Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: IST'S FURNACE FAN PULSE MOTOR SELF RUNNING NO INPUT BATTERY  (Read 26088 times)

innovation_station

  • Hero Member
  • *****
  • Posts: 5134
IST'S FURNACE FAN PULSE MOTOR SELF RUNNING NO INPUT BATTERY
« on: September 04, 2009, 02:53:09 PM »
FIND 1 OF THEASE ...

almost all the parts required to build a nice unit are in a furnace fan ..

ill add pics as i build it ...

i took the fan apart last night ...

i expect this to be EXTREAMLLY SIMPLE ...

THIS UNIT GETS ITS ENGERY TO RUN FROM THE PUSH YOU YOURSELF INPUT UPON START UP

WHEN YOU SET IT INTO MOTION IT WILL GENERATE ENGERY ... THIS ENGERY WILL BE USED TO ACCELERATE THE UNIT ...  ;)

IST!

innovation_station

  • Hero Member
  • *****
  • Posts: 5134
Re: IST'S FURNACE FAN PULSE MOTOR SELF RUNNING NO INPUT BATTERY
« Reply #1 on: September 04, 2009, 03:54:44 PM »
here is a pic of the fan i will transform ...

i will have to build the rest of the unit but this is a good starting point ..

ist!

innovation_station

  • Hero Member
  • *****
  • Posts: 5134
Re: IST'S FURNACE FAN PULSE MOTOR SELF RUNNING NO INPUT BATTERY
« Reply #2 on: September 04, 2009, 04:41:09 PM »
for the rotor i will use ply wood as im all out of plastic ...

and the big peice i do still have is for yet another pulse motor

i will also add 2 10lb cast iron bell bar weights for some torque ...

i will use 1 of my old water turbine units for the weights ..

this can be adjusted easly for more torque ..  simply by adding more weight ..

i may install a stall clutch .. on 1 end of the shaft .. if i do i will want to have enough mass spinning at a good speed b4 the clutch engages ..

and i may run a 12vdc altonator off the clutch ... now that taps mechanical from 1 end of the unit i will also tap mechanical from an old cordless drill motor and a pully sys and a belt off the other end .. just to insure it self starts .. also i will only power 1 motor coil for now ..

and i will on the pulse motor wheel have some collection self run generator coils to charge the big cap that will power the pulse coil .. also there will be a generator wheel .. on the pulse motor ..

but i will start simple for now ...

 ;D

ist!

1 peice at a time it wont cost cash a dime ...  ;)

innovation_station

  • Hero Member
  • *****
  • Posts: 5134
Re: IST'S FURNACE FAN PULSE MOTOR SELF RUNNING NO INPUT BATTERY
« Reply #3 on: September 05, 2009, 05:39:25 AM »
OOOO GOODIE ...

I WAS GIVEN ALL THE BIG OLD WIRE SPOOLS I WANT FOR FREE ..

IM A GOING SHOPPING TOMMOROW ...  ;D

NO DIMES!!! :D

THE BIGGEST SPOOLS I CAN GET ARE ALMOST 8' TALL  :o :o :o :o

YIKES ...

just imagine the torque .. on that puppy ... 8)

now i need about 100 more microwaves for all the darn magnets ...

lol  ;)

ist!

pics tommorow ..

there many sizes of spools ..

might even score some big coax!!!

so if all goes well i wont even have to make the wheels ...  ;D

i will add some pics of the drill i will use as a generator .. and what ever else i will need to compleat this unit ...

therealrasta

  • Full Member
  • ***
  • Posts: 249
Re: IST'S FURNACE FAN PULSE MOTOR SELF RUNNING NO INPUT BATTERY
« Reply #4 on: September 05, 2009, 08:21:12 PM »
I am following your idea somewhat.. Need to see and hear more to understand this concept.

innovation_station

  • Hero Member
  • *****
  • Posts: 5134
Re: IST'S FURNACE FAN PULSE MOTOR SELF RUNNING NO INPUT BATTERY
« Reply #5 on: September 06, 2009, 03:55:00 AM »
 ;D ;D ;D ;D

i just got back with a truck load of SPOOLS ...  ;D

I MEAN A FULL TRUCK LOAD ... AND IM BACK IN 2 DAYS FOR ANOTHER

THE ONES I PICKED UP WERE AROUND 3.5 TO 4 '  TALL AND THERE MOSTLY PLASTIC ...  ;D

I WAS GIVEN ALL THERE SPOOLS ...  8) 8)

I EVEN MANAGED TO TALK MY WAY INTO A STEEL SPOOL JUST THE SMALLER ONES AS THE BIGONES ARE 8' TALL AND HAVE A 600$ DEPOSIT ... THE SMALL STEEL ONE IS ABOUT 5' TALL

WILD TO SAY THE LEAST

AND I DONT WANT TO TALK ABOUT THE FREE COAX THAT CAME ALONG WITH THEM ....  ;D :D


AND I GOT SOME BAD NEWS .... I JUST MISSED OUT ON 30 OF THEASE  2 DAYS AGO

BUT ITS OK AS I GET ALL THE REST ... IT COST THEM 2000$ TO GET RID OF THE 30 I SPOKE OF ...

