Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: New Steven Mark video released April 2006 !  (Read 48609 times)

Walter Hofmann

  • Sr. Member
  • ****
  • Posts: 300
Re: New Steven Mark video released April 2006 !
« Reply #30 on: April 16, 2006, 12:35:19 PM »
hi stefan,
its me again I was to fast with the last post, can you not put the whole video on your site for downloading? I got broadband and this should take only 5 minute to download the 112mb.
thanks
walt

hartiberlin

  • Administrator
  • Hero Member
  • *****
  • Posts: 8154
    • free energy research OverUnity.com
Re: New Steven Mark video released April 2006 !
« Reply #31 on: April 16, 2006, 05:45:26 PM »
Hi Walt,
just download all the parts to your harddisk and
then rightclick onto the stevennew_split.zip and in the popup
leftclick
Extract to here
via the WinRar symbol.
Then it will extract easily.
To put up one 115 Mbytes file would make too much traffic,
cause several people would need to download it several times
due to download crashes...

I hope this helps.

hartiberlin

  • Administrator
  • Hero Member
  • *****
  • Posts: 8154
    • free energy research OverUnity.com
Re: New Steven Mark video released April 2006 !
« Reply #32 on: April 16, 2006, 05:53:52 PM »
Hi Lindsay,
what did your experiment show ?
Could you please post a scope shot for analysation ?
Many thanks.

Mannix

  • elite_member
  • Hero Member
  • ******
  • Posts: 564
Re: New Steven Mark video released April 2006 !
« Reply #33 on: April 17, 2006, 02:52:41 AM »
Stephan and all,
The experiment that i described is an easy one. I will be more specific. 1 metre of lamp wire(twinflex) wrapped with thin insulated wire..it takes about half an hour. you will get sore fingers!

Drive the thin wire with low frequency sinewave and check out the result from the lamp wire!

I would not have expected pulsed high frequency from this setup.
It is not a free energy generator!

just do it!

Arm chair analysis is will not work here and this may not even be relevant it is just something that was un usual in my limmited understanding of this. It is a simple experiment and it encourages people to be  "hands on" so if you have a cro and some basic knowledge of how to use it You could just try it!

Perhaps and just perhaps they are little kicks that could be phased.

An explanation from somebody more experienced that myself could be helpfull.

Lindsay Mannix




tishatang

  • Sr. Member
  • ****
  • Posts: 296
Re: New Steven Mark video released April 2006 !
« Reply #34 on: April 17, 2006, 09:57:45 AM »
Hi Lindsay and all,

The following link might explain what is going on with your wire experiment and possibly what Steven's device is.  Namely, a miniature tesla coil.  Standing waves are being created in the wire.

http://www.ttr.com/corum/

Tesla wanted high voltage.  But the principal should hold true using small currents and voltages.  The basic idea is that standing waves are created to magnify the voltage.  It is enferred that the magnification can be much higher than can be with just tuned circuits.  The tesla coil should be thought to resemble a tuned pipe organ or like a vibrating guitar string.  Along the wire there will be points of high voltage and noids with no voltage.  Testa said the best results are with a 1/4 effective wave length. 

Steven mentioned the physical size of the coil was important.  This would fit the description of a tesla coil.

It is interesting in the article, that the secondary of the tesla coil had a freqency of 5k different that the driving frequency.  Is this 5k a coincidence or a another indicator that this is one of  Steven's principals?

I hope this helps, I want one too!

Tishatang

Mannix

  • elite_member
  • Hero Member
  • ******
  • Posts: 564
Re: New Steven Mark video released April 2006 !
« Reply #35 on: April 18, 2006, 01:04:10 AM »
Tishatang,
Thanks for the link . I need to study this as a lot!


tishatang

  • Sr. Member
  • ****
  • Posts: 296
Re: New Steven Mark video released April 2006 !
« Reply #36 on: April 18, 2006, 09:08:34 AM »
Hi Lindsay and all,

As I reread my link, I realized it did not include the 5k difference in frequency.  I cannot find the source of this discussion, but  have referenced  some links below.  The first link shows secondary frequency differences of 5k in one original Tesla.

http://www.totse.com/en/fringe/tesla/tcad.html

http://en.wikipedia.org/wiki/Magnifying_Transmitter#Tuned_electrical_circuit

http://myweb.tiscali.co.uk/teslatutorial/MEASUREMENTS.htm

Lindsay, another possible explanation for your wire experiment is that it is a variation of a trigger coil.  As I recall from memory, its design is a transformer with its primary driving the core into satuation.  When that happens, the secondary delivers pulse waves. 
In your case the wire is the secondary and a virtual core combined.  The single wire (secondary) has its virtual core driven into saturation, thus delivering pulse waves. 

