Author Topic: Hilden-Brand Magnet Motor (Read 302885 times)

dingbat · « **Reply #450 on:** February 27, 2007, 02:29:20 PM »

Quote

I have only one thing to say currently. Everybody is bitching about high gas , high energy, high heating, high everything, however no body is will to put a few bucks out to help the situation.

If I can come and take measurements on your motor(s), and my measurements validate your claims, I will help you complete your projects.

JackH · « **Reply #451 on:** February 28, 2007, 03:42:40 AM »

Hello Honk

Ergo · « **Reply #452 on:** February 28, 2007, 08:57:06 AM »

Quote from: JackH on March 11, 2006, 05:58:55 AM

However since these pictures were posted I have made several major break throughs.
I have found out that the valve that I invented werks much better at a low rpm.
I have built a motor that was especially built to operate at around 600 rpms.
This new motor has been tested on a prony brake and the voltage/current was
monitored. Input was 2.2 watts and the output was over 56 watts.
At a pull down of around 200 rpm this motor exhibited over 500% efficiency.
I think that means it to be over 400% over unity.
More will be posted about this motor in the future.

Quote from: JackH on June 19, 2006, 03:46:56 AM

I have built a two inch rare earth magnet model (two valve, two rotor) of my
invention that has proven to produce over %500 efficiency.

Quote from: JackH on September 06, 2006, 03:44:13 AM

I had an electrical engineer from Goodyear Atomic come up to run some tests on the
last motor I built, this motor was only at two thirds built. In other words it only had
two rotors/valves, a complete motor will have three rotors/valves.
His tests showed it running at around 300% efficiency or better.

Quote from: JackH on February 16, 2007, 02:37:46 AM

The two inch motor I had tested was just a two valve motor, it had some coast time.
However it still tested out to be two times overunity, with a third valve, I'm sure it
would have done much better.

Quote from: JackH on February 23, 2007, 02:27:30 AM

I have a motor that has proven to produce twice out than in.

Quote from: JackH on February 28, 2007, 03:42:40 AM

Some of the motor that I have kept are not really over unity because they are
running at high RPM levels.
The five valve radial motor was tested at about 100% efficiency, however it has
very little power because it runs at high RPM.By the way if I had a motor that was
five times overunity, would you think I would need your help then. I don't think so.

What is going on with you Jack? Are you trying to shit us?
All of your reports on your earlier motors stated overunity
from 120% to 400%. This was also the high RPM versions.
And now you are saying that you don't have any overunity motors?
Why do you keep being inconsistent in your story?
If you have any low RPM motor capable of overunity, then let
dingbat for gods sake test it and let him help you out.
He's willing to help you complete your projects if your statements are correct.
This means money, and that's exactly what you want from people.

Well Jack, I'd like to ask you one thing only.
Have you ever had any motor capable of overunity?

dingbat · « **Reply #453 on:** February 28, 2007, 01:19:08 PM »

Jack,

Thanks for the response.

Dingbat

idnick · « **Reply #454 on:** February 28, 2007, 05:04:43 PM »

Hi Jack

Quote from: JackH on Today at 02:42:40 AM

"Some of the motor that I have kept are not really over unity" because they are
running at high RPM levels

Why in hell would you keep the under unity motors but not the OU motors ??

Scrap em !!!

What did you do with the over unity motors??

Like this one:"I had an electrical engineer from Goodyear Atomic come up to run some tests on the
last motor I built, this motor was only at two thirds built. In other words it only had
two rotors/valves, a complete motor will have three rotors/valves.
His tests showed it running at around 300% efficiency or better.

I think I'm gonna have another Hamm's and think this over and if I can't figure this out before I finish the first Hamm's, I'm gonna have another and another till I do.

Dave

Hamm's the beer refreshing !!!

