout flywheel doesn't require much power
Welcome to the world of the Tesla controller: Also sometimes known as the Tesla switch.
The Tesla igniter patent 1896 - 1898 and patents around that time show some good Tesla mechanical switches.
« Last Edit: January 29, 2014, 08:44:05 AM by a.king21 »
Logged

verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4051 on: January 29, 2014, 03:39:25 AM »
Sponsored links:
Logged

verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4052 on: January 29, 2014, 03:43:44 AM »
Sponsored links:

Please support overunity.com and get your
LED TV Sets , Video stuff, Gadgets and Audio Equipment Christmas Gifts over here:

LedTVforSALE.com LedTVforSALE.com LedTVforSALE.com
LedTVforSALE.com LedTVforSALE.com LedTVforSALE.com
Logged

d3x0r

  • Hero Member
  • *****
  • Posts: 1433
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4053 on: January 29, 2014, 08:00:45 AM »
Quote from: Grumage on January 28, 2014, 11:03:07 PM
Dear d3x0r.

Music, sweet music !!

Think about it for a moment ?? BIG 3 limb transformer like Stephanov !! Less resistance with bigger conductors !! This could be the start of something really great !! 

For the Tesla switch you could use pieces of Copper water pipe  slipped onto an insulating shaft and by cutting them with a triangular section create a variable "On" time. I could draw a sketch if you require ??

A.king21 and I are with this, and you 110 %  !! We thank you for doing the simulation !!  :)

Cheers Grum.
I got a relay that actually seems to have pretty good frequency response, and is DPDT...
I don't actually get current; I get some spikey things that look like it might be current... but it takes quite a voltage to actually get a current flowing in this transformer; probably too high of resistance from too thin of wire; need to try some other coils in its place; but basically I have my signal generator driving a power transistor to toggle the relay; and a constant power supply until I get anything at all working...


The one thing I didn't see in the simulator, and is clearly denoted on the schematic is the feedback loop block... but have to get some useful power out; right now all I have is the supply voltage :)


Hmm maybe I should put a switch on that too... and start with nothing... without; then the core is already saturated...
I added a 10ohm CSR and hence why I don't think I have current... wanted to see the saturation curve there to see if I was even in the ballpark....


then I found if you have too high of a resistance, then there can be no current flow, or a diminished current; the resistance needs to be just enough such that the load cap is near empty when s1 closes...


which also means if your resistance is too low, when S1 closes, the power cap (C1) will dump to ground and that's the end of that...


But then it really needs to be an impulse... but then a current doesn't really flow to cause saturation... see I'
Logged

Grumage

  • Hero Member
  • *****
  • Posts: 1113
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4054 on: January 29, 2014, 11:53:25 AM »
Dear All.

Verpies kindly PM'd the link to the inductor charging table. Here it is.

http://www.overunity.com/8411/steorn-demo-live-stream-in-dublin-december-15th-10-am/msg360397/#msg360397

Cheers Grum.
Logged

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4055 on: January 30, 2014, 11:30:04 AM »
Quote from: NickZ on January 28, 2014, 01:34:25 AM
   Guys:
   I'm still trying to replicate the original Akula device? Maybe the only person in the world, now.
   One thing that seams clear, is that Akula's inverter was providing the yoke's secondary coil wire, (red coil wire)  220v + input from his 12v to 220v inverter. Which first goes through a full bridge rectifier, and is rectified to DC 320 volts, which is then fed to the  yoke's secondary coil (red wire).
  So, the yoke secondary was getting lots of DC voltage, straight from his inverter/rectifier circuit.
This secondary red coil wire is connected at the other (second end) of the red yoke wire, to a yellow wire which leads to the mosfet driver/tuning board. This tuning board also provides the pulsed AC input, to the yoke's primary coil, which is being pulsed by possibly over 220v AC.
So, both 220+plus volts AC, and 320v DC, from the two coils mutual induction, are working together on the same yoke transformer. Which are also tuned to a resonance sweet spot, possibly using the metal AC run capacitor connected to the thick 3 turn yoke output coil's LC tank circuit. All 4 coils (three on the yoke), are working together to this point. 
   Something like this diagram (below).  I'm sure that Grum and T-1000 remember it.
   Correct or add anything you feel is overlooked or needed:


 

 
 
 

hi NickZ,

Base on your attachment have you look into the L8 little to the right where there is a straight line drawn downwards which can be a "static collector" which assist to sustain power at around 1/4 load.

