Hi Tomtech. Yes, Ruslan showed a configuration similar to that in one of his videos.
I think the question to consider is whether that particular video demonstration by Ruslan can be trusted or not  
Also, there is the problem of pulsing the output capacitor with nanosecond pulses, and also whether that
was what Ruslan was even really doing or not. Some people have tried, but were not successful with that
type of arrangement as well. Something would seem to be still missing or not correct.

Hi Void
Yes you are right
 We dressed with a much "higher shelf" and probably the whole truth is at the very beginning!
- it is impossible, no one said this construction ?
- for hundreds of years... (is a sick play with Ruslan page!)
there is nothing to blindly believe such people which change all the time sentence!
how is such a thing as karma is: continue to guess

Better you wish you less nervous you'll live longer!

Hi.
I think that you should also consider the kind of operating system
- confirmation that the work can substantiate most of the structures Ruslan
1 a simple system to power Kacher
2 coil 168T. Grenade
3 voltage of 1000V. capacitors 1uF
4 interrupt nanosecond
5 construction of the transformer from 1000V step down to 12V 3 Amps.?
6 inverter high efficiency
7 the question of whether such low power that we get from the Tesla coil we are able to get convert (against the background of that was enough to Kacher and more)
- if the transformer has the current capacity???
P.s anyone thought this construction?

So how does this work ?? as soon as Trany switches on 'bang' dead transistor ! end of idea ?
or i the key to it the feed back in the transformer ?

Nick,

By definition respect is: a positive feeling of admiration or deference for a person or other entity. Why should we necessarily feel admiration for a guy that posts a video of a device that might or might not be a self-runner, whilst joking through most of it with his mate and who cannot / will not even provide a block schematic of the complete device. Of course he knows what he's got and if he really does not care if we believe its a self-runner or not, then why should he expect us to respect him?

Hi,
Hoppy , you definition of respect have a lack of conscious and is a mirror reflection of what is your formation like a person . I respect others without receive anything , this is base of my own formation and by some  people in that forum , yes because I have friends in this forum and that friends know what is receive without give nothing.
You like all time distort the subjects with your altruist manner , but for me you are nothing , and even that I respect you .
I just try to help understand that results that people search  are not able to be achieved by induction but you are not able to read underlined because you not able to understand ; you are blind by ganacious.
I stop put videos in my channel at 7 months ago when I put that video that you talk , and until that time even share to everyone some of this diagrams I never feel some respect from you or other some  few persons , and I never claim that  .
 I have my personal  and professional reasons  to chose what I able to share in present moment , and is not you that will make me loose or change anything about my decisions . you are free to block my username so do that , or you think is not enough to you ? You play and talk like you representing   others but you should talk by yourself and not by others .!
I already say that i’m not feel more clever than nowone I only work 24 hours day by day live and breath that type of research in last 3 years . I abandon my work in IT system and to work on in that theme and i need to have more than 2 jobs to survive after make that choice , and in end I see all that rewarded , but not with your contribution ...for sure .
The people that know me and I help in several parts of world sharing and help  in private  know’s that ! Inclusive in your country EUA .
So don't give me lesson s how I should act .
Is simple to you just ignore me and I will do the same nothing more  .
And what I achive if is true or not will not have more importance to you or to people that share your point of view .
Cheers

Nelson, I do not dream up word definitions!

Cheers

Your problem not mine

  Like Akula once said, "people throw dirt on it".
  Good thing he didn't give up and post nothing more about it.
 
  You want proof, then make the device, any device you choose and prove it to yourself,  or don't.
  No need to throw dirt on it. 
  If it's your project, your device,  throw all the dirt you want on it.
  But, don't run him off, just because you don't know how it's done, and believe that every devices shown is a fake.
 
  I ask for your cooperation. No need to worship anybody.  But, you could try to be more friendly, if you are looking for free hand-outs.
  What goes around,  comes around.  No need to,  to shoot, first, and ask questions later.
                                                                           

  Jeg:
  I'm also working on the same previously posted Ruslan Kacher driver circuit.
  So far, I can't get it to oscillate for me.  But, I will. I don't use the same 2sc5200 transistor, which may be why it won't oscillate.
  Geo, is using the same Kacher circuit and it looks like he IS able to obtain the amplification effect.

Nick,
if you use for you kacher a tv or monitor transistor from horizontal deflection driver as I remember you said previously it most likely won't work (oscillate)
for kacher because of its very low h_fe coefficient. Better you get one of this 2SC5200 or MJE15030.
Can you tell more precisely the code marked on your kacer transistor ?

Hi guyz

Matt,
haha yeah I know I should wear some sandals or something or be elevated from ground,
I do have a rubber/plastic chair there that would help. I really have no fear for electricity
it's only to keep in mind where dangers are and how it behaves. I might be crazy haha.
But I wanted to show this on bearfoot for the fact that radiant and HF has many characters and
how it reacts with the environment and your own body near it or direct, We should just be careful
with the streamers, they could easily burn a whole in your finger or hand.

Nick,
Yes the push-pull will be operational soon the moment I get my parts.
yeah, now you could see the shorter secondary, but right now what you saw on vid about almost no streamers is
because it was on 12V.  when connecting 24V + it will give the same amount of streaming and connecting
the Antenna increases the lenght and strength of RF arc. I could have recorded a streamer if I remembered. but that
will be in the next video, one 2x car battery to remove doubts in other terrains.
I remember seeing your video, I am curious how you have your wiring connected nick could you record this
once more? and maybe with a bit more clarity to see where everything is hooked up. it's to remove thoughts.
you should try it without the switch , and connect and disconnect the wires which are connected to where they are.
try it.

Jeg,
Thank man

Void
Thank you for your extensive reply on the subject ,
Oh yes this video will surely help alot to understand how the system behaves.
oh btw when referring to a positive or a negative on the plates, it's the charges which I am pointing at of different potential
 I do know it's not the same as how we use the terms of DC , well aware of that. Yes ground wire lenght does make a difference
after all .
Yes On the componant parts have to be fixed
for sure befor continuing.
on the part with PSU connected to mains and being bearfoot and lighting light between a metal surface and my body with ground
is what I wanted to do, to eliminate fears of ppl where to understand how radiant works, is not the same as
conventional electric mains voltage but could be very dangerous still.
 HF offcourse is the reason why I was not hurt but still it will make you think why mains did nothing to me,
In the next Video I will show how I reeinact this all by using 2x car battery 24V.
the same results will appear . I've done it befor but I think it's necessary to put on recording.
Will also do the same with my rubber isolated chair sitting on it while holding the plate one hand and other hand ground line with bulb
and same results . I will only show and tell if I my self Have witnessed it and will record if it works.
analog meters for sure, they are coming now in with an entire pakage can't wait to continue.

Tomtech
saw the link you provided me.
 I have many files on that particular setup of ruslan but I do really think it will work if
you only know how to mediate the inputs together for it to synchronize,
Btw the kacher and the secondary to ground will not work, secondary needs to connect to gate.
otherwise need another Tesla Circuit for it.
I will also try that one out sooner or later and make it work.
It's alot simpler then other setups .

Nelson,
Keep it cool man keep us updated somehow alright.
check PM

CHeerz~