Author Topic: Conspiracy smashes again an HHO succesor !!! ( sorry for the bad english ) (Read 61427 times)

chessnyt · « **Reply #75 on:** October 19, 2010, 01:29:07 AM »

Quote from: Loner on October 18, 2010, 09:06:10 AM

I am watching too! I've been waiting, but I'm very curious about electrical specs of drive ckts. I'm hoping that becomes available soon, as well.

I'll admit, knowledge from the videos, etc., has enabled me to actually start to understand how the setup I got "Lucky" with actually worked.

Thanks for the post, as it let me keep up with the new docs.

Youâ€™re welcome. Iâ€™m having a lot of fun with this build. There are many people who are replicating this hydrogen-on-demand system and scaling it up. I am only running a small 4 stroke ICE with this cell. To each his own.

Iâ€™m trying to stay on top of this project because after there have been multiple successful replications reported, suppression may set in. It is VERY important that you record all the information they are releasing as it may become unavailable later on.

TO EVERYONE WHO HAS DECIDED TO BUILD THIS MEYER-LIKE SYSTEM:
Please donâ€™t forget to report ALL successful replications so we can further document and validate this technology. There are some of us who are volunteering our personal time (for free) later on to help those who are having any difficulties.

Mark69 · « **Reply #76 on:** October 20, 2010, 01:19:31 AM »

Will there be a system that can be used to fuel a home furnace? I am following along but this tech is way over my head. Perhaps one of you guys can offer a kit with everything and instructions to put together.

Mark

chessnyt · « **Reply #77 on:** October 20, 2010, 04:32:58 AM »

Quote from: Mark69 on October 20, 2010, 01:19:31 AM

Will there be a system that can be used to fuel a home furnace? I am following along but this tech is way over my head. Perhaps one of you guys can offer a kit with everything and instructions to put together.

Mark

My quick answer to you about the furnace question is yes. A furnace, unlike an internal combustion engine, can not generate electricity unless of course you use the flame/burner to boil water and run a steam engine and divert the excess heat to a heat exchanger coupled with a circulation fan.

Minus the boiler and the steam engine, it will easily heat a home with minimal current flow thus using minimal kilowatts (very economical and cost effective energy consumption). If you are not very familiar with a Meyer-like electrolysis fuel cell, just follow this following link below to understand it a lot clearer. The following video is an example in real time (proof of concept) of how this system performs:

http://www.youtube.com/watch?v=iaAAdeqSMFE

The above video was released by the same company that powered the 2004 Dodge eight cylinder pickup truck.

Mark69 · « **Reply #78 on:** October 20, 2010, 06:29:23 AM »

Yes thanks Chessny, I didn't know it can make it own electricity as well. Then also to send the gas to the furnace and burn that from a thermostat setting; which will be able to turn it on and off. That is what I am looking to do.

Mark

ramset · « **Reply #79 on:** October 20, 2010, 06:54:47 PM »

Loner,
I don't believe the really important info on "How They Do It"

Ie, The driving circuit "fine details" has been released.
just reference to a PWM ,but nothing specific enough to reproduce .

Please if anyone has heard otherwise ,
Correct me!
thanks,

Chet

ramset · « **Reply #80 on:** October 21, 2010, 01:08:36 AM »

From Energetic today,

adam_mizer
Member Join Date: Jan 2010
Posts: 36

Freddys cell

--------------------------------------------------------------------------------
Here's a nice video Freddy made the other day, worth watching.

It appears Adam and Jim came by with a single tube set Adam is working on.
An acoustically resonant tube-set (1 pair), the MX068 PWM modified for 14.7hz, DMM connected in series to battery post reading amperage, a 4 gallon bucket of water and 2 teaspoons of KOH.

Watch it as it produces its own power after the threashold was reached then backed off PWM current!
Threshold 3 amp then back off to .025 (25milli-amp power running PWM board).

Truelly Amazing. (My jaw dropped as here is something that appears as a gift).

Last week I just had to visit Fred and his wife. Real people with heart's of gold. God bless!
I enjoyed my visit, talked, checked out the shop, helped out a little - yada yada.