I have found a very interesting link on how to make a HV\static capacitor using aluminum foil and plastic sheet.
I'm gonna use the static approach to observe if there is any notable improvement in power output/power input.

Another known method is to use the coaxial cable as a capacitor which is charged with DC 70...90volts.I think this is also where the yoke\inverter also plays a role to step up voltage.
 
http://www.instructables.com/id/How-to-make-a-simple-High-Voltage-Capacitor-for-T/

I will release a video to demonstrate this static charge and how it effect the power output\efficiency to ou perhaps.
I think got this figured out in my virtual lab inside my head.

-----------------------------
I manage to find a interesting circuit on how to superimpose high frequency onto 50HZ\60HZ source.Please refer to attachment for knowledge purpose.
110v\220volt source can be 12v sine-wave inverter  to transformer or direct if circuit is modified to superimpose high frequency on 220volts without transformer.

Or using a 555 to opto-coupler to triac or maybe mains solid state relay to safely superimpose high frequency onto 50HZ\60HZ directly from portable sine-wave inverter.
Logged

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4056 on: January 30, 2014, 11:59:16 AM »
Quote from: magpwr on January 30, 2014, 11:30:04 AM


I manage to find a interesting circuit on how to superimpose high frequency onto 50HZ\60HZ source.Please refer to attachment for knowledge purpose.
110v\220volt source can be 12v sine-wave inverter  to transformer or direct if circuit is modified to superimpose high frequency on 220volts without transformer.


This is quite possibly the principle Kapanadze is using but with Trafo TP2 as a 3-phase trafo and SCR's used instead of transistors for the HF chopping, thereby eliminating the need for TP1 & TP3. Also, a Mazillii type oscillator would probably be used to produce the HF.
Logged

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4057 on: January 30, 2014, 07:34:02 PM »
  Here is a pic of what I'm currently working on.
  I've combined the Mazilli/yoke circuit to the RMG output coils.
  Now I'm seeing some of what Geo has been mentioning, although I still don't have the right caps to tune the circuit with, or the right turn ration, for best results.
  Anyways, I'm still working on it.

  @Magpwr:
   There is no indication that Akula used an aluminum tube, or aluminum foil, or anything to reflect the HV on his big output coil on the original video, or the second one.
 There is only a reference to the inner 50 turn choke coil (tuning coil), with a small tuning cap, which is not connected directly to anything else.  But, there is NO aluminum reflector inside the air coil, as has been thought previously by some of us.

 
   Although the Mazilli oscillator circuit can draw lots of amps, that is what we need it to do. And, not just be an efficient inverter, or not so efficient one.
 This induction oscillator circuit's output also needs be able to feed back to the input, to self run, also inputting lots of current to recharge the run battery, or to run itself without a battery once started, and only needing a battery for the kick start.
 
Logged

Grumage

  • Hero Member
  • *****
  • Posts: 1113
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4058 on: January 31, 2014, 12:15:58 AM »
Dear Stefan.

Many thanks for putting OU.Com back to the way we like it. I am sure other members agree !!  :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :)

kindest regards.

Cheers Grum.
Logged

GeoFusion

  • Sr. Member
  • ****
  • Posts: 449
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4059 on: January 31, 2014, 07:28:42 AM »
Hi there guyz
how is everyone? :)

Btw I was planning to see if I can manage to replicate Akula's Toroid Device TPU.
Let's see how it works out when I start on it sooner or later hehe.

btw watch this, concerning about the Chemtrails.. incredible stuff how  this snow is different then normal ice.
http://www.youtube.com/watch?v=5tEza2wB20c

Nick:
Nice work man 8) it's starting to look like what I have at home hehe. Keep it coming.
Now you could finally see what I have mentioned befor about the amp draws in input and output.. amazing and a awesome effect right haha?

Now it's only matter of more caps and to build up a beautiful resonance with it, you could also try 24Volts input afterwards if it is not. ;) Don't forget to add one more coil of 25Turns " same direction turn  of the output coil" starting on the right side from the coil and with caps connected to it for the LC. ;)


magpwr:
hi :), thnk you for the uploading of those schematics of akula, they might help alot especially with the Superimposingfreg circuit part.

