FYI just added the 15 driver turns on each coil !

Please be nice im having a bad day
i dont understan the electronics i do understand his
drawing combine the transforme and spiral winds
in a ceramic you dont need to build this its already done
a car coil get a good one the ceramic minimises the frequency loss
hope this helps

this is one of my versions of the vta or what ever..
you can pulse the transformers or the aircoils..
if you decide to build it ..
...

Hi Kooler,
What are your input/ouput measurements ?

Im trying to help take what i say
and think dont take it for evidence
reverse the air battery to the zinc inside
like moray and hutchesion sonething with aluminum
and stainless he puts stainless run car
theres something up with the incandescent bulb were all missing
theres a frequency spiral put in the fillament
the energy is going thru the wire not out
some how moray backed the energy up
to go thru the wire we dont need a shit load of power we need
a injector of some sort that backs energy up
but pulses the same 60 hz forcing the
energy out the bulb this will be hard to understand
the wire fills the light with frequency
that frequency is not lost it has to be building
i think moray used his 50 bulbs
to back the energy up when you connect
one it stops the razor but energy is not stoped
its lowered working in reverse current
means thinking backwards using 50 bulbs
some how chokes the energy into the cells
now what should the cells be
well i beleive a light bulb inside granite
emits the frequecy of the bulb then the
frequency is stored in granite and then the wood
structure of the cell must have the perfect water
like air battery to stop frequency loss
he had a v on the end the iron
and then a plate of steel this must the force the
energy thru the 50 bulbs either in reverse or pulls it to the
iron out the Glass its crazy to jump a spark and not be able to power
unlimited lights tesla and moray busted this part
we havent I hope im helping if you can explain
what the vibration does I got my coils vibrating
but dont know why its important
tesla said frequency vibration and sonething else
how do you harness vibration?
Please email if you know this is pretty complicated
I know im pushing the limits of everything at once.
Till we bust this power the energy can be
manipulated to increase the amps thru one coil
i increased from .001 to 1.35
by changing wire direction thats huge but I dont know
how to harness the 1.35 amps going thru yet
the video will be up shortly hope this helps sorry its so long
 

ok after playing around with this circuit today I have had some better results.  over 600vAmp/200vRMS/vAve3.2 or so enough to drive a floro at least. After disconnecting power I noticed a rouge spike...small but there!  Is this spike due to my scope being connected or is it something else???

sorry stprue,
i was able to get back down to the foxhole the next day after i busted my nose..lol..
and i made a diagram of what i built and it wasn't nothing to do with the sweet design..
i need to go to AA i reckon.. i was toasted when i posted the other diagram..
so i am sorry for leading you in the wrong way.. below is what i was working on .. i got rid of the discharging of the cap and noticed it still had very sharp cutoffs and powered the circuit just as good with lower draw from the primany..
i switched the backwards 12 volt transformer for a flyback to get the best spark.. its wierd because the circuit really works like a radio.. first the transmitter and the receiver which is the (aircore) then goes to a 120 to 12 volt transformer back to primany..
i haven't had time to work on it because of stress due to owning my own biz and daily life..
i do think it could be scale up alot..

Can we please have some detail on the AIR-CORE.
BTW, I posted in Kapanadze thread, hope you are OK with that.

thats fine..
my thoughts on the kapanadze device is a little more different
like on the air coils .. will not be bifiliar
but over top of each other..
plus i was going to build just like a old radio but i was going to pull the frequency down on the output..
if you want the spark to be quiet then you can put a earth ground on one side of it..
you also get alot better power output but i don't like earth grounds.. if you ever put a scope on a earth battery you will see why..
it's called stealing.. hahaha

(quote)". i got rid of the discharging of the cap and noticed it still had very sharp cutoffs and powered the circuit just as good with lower draw from the primany..
i switched the backwards 12 volt transformer for a flyback to get the best spark.. its wierd because the circuit really works like a radio.. first the transmitter and the receiver which is the (aircore) then goes to a 120 to 12 volt transformer back to primany..
i haven't had time to work on it because of stress due to owning my own biz and daily life..
i do think it could be scale up alot.."(quoted from Kooler)
Hi Kooler,
I am going to replicate your great idea, but I have a few questions to ask....
1) Is it all right to use the HV coil from a stun gun for the flyback you are using in the circuit? Or is it a television flyback?
2) Please be more specific regarding the specs of the aircore coil, as the diameter, gauge and number of turns of it. thanks.
3) Can the 110:12V trafo be replaced by a homewound toroidal coil, say 12T to 150T AWG24 wound in a 2.5CM OD green toroid?
Thanks for your attention, Kooler and keep up your research!
aaron5120