If your scope is showing high gain, maybe Steven's concept is to couple more than one of them together like gain stages of an amplifier.  Or, maybe what you have is the trigger pulse signal source into a mini Tesls coil?

Hope this helps,
Tishatang

tishatang

  • Sr. Member
  • ****
  • Posts: 296
Re: New Steven Mark video released April 2006 !
« Reply #37 on: April 18, 2006, 11:29:18 AM »
Hi Lindsay and all,

Here is a link to simple experiment about Hertz discovery.  A short PDF file that explains the origin of the different beating freq of the Tesla Coil.

http://arxiv.org/pdf/physics/0602073

Tishatang

orionjf

  • Newbie
  • *
  • Posts: 31
Re: New Steven Mark video released April 2006 !
« Reply #38 on: April 18, 2006, 10:03:03 PM »
Tishatang
I think your explanation (using magamps, magnetic amplifiers) has sense.
Even more, think about cockroft multiplier. There are some analogies:
- AC input and DC output
- Cockroft multiplies voltage input, SM multiplies flux input
- Inductances vs. capacitors, and magamps vs diodes
Maybe ...

Earl

  • TPU-Elite
  • Sr. Member
  • *******
  • Posts: 435
New SM video_April 2006
« Reply #39 on: April 19, 2006, 10:18:06 PM »
Hi Steven, Lindsay, et all,

Steven, did you ever give a demo of your device with start-up power provided by a solar panel?

In the large device, do the 2 small toroids together with the 2 cylindrical capacitors form two resonant circuits, at two different and unique frequencies?

Are these two L/C circuits part of two free-swinging [power ?] oscillators?

Does the DC output, with residual RF component, result from some type of rectification of high frequency energy?

Do the two electrolytic capacitors serve as DC output filtering C's?
Are there several smaller ceramic capacitors in parallel with the electrolytic capacitors to give better by-passing at higher frequencies?

Apparently the electrolytics are not absolutely necessary, since they don't appear in the smaller devices.

Some of the videos show two flat, round plates with a certain separation distance.
Are these plates (a good portion of which are air) made of a magnetic metal, such
as steel or iron or transformer laminations?
Are they made of non-magnetic metal, such as aluminium?
From non-metallic material such as plastic or fiberglass?

The lower plate appears to have a coil with few turns.  Am I correct to assume that there are two other coils, all three with a 120 degree spacing?  Is energy put into these 3 coils in order to create a rotating magnetic field?

Best regards, Earl

opat

  • Newbie
  • *
  • Posts: 2
Re: New Steven Mark video released April 2006 !
« Reply #40 on: April 19, 2006, 10:30:18 PM »
Please help me to watch video . I 'm download video after complete all file and double click on file  stevennew_split.zip and extract stevenew.avi to harddisk but winzip say "please insert disk number 1 , the diskette is labeled ELECTRONICS ,  I don't know why someone in this forum advice rename first file stevennew_split.zip to stevennew_split.z00 or use winrar to open i'm try all but can't help.

rensseak

  • Sr. Member
  • ****
  • Posts: 330
Re: New Steven Mark video released April 2006 !
« Reply #41 on: April 19, 2006, 10:58:24 PM »
Please help me to watch video . I 'm download video after complete all file and double click on file  stevennew_split.zip and extract stevenew.avi to harddisk but winzip say "please insert disk number 1 , the diskette is labeled ELECTRONICS ,  I don't know why someone in this forum advice rename first file stevennew_split.zip to stevennew_split.z00 or use winrar to open i'm try all but can't help.

you shoud copy all files to the same directory then rename *.zip  to *.z00, open this file with winrar or winzip and extract it. that is all.
else you try it with the newest version of winzip or winrar.

opat

  • Newbie
  • *
  • Posts: 2
Re: New Steven Mark video released April 2006 !
« Reply #42 on: April 19, 2006, 11:56:49 PM »
I
Quote
you shoud copy all files to the same directory then rename *.zip  to *.z00, open this file with winrar or winzip and extract it. that is all.
else you try it with the newest version of winzip or winrar.

