@otto

can you post schematic ? I'm not good in electronics and cannot visualise this circuit.

Seems that I have something opposite , I have car coil connected between Drain and plus of the battery

@otto

This is my schematic.Transorb is 1.5KE300CA bidirectional transient high current diode,varistor afaik is 400V rated.
Generator is not shown (but here is the schematic http://s194.photobucket.com/albums/z209/boguslawb/car%20ignition%20coil%20experiments/?action=view&current=cewka.jpg) 2200uF/25V  electrolytic cap is placed in separate board with mosfet,varistor and transorb, directly connected to car battery while oscillator is connected later to that circuit board by 3 tiny wires.
Resonant frequency is around 54hZ (coil primary is 3.88mH) but secondary can add to it IMO.
Anyway, oscillator is producing around 120-140hz maybe it's second harmonic of resonant LC circuit.
I don't want to patent it (and nobody can - because I'm here publicly presented the circuit ) :-) I just want to improve it, because now electrostatic effects seems to flow over all circuit wires and I'd like to place additional mosfet to concentrate radiant effects only on secondary of coil.Of course higher energy and higher frequency is needed too !

It looks to me as parallel LC circuit which can be improved. The idea is to "push the swing" at correct moments to accumulate energy in parallel resonant circuit during on time of mosfet (mostly in coil working in that part of cycle on short-circuit mode) while during off time to let "natural swing".I think it is the equivalent of Tesla patents with large self-induction, but for parallel resonant LC circuit. Here the same coil is high self-induction storage and path of discharge.

Of course it is only my theory but something really happen here if you power it at harmonic of resonant frequency.

I think I couldn't  be more clear !

My knowledge is very limited but I know that at resonance parallel LC circuit has almost infinite impedance.Doesn't it mean that is looks like an open circuit to the power supply and no power should flow to that circuit ? So HOW it SEEMS to ACCUMULATE power when power source is connected at higher harmonic make&break rate to it ?!

This is WHAT I WANT TO ASK EVERY EE on THIS board !!!

"Doesn't it mean that is looks like an open circuit to the power supply and no power should flow to that circuit ? "

Correct in AC circuits this is called power factor Zero. In RF we can say we have infinite VSWR. In conventional electronics believed we are achieving nothing but nothing can be further from the truth:)

AS RE = RF where we take Power Factor 0 as a total loss is converted to GAIN.

My knowledge is very limited but I know that at resonance parallel LC circuit has almost infinite impedance.Doesn't it mean that is looks like an open circuit to the power supply and no power should flow to that circuit ? So HOW it SEEMS to ACCUMULATE power when power source is connected at higher harmonic make&break rate to it ?!

This is WHAT I WANT TO ASK EVERY EE on THIS board !!!

Hello all,

@forest

the picture is posted in the forgotten thread "Steven Marls secret" page 1.

After almost 40 years in electronics I can also say that Im NOT good in electronics.

99% of the people are connecting their MOSFETs like you did but I never saw something "special" when I had my MOSFETs connected in this way.

In my setup works the IRF 840 and the IRFP 450 because they have the capacitance at the OFF time at around 300pF or so.

@wattsup

tis IS what Im doing. I have 2 TPUs:

a 6" open TPU
and a 6" TPU with a HV coil sitting on top of the TPU with a silver ring....

thanks for the dimensions of that silver ring!

Im working with vibrations because I see that such vibrations are doing a fine job. My oscilators are not good so Im surching for a solution to pulse my coils without oscillators or at least with oscillators that can easily be builded so the people can rebuild them.

You think Im on a wrong path. Hmmm...a little collapse from a 470pF cap is amplified to such a collapse that it fires a coil very high into the air.

Now imagine a lot of such collapses at 2 or 3 different input frequencies.

Or to say it in another way:

this vibrations are kicks. As I have my MOSFETs connected in another, better way, the kicks - vibrations are negative.

My oscillators are only charging and discharging a tiny cap and they are fired into my coils. Nothing more.

Is this a wrong way to build a TPU? I dont think so.