Cheerz~
Logged

verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4060 on: January 31, 2014, 07:58:47 PM »
Quote from: Grumage on January 31, 2014, 12:15:58 AM
Dear Stefan.
Many thanks for putting OU.Com back to the way we like it. I am sure other members agree !!  :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :)
kindest regards.
Cheers Grum.
I wholeheartedly agree !
Logged

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4061 on: January 31, 2014, 09:02:04 PM »
    Geo:
    Thanks for your comments.
    My current version of the ferrite filled air core has 70 turns, of secondary red coil wire. The thick outer primary coil on the air core, has ten turns. There is another coil (white wire) that is there to inductively tune the output, using the 0.33 caps, which I am still looking for, and waiting for an order. But, as I was getting much more output from the yoke,  compared to the flyback core, I'm using the yoke, again, onto the Mazilli oscillator for now.

   I've also replaced the zener diodes onto the circuit with new ones now, although only the 12v ones, as those are all I can get, so far.
  I'll test this circuit on 24v when I can get the 5 watt zener diodes.
  Right now I'm tuning the crt using just a 10v, 1.4 watt wall adapter, which does not heat anything up, or run down like my batteries do.
   It seams that tuning also requires using the right input source or battery, and having some amps behind it, as well as at least a 500 watt load, on the output.
As it's NOT the same, tuning while using a 25 watt bulb as a load, as with 5  100 watt bulbs, to maximum obtainable lumin levels.  At least it isn't for me, on this device.
   
Logged

GeoFusion

  • Sr. Member
  • ****
  • Posts: 449
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4062 on: February 01, 2014, 07:23:45 PM »
Nick:
Alright man, all cool ;)
it's all about waiting a bit and then applying :).  Here the tv yoke is to be tested on the RMG as I haven't tried it yet , great to see that it also output's good  with the circuit like this, never tried it yet with mines, but thinking it's all when you have more caps is when you will see the differences. the tuning and for output energy :).
Oh alright the white wire is the one to tune the ouput with caps, alright (= that is what I wanted to know. try also bigger values of caps as experiments.
But Keep it going with the TV yoke, It's different  ;D and looks great and might achieve great output with it.

Alright Great :), yeah 12V zenerz will do for now, I have 16V zeners and 18V. but keep trying to find higher Voltage zeners though  for further experimental progress.
niceee only with a 10V 1.4 watt Adapter  ;D, to see it only takes a bit of energy to output that all.
yes the tuning requires the right input source, as I use 12V car batteries and place them in serie for 24 or 36 volts. But the amount of  amps in input are also needed. I will upload a new video with measurements  sins I have meters now, and even to show the frequency it's giving at output and to see if it influences at input.
yes it's like giving abit more input to get more output. But it's again all about the capacitor bank that will make the difference and you will see how to balance it  :) and to see how to achieve greater output lumins too.


Logged

a.king21

  • Hero Member
  • *****
  • Posts: 1650
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4063 on: February 02, 2014, 05:05:30 PM »
As promised here's a cool circuit you can build


Gadget has commented on it as follows:
Hi. It's a modification i did to Lasersabers original circuit the crossover . I Added a Diode and cap  and yes 220 volt Led bulb..It's a nice circuit and can pull from the electrostatic / Ground potential if wire is added to your input capacitor/source leads . It's not Pocketpower+ but an interesting Circuit Never the less. Free as you can Snag from air/dirt or earth batteries.. Yes Jesus Aka Nieves Redrew It for Clarity and he Makes great Schematic Pics.i thank Ls for the original posting of the original circuit . I Modified it to create a feedback loop . If you use the right transistors and diodes and the exact bulb it will ring for days on the cap alone and if a battery is inserted it will increase in voltage with any antenna ground setup . I can't tell if its collecting radio waves or ions but the higher you go up the more power you get . It also runs sweet on a carbon rod and a Magnesium rod in dirt . I am waiting for Solar panels and will take orders for Pocketpower+ if anyone still Interested in it after i get them..  Gadget
(http://laserhacker.com/forum/index.php?action=dlattach;topic=63.0;attach=655;image)


NB the 220 pf should read 220 v
Logged

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4064 on: February 02, 2014, 05:38:18 PM »
  a.king:
  If you were to build the cross-over circuit, that Lasersaber came up with, like I did, and add the diode and small cap to that circuit, (Gadget's addition), you will find that it does not put out much power for any amount of time. It will DRAIN the run battery,  as well as also recharge that same run battery to original voltage levels, but not to the same starting amp levels. However, the light output from the bulb is minimal, and not worth the effort.
Or Gadget or Lasersaber would have kept at it and made it into a real self runner. 
  Here is a picture of my version of the cross-over circuit:
Logged
Pages: 1 ... 266 267 268 269 270 [271] 272 273 274 275 276 ... 1586   Go Up
« previous next »