Thankyou "rensseak"  for your advice I 'm new install winzip10 and rename that file now can see movie.
 
Thankyou again 

Earl

  • TPU-Elite
  • Sr. Member
  • *******
  • Posts: 435
Two toroid coils and capacitor
« Reply #43 on: April 20, 2006, 11:50:37 AM »
Hi Steven, Lindsay, et all,

I have taken another look at the large device video, and it now seems to me that the two toroid coils and two capacitors are an optional power output filter.  I say optional since the small devices do not have them. However, it would still be correct engineering practice to include such filtering, and in fact enclose the entire device in a metal box with the output leads passing through feedthrough Pi-Filters.  This would keep the environment free of any radiated RF.  Eventually one could use a steel box in order to shield the RF magnetic-field components.

The toroids look like standard EMC common-mode line chokes.  One of them has a clearly seen insulation strip in the interior hole and there are two separate windings.  The two capacitors are probably what are called AC X-capacitors and would be located on the load side.

These would work as very effective low-pass filters, removing RF from the output.

Steven, are the two toroids and two capacitors a line filter - or - oscillator tank circuits?

Steven, have you tried enclosing the devices in a non-magnetic metallic box?  A ferric metal box?
Do they still work in such Faraday cages?  Are there still inertial effects?

Best regards, Earl

Freedomfuel

  • Full Member
  • ***
  • Posts: 105
Re: New Steven Mark video released April 2006 !
« Reply #44 on: April 21, 2006, 07:39:25 PM »
I think that everyone is getting too hung up on details of hardware based on some fuzzy videos and stills.  For instance Earl wants to know what kind of capacitors are used in the 1.5kW coil and someone else wrote about Litz wire.  In my opinion attempts to copy the Mark device based on such scanty information that we have is futile without a good understanding of the basic physical principles involved.  For that we need to educate ourselves about how the Earth receives energy from the Sun and in what way the Earth?s magnetic field is involved.  It cannot be anything as straight forward as cutting lines of flux, changing or collapsing magnetic fields otherwise we would all have these devices whirling away in our lofts by now.  Governments have been able to suppress this for sixty years because it depends on phenomenon that are in contradiction with current scientific teachings and military researchers discovered it first.  Nethertheless, don?t despise what the textbooks tell you about the geomagnetic field because there are important clues in sources like Wikipedia and the Encyclopedia Brittanica.  For example here is a quotation from the latter:

?At a distance of about 60,000 kilometres outwards towards the Sun, the pressure of the solar wind is balanced by the geomagnetic field.  This serves an obstacle to the solar wind, and the plasma is deflected around the Earth by the resulting bow shock.  The magnetsphere so produced streams out into an elongated magnetotail that stretches several million kilometres downstream from the Earth away from the Sun.  The magnetotail can store an enormous amount of energy ? several billion megajoules ? for hours.  This occurs through a process called reconnection, in which the interplanetary magnetic field, carried by the solar wind, becomes linked with the magnetic field in the Earth?s magnetosphere.  The energy is released in dynamic structural reconfigurations of the magnetosphere called geomagnetic substorms, which often result in the precipitation of energetic particles into the ionosphere, giving rise to flourescing auroral displays.?

This may not be the answer we are looking for but it could provide clues we need.  In my opinion the true answer is provided at this site:  www.magneticenergy.co.uk .  Based on their analysis I hypothesis that solar photons are trapped by the geomagnetic field in the ionosphere and exist as ?source free magnetic fields? or magnetic particles.  This is where free energy comes from in my opinion.

With this kind of understanding we can build our own energy coils based on first principles just as we would build a radio transmitter. 


Wikipedia key words:  Reconnection, magnetosphere, aurora, solar wind, ionosphere

« Last Edit: April 21, 2006, 08:16:02 PM by Freedomfuel »