So, let me see if I understood the difference straight.
Say we have a circuit. To the left, power source. The center has an up/down alligned inductor. The right side has the load.
Inductor responds with a kickback that is in the same direction. If current say, flows up (+) to down (-) in an inductor, kickback current will come out from the down side, continuing the initial direction, thru the load, to return to the up side.
Now we replace the inductor with a capacitor.
Capacitor discharge responds with current in the opposite direction. If current flew up (+) to down  (-), capacitor discharge would flow backwards, from the up side continuing that way towards the down thru the load.

Am I right ?

In a conductor, when a voltage difference (potential difference) is applied across its ends, it creates an electric field that exerts a force on the charge carriers. Electrons are negatively charged, so they move in the direction opposite to the conventional current flow. This movement of electrons constitutes the flow of electric current.

So, to clarify, positive charges do not actually flow in the way conventional current is described in most conductors. Instead, it's the movement of electrons (negatively charged) that creates the flow of electric current. The conventional current notation, which assumes the flow of positive charges, is a historical convention that simplifies the description of circuit behavior while not reflecting the actual movement of particles in the circuit.

Yes, you're correct. In a typical setup, the negative terminal of a voltage source (like a battery or power supply) tends to have a higher electron density compared to the positive terminal.

Electrons are negatively charged particles, and they naturally repel each other due to their like charges. When a voltage source is connected to a conductor (such as a wire), the negative terminal provides a surplus of electrons. This surplus of electrons creates an excess negative charge at the terminal, resulting in higher electron density.

Conversely, the positive terminal of the voltage source is relatively deficient in electrons, resulting in a relative lack of electron density.
When a circuit is closed (a complete loop is formed), electrons will flow from the negative terminal of the voltage source through the circuit to the positive terminal. This flow of electrons constitutes electric current, and it's this movement of electrons that powers electrical devices and performs useful work in the circuit.

The idea of positive ion flow is not that hard to understand.  I am old enough that i learned electron flow at an early age.  About 60 years ago.  To understand positive ion flow just arrange a row of marbles across a Chinese checker board with a gap in the marbles.  The marbles represent the electrons. The gap represents a positive ion. Now take the marble that is to the left of the gap.  Move it to the right into the gap.  Now where did the hole go?  As you move each marble from the left of the gap into the gap the "electrons" are moving left to right but the holes are moving right to left.  In reality only the " electrons"  are moving but it appears the positive " ions" are also moving.  The whole idea of positive ions should be restricted to chemistry and ignored in electronics.  The positive ion theory only confuses those new to electronics.


Respectfully,
Carroll

The idea of positive ion flow is not that hard to understand.  I am old enough that i learned electron flow at an early age.