YouTube - FutureEnergyConcepts's Channel

http://www.youtube.com/user/FutureEnergyConcepts#p/u/3/iaAAdeqSMFE

see post 171 and 172 over here.
http://www.energeticforum.com/renewable-energy/6235-future-energy-hydroxy-cell-6.html#post111149

chessnyt · « **Reply #81 on:** October 21, 2010, 06:18:59 AM »

Quote from: Mark69 on October 20, 2010, 06:29:23 AM

Yes thanks Chessny, I didn't know it can make it own electricity as well. Then also to send the gas to the furnace and burn that from a thermostat setting; which will be able to turn it on and off. That is what I am looking to do.

Mark

You are very welcome. It could become a self runner without an engine as long as you are able to harvest (harness) the self generated current in the water bath.

In the setup you see demonstrated in the video, there is a minute amount of current being consumed. The amperage being consumed to sustain the anomaly demonstrated is 0.025 amps.

My ultimate plans are to fuel an eight cylinder engine which will turn a generator to produce single phase 240VAC @ 60 Hz. The slight twist is when I circulate the water through the engine block, I will pass the water through an external heat exchanger instead of a typical radiator in order to use this waste heat to heat my homeâ€™s modified hot water heater. I will utilize the exhaust heat in a like manner.

Once you are generating your electricity for free, then electric heaters can be used. Who cares if they are inefficient or not. The electricity is free.

chessnyt · « **Reply #82 on:** October 21, 2010, 06:31:41 AM »

Quote from: ramset on October 21, 2010, 01:08:36 AM

From Energetic today,

adam_mizer
Member Join Date: Jan 2010
Posts: 36

Freddys cell

--------------------------------------------------------------------------------
Here's a nice video Freddy made the other day, worth watching.

It appears Adam and Jim came by with a single tube set Adam is working on.
An acoustically resonant tube-set (1 pair), the MX068 PWM modified for 14.7hz, DMM connected in series to battery post reading amperage, a 4 gallon bucket of water and 2 teaspoons of KOH.

Watch it as it produces its own power after the threashold was reached then backed off PWM current!
Threshold 3 amp then back off to .025 (25milli-amp power running PWM board).

Truelly Amazing. (My jaw dropped as here is something that appears as a gift).

Last week I just had to visit Fred and his wife. Real people with heart's of gold. God bless!
I enjoyed my visit, talked, checked out the shop, helped out a little - yada yada.

YouTube - FutureEnergyConcepts's Channel

http://www.youtube.com/user/FutureEnergyConcepts#p/u/3/iaAAdeqSMFE

see post 171 and 172 over here.
http://www.energeticforum.com/renewable-energy/6235-future-energy-hydroxy-cell-6.html#post111149

@Chet:
I posted the YouTube.com link earlier in the thread. (See reply #86)

The energetic forum link is new to me. GREAT FIND!!!!! I told everybody to save all the information as it's being released. Some of it has already disappeared according to Adam.

ramset · « **Reply #83 on:** October 21, 2010, 02:55:57 PM »

Chessnyt
The most important thing will be the PDF !

It is good you are speaking with Adam,

GET THAT PDF !!

Folks are claiming that if what Freddy is doing is true
It would be 1000 times over faraday!!

Make sure you post it here!!
Well actually a new thread with a happier heading would be nice!
Or ask Adam to !!

Thanks

Chet
PS
If you fellahs aren't watching this you should be
http://www.overunity.com/index.php?topic=7833.new

400 % ---2700% overunity
Independently varified!!
and Thane Heinz [AKA Boom Boom Cranky Pants Man Zilla]the inventer is available for help in replication!!
I must be dreamin!!
The crow bar is in more than one door!
Lets give it a pry and bust open the flood gates to the future ,
I can't stand burning up My/our Carbon reserves just to stay warm!

Mark69 · « **Reply #84 on:** October 21, 2010, 04:41:38 PM »

Chessny, that sounds like a great plan, please document every step of your progression for us. Maybe that is the safest way to go, use electric heat and use the gas in an engine. Do you think you need to have a V8 to run that generator or maybe a 4 cylinder could do that job? That way it doesn't have to be in the house and be safer. Plus, any extra electricity you can sell back to the electric company and make some coin. I like that idea.

Chet, yes so many things coming together, it is getting exciting!

Mark

mscoffman · « **Reply #85 on:** October 21, 2010, 04:59:27 PM »

Quote from: ramset on October 21, 2010, 02:55:57 PM

GET THAT PDF !!

