Author Topic: This is HOW THE TPU WORKS!!!! (Read 14997 times)

Bruce_TPU · « **on:** April 24, 2007, 02:42:28 AM »

"I have been asked to no longer post on my own threads. The "thought police" win.

Dansway · « **Reply #1 on:** April 24, 2007, 04:00:54 AM »

Bruce,

Please post a .gif file or similar graphic format showing your idea. No MS-Word docs please!

Thanks,

~Dan

Bruce_TPU · « **Reply #2 on:** April 24, 2007, 04:09:03 AM »

Bruce_TPU · « **Reply #3 on:** April 24, 2007, 04:12:35 AM »

Dansway,

Do you understand now how it works?
HIGH freq. pulsed in opposite directions of the same coil produce a big kick at the spark gap and into the bigger wire. For some reason, this attracts many more electrons also. He then uses the magnet to turn the moving electron into current. He tells us in his clues what FREQ. to try.

bob.rennips · « **Reply #4 on:** April 24, 2007, 05:47:09 AM »

Thanks Bruce.

I think we need a further clarifying diagram or description of what wires are sparking. A spark needs to travel from one wire to another wire (obviously!). Not sure what wire ends you are talking about for the gap to jump across. This needs some voltage and current obtained from the ? frequency pulses ?

How are you applying the frequency pulse (2 wire connection) to the one wire at one end and then applying the frequency pulse to the other end of the same wire ? To me that's four pulsing wires that needs to be connected to only 2 ends of the one wire. And then there is also a spark gap on this wire ?

Bruce_TPU · « **Reply #5 on:** April 24, 2007, 05:52:40 AM »

bob.rennips · « **Reply #6 on:** April 24, 2007, 06:05:44 AM »

Quote from: btentzer on April 24, 2007, 05:52:40 AM

Bob,
Please read my FIRST post. I have Bold faced and underlined the answer to your question, under "spark gap". There is no actual "SPARK", just a gap. I call is a spark gap to help others understand.

Regards,
Bruce
"Just Experiment!"

I have obviously read you first post. Spark gap means gap across which a spark travels (whether visible to the eye or not) - if you don't mean this - don't use the term.

Sorry. Your bold face doesn't answer my questions. Much of what you attribute to Steven Marks is actually guessing by Mannix. The parable is pure Mannix who was guessing how the TPU works - it is not Steven Marks. You've mixed the two together. In fact what you highlight in bold is Mannix, I believe.

If you want people to build this you need to explain better with a better diagram what wires you believe are attached to where. You can't inject a frequency pulse into a wire (that has some current behind it) without a two wire connection to that wire or some form of inductive transfer to that wire.

All you appear to have done is explain how Mannix believes the SM device works. And given Mannix doesn't have a working device....

So I ask again, how are these wire connected ?

regards Bob

Bruce_TPU · « **Reply #7 on:** April 24, 2007, 06:16:52 AM »

turbosetch · « **Reply #8 on:** April 24, 2007, 06:38:47 AM »

We are using 1:1 audio isolation transformers to couple with the wire. Currently using audio amplifier with signal generators for a crude controller.

joe dirt · « **Reply #9 on:** April 24, 2007, 08:13:30 AM »

turbosetch · « **Reply #10 on:** April 24, 2007, 10:02:47 AM »

Well we have been playing around with this idea all night now and no real results. There is some sort of coupling showing on the scope with echos almost or delays of the initial freq injections but thats it..no kicks.

bob.rennips · « **Reply #11 on:** April 24, 2007, 06:13:11 PM »

Quote from: btentzer on April 24, 2007, 06:16:52 AM

I am sorry Bob. I have too many threads going.
Let me explain. The Bold Faced underlined is a Steve Mark quote, under the paragraph that starts off "Let's talk about Kick"
Say that you have a 5" circle of stranded wire. This give you two ends. Strip both ends. Take a FEW STRANDS from the left end and run this to your controller. Take a few STRANDS from the right end and run this to your controller. In between these two place a stripped LARGER STRANDED WIRE between but NOT touching. This LARGER STRANDED wire should wrap tightly around (perpindicular) the 5" wire. Place a PERM MAGNET facing North and South ABOVE the GAP. Fast step HIGH FREQ in the ranges mentioned in my first post, first in one direction and then in the other direction. Where they MEET is a BIG KICK. And then the electrons jump onto the larger wire, except many more of them.