Paul-R · « **Reply #455 on:** February 28, 2007, 05:36:22 PM »

Quote from: JackH on February 27, 2007, 04:22:52 AM

You can take a one inch magnet that is two inches long and cut a half in of of it . The half in pice will be just as strong as the longer pice. However the surface area of a magnet north/south pole when increased or decreased makes alot of difference. The length however long makes no difference of how strong the magnet is. Only the serface area of the north/south pole makes a difference.
Later,,,,,,JacKH

But is it not true that a longer magnet will throw its field much further
out than a shorter one? This may have an important effect on performance.
Paul.

acp · « **Reply #456 on:** February 28, 2007, 05:41:30 PM »

Unfortunately, there do seem to be some inconsistencies in Jack's posts. I was rather hoping that he had something special, but I'm tending towards the incredulous at the moment....

Honk · « **Reply #457 on:** February 28, 2007, 06:55:17 PM »

I sure hope Jack wants to explain his strange and ever changing story.
The last couple of weeks Iv'e have been working on a Hilden Brand motor myself but
it seems like I'm wasting my time if Jack's reports on overunity is false.

Jack! Please explain this strange and sudden change in your reports? What's the truth?

JackH · « **Reply #458 on:** March 01, 2007, 03:57:46 AM »

JackH

allcanadian · « **Reply #459 on:** March 01, 2007, 04:36:47 AM »

Hey Jack that's a bad attitude, if there's one thing I have learned here is 80% of the people are mainstream and will probably do nothing of any importance, they have opinions which they consider fact, despite the facts, they don't do experiments there above that. They love to coax people on and if ,like you say they don't get all the info they want then they attack!
It just goes on and on in every thread, don't get discouraged, you can be sure just as many people like me are here to listen and help.

Honk · « **Reply #460 on:** March 01, 2007, 12:04:15 PM »

Hello Jack.

I'm sorry to read that you feel offended by people . But when you don't explain your
actions to people they tend to get you all wrong. Especially when they can't understand why your story was changing. Don't get to upset. Just take it easy and
please take Dingbats offer to help you out with your project.
He can probably buy you the magnets, and Ironhead at this forum is willing to give
you the copper wire that you need for free. Please contact them and take their offer.

I will continue to build a Hilden brand motor myself, just to see if there is a possiblility
of getting over unity. The motor is not that expensive to build for me, just $500.
I'll post the results here (if the thread remains) later this year.

/Honk

FredWalter · « **Reply #461 on:** March 01, 2007, 06:48:30 PM »

Quote from: allcanadian on March 01, 2007, 04:36:47 AM

you can be sure just as many people like me are here to listen and help.

It is pretty clear that what Jack wants is money, to pay off his latest patent lawyer bill, and to pay for parts, and to pay to keep the electricity hooked up to his shop, and to pay for various other things.

So unless you have a big wad of cash to donate his way, I believe that he doesn't consider you to be helping.

Topguner2 · « **Reply #462 on:** March 01, 2007, 06:52:28 PM »

Quote from: JackH on March 01, 2007, 03:57:46 AM

Hello Honk,

Yes you are probably doing something stupid Honk, trying to build one of my motors. Well when you are pore you need parts from one motor to the next. Currently I have no motors that are overunity. The two in motor that I had tested two times over unity. I had to tear it apart to get the magnets out of it to build a generator.

You know what, I could really give a shit if you all beleive me or not. You all are just a bunch of want something for nothing assholes.

This is my lat post, I give up on all you assholes.

Later,,,,,JackH

Stefan HartMann
PS: you can take my name totally out this stupid message board, I give up.
Could you also if possable remove the Hilden-Brand Magnet Motor Forum.

Who is the a**hole here? People have offered to help you but you rudely turn them down. The only form of help you seem to want is cash. Please tell us exactly how much you need so we can all pool our hard earned money together and give it to you. we don't really need any proof that you have anything because we are all rich and have plenty of money to piss away.

ResinRat2 · « **Reply #463 on:** March 01, 2007, 08:07:08 PM »

Thread started: March 11, 2006

Thread died: March 1, 2007

Almost made it one year.

Accomplishments:

All that anyone really asked for is independently verified proof. Is that such a crime?

Apparently so.

idnick · « **Reply #464 on:** March 01, 2007, 08:16:20 PM »

Quote from: Topguner2
we are all rich and have plenty of money to piss away.
[/quote

Wow!!! we are all rich and have plenty of money to piss away. Wish this was true, but in my case,

News:

User Menu