Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Crystal Power CeLL by John Hutchison  (Read 523964 times)

jbignes5

  • Hero Member
  • *****
  • Posts: 1281
Re: Crystal Power CeLL by John Hutchison
« Reply #1035 on: October 31, 2011, 01:59:34 PM »
You missed the point really. Simply that it had a reading of 2 amps is the winner. How to maintain that potential is what we are here for. When I saw that video it started to level off at 1 amp and even that is very impressive. Paralleling 20 of those would make a substantial improvement of their pushing power and increase the amount that a single cell can do by lessening the load sort of. This should be the same process like we have always done. Look at the engine and how we have paralleled the cylinders for increased umph under load.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Crystal Power CeLL by John Hutchison
« Reply #1036 on: October 31, 2011, 04:19:26 PM »
   It is not usable as is.  If it were anything more than a novelty he would be working on it already, and letting us know.  He is not that interested in production, but on research instead.  I'll ask him what happened to that cell, but it worked like a low farad capacitor that did not hold up. No winner, yet.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Crystal Power CeLL by John Hutchison
« Reply #1037 on: October 31, 2011, 05:15:22 PM »
  The video of Ib2 copper/mg salt cell:
  http://www.youtube.com/watch?v=8XL2LnNRX_A
 
  As you seam to think that I've missed your point: 
  The Ib2 cell (copper/mg) lost 1/4 of its power in less than 20 seconds, so it's not showing one amp after one minute, and leveling off as you've mentioned.  Since it is an open and exposed salt electrolyte that absorbs alot of water. It is the salt and water that is allowing it work at that output, at first,  but at the expence of the metals which will be dissolve in a short time. His newer cells are sealed to avoid that, but will not produce the same current, as the more exposed salt cell will.
  Lasersaber was able to obtain 2 amps per carbon rod/ mg cell that possibly can be sustained, especially when the cell is placed in an oil bath.
That is what you might want to look into, as several of those cells can be connected together and be used for his newest project, to light 200 watts of light bulbs through his type of Joule Thief circuit.
  We are trying to work without the use of galvanics.  But without the galvanic reaction only a few mAs have been obtained, as mentioned.
That was my point... although I wish that it were not true.

jbignes5

  • Hero Member
  • *****
  • Posts: 1281
Re: Crystal Power CeLL by John Hutchison
« Reply #1038 on: October 31, 2011, 07:43:33 PM »

 The point is that he attained a higher current and yes to a slight degree it's a galvanic response. But it is still 2 amps that can be pulsed into a load! Yes it falls quickly but I think that is due to instability in it's formation. Since IB didn't reveal much about the cell we will not know will we?

ibpointless2

  • Sr. Member
  • ****
  • Posts: 370
Re: Crystal Power CeLL by John Hutchison
« Reply #1039 on: October 31, 2011, 09:59:43 PM »
Its been awhile since I posted here, mostly to due with John Hutchinson is a fake or holding something back with his crystal cells.

As for a little update from me I have a video showing the latest crystal cell. http://www.youtube.com/watch?v=XLgs7CIBVgY

The biggest problem with crystal cells is that it takes time to test the cells. What you want is a cell that doesn't corrode the metals, and so far none of my cells have done this. But they can corrode if you don't protect them from the environment and this is why I paint them.

I'm also working on new mixes of crystal cells in hopes to get more power from smaller cells. These new mixes take time to test too.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Crystal Power CeLL by John Hutchison
« Reply #1040 on: October 31, 2011, 10:29:41 PM »
  Ib2:
   Thanks for that last video, we were wondering what happened to that cell. Looks like it is still performing well, and worth developing further. Almost 1/2 an amp is impressive, as the most I've gotten out of any cell is 70mA, but that level did not last too long without dropping some.
Will that cell light an led, and can connecting more cells in parallel further increase the current? 
   I'm also wondering the same thing can be done with carbon rods instead of copper, as carbon does not rust at all.  Dipping the whole cell in resin may work good also.
  Thanks for sharing...
                               

jbignes5

  • Hero Member
  • *****
  • Posts: 1281
Re: Crystal Power CeLL by John Hutchison
« Reply #1041 on: October 31, 2011, 11:29:11 PM »
Its been awhile since I posted here, mostly to due with John Hutchinson is a fake or holding something back with his crystal cells.

As for a little update from me I have a video showing the latest crystal cell. http://www.youtube.com/watch?v=XLgs7CIBVgY

The biggest problem with crystal cells is that it takes time to test the cells. What you want is a cell that doesn't corrode the metals, and so far none of my cells have done this. But they can corrode if you don't protect them from the environment and this is why I paint them.

I'm also working on new mixes of crystal cells in hopes to get more power from smaller cells. These new mixes take time to test too.

 I am still on the fence with John H...

 Thank you tons for the update and it is indeed impressive with your results. I am about to start my own tests and would like information about your mix and process as well! IB why don't you start your own thread here then that we can collaborate again. I enjoyed working with you before and look forward to advance this process. Let me know if you start a new thread on this forum!

Clara Listensprechen

  • Newbie
  • *
  • Posts: 20
Re: Crystal Power CeLL by John Hutchison
« Reply #1042 on: February 17, 2013, 01:02:01 AM »
Looks like I'm very late to the crystal battery party. I'm just now on a quest to research this thing having been lead down this path by Google and a number of suspicious sounding claims it pointed me to on YouTube. Heard a bunch of claims and not much by way of specifics, and all in the name of keeping stuff proprietary.

Here's the thing--if it's too proprietary, nobody can prove or disprove the claims and it all sounds like snake oil.

And there are those who try to make proprietary stuff that's been in the public domain for 50 years or more.  Found a wind turbine patent claimed on a venturi, and that's like trying to patent the lever or the inclined plane.  Please.  I know that the piezoelectric effect of quartz is new to some of the kids on the block, but us old time radio folk knew about that ever since quartz was used as a transducer in record players and also know that charcoal chunks do the same dern thing.

Using epsom salts and salt substitute is a novelty, as the timeline goes, so I think I'll play with that some.  I would just like to know what type of junk that magnesium can be salvaged from. This junkyard tech wants to know. :)

I've been absent from Overunity for quite some time---my my my, all the things I missed!

stprue

  • Hero Member
  • *****
  • Posts: 1025
Re: Crystal Power CeLL by John Hutchison
« Reply #1043 on: February 18, 2013, 01:21:28 PM »
Hello CL,

Not everyone is keeping secrets on the various different types of the crystal cell technology.  Hutch, Bearden and many others have made step by step tube videos on this stuff.  You could start there.

lanenal

  • Full Member
  • ***
  • Posts: 140
Re: Crystal Power CeLL by John Hutchison
« Reply #1044 on: November 04, 2016, 03:59:49 AM »
Has anybody watched this video for making Hutchison crystal cell?

https://www.youtube.com/watch?v=gsmii6FqqdA

And here is a list of materials needed:

Salts:

1. Rochelle salt (Potassium sodium tartrate) 1 cup
2. Epsom salt (Magnesium sulfate) 2 cups

Doping agents (filed into fine dust, tiny amounts, maybe just a pinch):

1. Calcium Carbonate (CaCO3)
2. Silver Medallion (99.99% silver)
3. Iron pyrite (fool's gold)
4. Galena (lead glance -- mineral forms of lead sulphide, the magic radio receiver)

Electrodes:

1. galvanized wire/rod
2. copper tubing

note: like metals also work, but not as good.

Pretreatment of electrodes: Sodium silicate solution