Regards.

Ok, thanks. I understand how you are connecting up.

An issue you need to take into account is the speed at which the freq. will zip round the wire is phenominal. You will not be able to setup a circuit which can send a freq. in one end of the wire and then in the other end of the wire so that they meet on the wire - in the way that you describe. If you consider that transatlantic calls over underwater cables have no discernable delay, and that is a considerable distance, and then consdier the length of wire in the TPU, you'll see what I mean.

You could overcome the speed issue by having a bifilar wound coil. Sending the same signal into each and in theory they should induct each others signal. But then this is moving away from the thrust of your idea and back into the idea of deliberately creating a poorly designed transformer.

Not sure how you can solve the speed issue.

Bruce_TPU · « **Reply #12 on:** April 24, 2007, 10:03:04 PM »

tao · « **Reply #13 on:** April 24, 2007, 11:13:03 PM »

Let it be known, my below post isn't MEAN, it is just the truth...

Funny isn't it, you claim to know the secrets, yet you just re-quote SM and merely say 'just do it! then send me a working device'. You are claiming that you found the secret, lol, you only just found some of SM's words... Now you try to make it seem like you figured something out!

What don't you describe the EXACT MECHANISM OF THE OVERUNITY GAIN IN THE TPU!?!? Can you do that?

Or will you just re-quote SM again...

Another thing, you said:

"I am using 6BQ7-A TUBES for the input and phase inverter.....and so you can imagine how CRYSTAL CLEAR my HIGH FREQUENCIES are..." (p.s. You just thought he was talking about his stereo! LOL)

Do you ACTUALLY believe that we thought he was talking about his stereo?!? Are you serious?!?

Your intentions are well, but your aptitude for the TPU isn't.

In addition, in your first long post on the TPU, you are quoting all these quotes of SMs, but guess what? Many of those supposed SM quotes that are the basis of your theory, aren't even from SM!

I am bringing this all to light so that everyone reading this doesn't get excited over nothing...

turbosetch · « **Reply #14 on:** April 25, 2007, 12:33:21 AM »

TAO,
Are you trying to tell simple people like me that I am not going to get free power from this new design!! WTF...I still have not slept since the release of the data. All I have managed to do so far is make my coil sing and buzz like a bumble bee.

And to think I thought this was the answer......... :'(

News:

User Menu

Author Topic: This is HOW THE TPU WORKS!!!! (Read 14997 times)

Bruce_TPU

This is HOW THE TPU WORKS!!!!

Dansway

Re: This is HOW THE TPU WORKS!!!!

Bruce_TPU

Re: This is HOW THE TPU WORKS!!!!

Bruce_TPU

Re: This is HOW THE TPU WORKS!!!!

bob.rennips

Re: This is HOW THE TPU WORKS!!!!

Bruce_TPU

Re: This is HOW THE TPU WORKS!!!!

bob.rennips

Re: This is HOW THE TPU WORKS!!!!

Bruce_TPU

Re: This is HOW THE TPU WORKS!!!!

turbosetch

Re: This is HOW THE TPU WORKS!!!!

joe dirt

Re: This is HOW THE TPU WORKS!!!!

turbosetch

Re: This is HOW THE TPU WORKS!!!!

bob.rennips

Re: This is HOW THE TPU WORKS!!!!

Bruce_TPU

Re: This is HOW THE TPU WORKS!!!!

tao

Re: This is HOW THE TPU WORKS!!!!

turbosetch

Re: This is HOW THE TPU WORKS!!!!