Otto

Its a Trick Light bulb . make your own glass bulb here http://www.metacafe.com/watch/975794/mysterious_lightbulb_hack/

and here http://www.wonderhowto.com/how-to/video/how-to-make-a-magic-lightbulb-271313/
Trick your friends into thinking you got a coil that lights up a bulb with a coil of wire to make contact . Also you can put warm leds in them to make them produce real golden light unlike the one in the video that produces a blue light . As far as multimeter measurements , a Polaroid flat battery and a tiny jt  taped up with the wire and a either a reed switch to trigger it on or a mercury switch . flip it . .
theres even one that looks real and lights up and explodes like theres too much power http://www.youtube.com/watch?v=Df5jx9UUGrE&feature=player_embedded

and as far as all the fancy electronics  you can get 128 volts from a 1 volt Jt and a transistor .
you can also buy them on Ebay 
Gadget

Its a Trick Light bulb . make your own glass bulb here http://www.metacafe.com/watch/975794/mysterious_lightbulb_hack/

and here http://www.wonderhowto.com/how-to/video/how-to-make-a-magic-lightbulb-271313/
Trick your friends into thing you got a coil that lights up a bulb with a coil of wire to make contact . Also you can put warm leds in them to make them produce real golden light unlike the one in the video that produces a blue light . As far as multimeter measurements , a Polaroid flat battery and a tiny jt  taped up with the wire and a either a reed switch to trigger it on or a mercury switch . flip it . .
theres even one that looks real and lights up and explodes like theres too much power http://www.youtube.com/watch?v=Df5jx9UUGrE&feature=player_embedded

and as far as all the fancy electronics  you can get 128 volts from a 1 volt Jt and a transistor .
you can also buy them on Ebay 
Gadget

This is a great find Gadget.  This is probably how they did it.

Hi everyone gooday 

in most of tesla's work i notice that he only used motors to switch on and off and walla high voltage and high currents are produced. amazing isn't it. 

the simplicity of his works makes him great !

WOW !!!.

including the antenna in the tpu makes produce an input source to a circuit. wow really amazing!

its like a recursion in  c programming repowering itself.

from little caps into big caps discharging in a coil.

little kicks into big kicks. 

update in my current tpu:
i'm using ozone patent circuit in my tpu, you know what? its amazing.

Tesla didn't have transistors to work with and he didn't like tubes. He also used spark gaps for switching.

If you read the ozone patent, you will notice that he states it can be used to create free energy. Ozone + steam = H2O2 which is rocket fuel (hydrogen peroxide)

Stan Meyer made ozone in his air gas processor and Dr. Puhirich also used this method.

H2O2 has a higher viscosity than water and the bonds cleave much easier than water. This is why Meyer called it hydrogen fracturing and Puharich called it molecular shattering.

If you watch the Puharich videos on youtube, you will note that Puharich stated that he changes the molecular bond angle of water from 104.5 degrees to 109.28 degrees from center of mass. That is the bond angle of hydrogen peroxide.

Bond angle of H2O2 - This info. is difficult to find.
http://www.washburn.edu/faculty/sangel/Courses/CH121/Recitation6ans.pdf

http://wiki.answers.com/Q/What_is_h2o2%27s_bond_angle

This might hold the clue as to why Meyer stated he was using red laser LEDS in his ozone generator:
http://oai.dtic.mil/oai/oai?verb=getRecord&metadataPrefix=html&identifier=AD0263364

There are over 10,000 ozone generators patented.
http://www.valdosta.edu/~tmanning/research/ozone/

Puharich also stated in his videos that he was not going to get into the complex aspects of the ceramic in his injector. That is because it was piezo electric and the ceramic probably contained silver which is a catalyst that cleaves off the extra oxygen atom.

Both NASA and the Russians use this to boost space junk. That might explain why Meyer filed an affidavit in the international test report stating that he didn't get information from NASA.

A laser ozone generator (Meyer's air gas processor) is the most efficient method to produce ozone. Meyer's microwave steam generator is the most efficient method to produce steam.

Meyer described the water going to the injector as "ordinary processed water"

The "high frequency / high voltage burst pulse"  going to the injector both ran the piezo to fracture the bonds and polarize the gasses and detonate the gas.

To make a resonant cavity to combine the ozone and steam, a round ball shape is most efficient as it is isotropic meaning it radiates in all directions equally. Tesla stated that starting with the round tank, all things become possible. The WITTS ultrasonic water heater is another example of an isotropic storage probe producing overunity. Talk to a metal spinner about getting the tank fabricated, they probably have the bell shape mold sitting on the shelf already and it only takes them 1 hour to make the two halves.

Tesla was one of the brightest people that ever lived.