Folks are claiming that if what Freddy is doing is true
It would be 1000 times over faraday!!

@All

This appears to be the REAL Deal. What Freddy is showing is
that the a single tuned tube has a large power efficiency dynamic
range. It still requires a low level "clock" synchronization signal which
itself then power amplifies. It highly suggestive of a self powered
reaction. Of course that would mean a very high gain at very
low input power levels. But a more reasonable gain at the power levels
we would want for an engine. It is suggestive that some sort of
acoustic reasonant system could probably be found that would
be totally self powered. We really would prefer to not have a
chemical-material-only self running system as then it would be self
running sans external controls. But...so far things are looking good.

---

@Loner

On the Maxx Tronic Max068 PWM Controller.

This was initially a DC motor controller adapted to generate HHO.
Freddy apparently modified his to run lower at 19Hz by using an LM393
circuit, most likely substitute (on a PC daughter board) for the
NE555 timer which indeed doesn't work all that well at low frequencies.
The DC motor controller part is fine as the Final FET Transistors
will need to handle inductive voltage spikes from drive coils in the
electolyzer. Apparently the MAXX Tronic circit was cloned far and
wide in the HHO community. It is not that complicated a circuit.
The electolyzer unit itself is where all the construction effort needs
to be placed. We are going to have to wait for Freddy to give the
exact details.

:S:MarkSCoffman

ramset · « **Reply #86 on:** October 21, 2010, 05:08:57 PM »

Mark S Coffman
Quote:
The electolyzer unit itself is where all the construction effort needs
to be placed.

:S:MarkSCoffman

--------------------------------------
I'm sure our buddy "Loner" can help steer that effort
[utilysing his personal experience and resourses].

Chet

teslaedison · « **Reply #87 on:** May 11, 2011, 09:37:17 PM »

Hello Guys,
That are doing a great work but I would love to put my two sense into the pot if I may because I did an experiment with just distilled water by itself with the use of Paper clip and stainless steel spoon so if you are interested in how I did it by Tesla's AC with Edison's DC working together please contact me below at bottom of this message.

PS : Here is a video showing white pure H2 and O2 white cloud gases below

http://www.fliqz.com/aspx/permalink.aspx?at=5776ccb97e4a432d923e9b4186cad72e&a=177157c753114cd4a05ac46773477d7f

Also more information below too.
You are not giving the totall account of Dr. Randell Mills processes which he says that the electrons are round shape disks when it comes to a positive proton that the electron wraps around it as a bubble so go check his explanation to what I totally believe is true web site below:
www.blacklightpower.com
http://www.youtube.com/watch?v=Ymlc8nk7Mdk

PS if you have any questions about this to please contact me at any time so I can explain his processes which will evidently become the new wave of energy for the future of all of mankind !!
Sincerely,
Thomas C.
Cell Number: 309-660-4627

News:

User Menu

Author Topic: Conspiracy smashes again an HHO succesor !!! ( sorry for the bad english ) (Read 61427 times)

chessnyt

Re: Conspiracy smashes again an HHO succesor !!! ( sorry for the bad english )

Mark69

Re: Conspiracy smashes again an HHO succesor !!! ( sorry for the bad english )

chessnyt

Re: Conspiracy smashes again an HHO succesor !!! ( sorry for the bad english )

Mark69

Re: Conspiracy smashes again an HHO succesor !!! ( sorry for the bad english )

ramset

Re: Conspiracy smashes again an HHO succesor !!! ( sorry for the bad english )

ramset

Re: Conspiracy smashes again an HHO succesor !!! ( sorry for the bad english )

chessnyt

Re: Conspiracy smashes again an HHO succesor !!! ( sorry for the bad english )

chessnyt

Re: Conspiracy smashes again an HHO succesor !!! ( sorry for the bad english )

ramset

Re: Conspiracy smashes again an HHO succesor !!! ( sorry for the bad english )

Mark69

Re: Conspiracy smashes again an HHO succesor !!! ( sorry for the bad english )

mscoffman

Re: Conspiracy smashes again an HHO succesor !!! ( sorry for the bad english )

ramset

Re: Conspiracy smashes again an HHO succesor !!! ( sorry for the bad english )

teslaedison

Re: Conspiracy smashes again an HHO succesor !!! ( sorry for the bad english )