SHEESH ...


IST!

BTW THE SPOOLS IM TALKING OF 4 OF THEM FILL A HALF TONNE TRUCK ...  ;D

spools  ;D
« Last Edit: September 06, 2009, 04:27:03 AM by innovation_station »

innovation_station

  • Hero Member
  • *****
  • Posts: 5134
Re: IST'S FURNACE FAN PULSE MOTOR SELF RUNNING NO INPUT BATTERY
« Reply #6 on: September 06, 2009, 02:53:48 PM »
im already on it ...

just incase you thought i wouldnt build it...  ;D

ill add a picture of the rotor im building from 2 wire spools 1 plastic spool from fiber wire and a wood one  the darn thing is heavy and big  ;D

its bout 6" thick by 4' across

i have an axel and bearings i will mount it on ...

ill probally get a bigger spool and build the entire unit inside the bigger spool ..

ist

of course ill still build the smaller unit from the furnace fan ..

here are some pictures as EVERYONE LOVES PICTURES TOO LOOK AT!!

last picture is the bearings and axel i plan to mount it on ..

this came from a 30 hp induction motor ..

and the really big motor units i PLAN ON BUILDING

will be mounted to a trailer frame .. and built to be towed .. just drop it off ..  :D   with the electrican ..   ;) 

im goning to build a fleet of em  ;D

probally lease or rent them out ...  :)

ist ...  changeing this small rock in the universe...  8)
« Last Edit: September 06, 2009, 04:07:30 PM by innovation_station »

infringer

  • Hero Member
  • *****
  • Posts: 800
    • mopowah
Re: IST'S FURNACE FAN PULSE MOTOR SELF RUNNING NO INPUT BATTERY
« Reply #7 on: September 06, 2009, 05:06:34 PM »
I do not understand you claim this great thing yet do not give any explanation to the working or even a theory on how you believe it will work IST I love your flare and love for free energy movement but please don't leave us out of the loop of learning... I am at a stand still with my project until I get some mail or email to figure out the route I wanna take in the mean time I think this is a rather interesting project so please do tell how you expect this to work ...

Thank you sure title says pulse motor which is dandy how about telling us how you think this will work so someone could make the decision weather to follow this or not.

Thank You buddy,

-infringer

innovation_station

  • Hero Member
  • *****
  • Posts: 5134
Re: IST'S FURNACE FAN PULSE MOTOR SELF RUNNING NO INPUT BATTERY
« Reply #8 on: September 06, 2009, 05:38:54 PM »
ok

 ;D



here we go

this is easy ... so drop all big words and bs we all were tought ...

i will have a cap on my power source insted of a battery ...

i will use microwave magnets ...  most likely 24 around the edge of the spool this unit will stand vertical ..

i will use the END CAPS FROM THE ORIGNAL INDUCTION MOTOR TO SUPPORT THE MOTOR ..

ill add pictures of the parts i will use ..

there will be only 1 drive coil on this unit ... as i want to stay safe ... i dont want to run it too fast right off the bat!

i will use an old spool from speeker wire for my pulse coil  ill add the pic..

OPERATION OF THE MOTOR ....   i will only focous on the motor right now ...

i will after it is all assembled  give it a good push to start it ... 

the cap will be shorted to insure there is no power in the cap .. there will be if needed some aditonal collection coils around the outside of the rotor .. i can have lots if i so desire but i like simple and not too much work ..

each coil i will put there will be bridge rectified . then sent to the primary cap..

lets call it the primary cap for 2 reasons ..

it will power the primary drive electro magnetics  of the motor ... all ext coils will feed generated engery and colapse engery into the cap .. so if the motor goes round 5 full revolutions or less... it will have filled the cap enough to turn on the pulse motor circuit!!

 ;D

see simple ... 

yes indeed this is how simple it is to make a self running motor it is sad tho that i had to explain it ...  :(

ist

but its ok as i do not mind ..


« Last Edit: September 06, 2009, 07:01:31 PM by innovation_station »

innovation_station

  • Hero Member
  • *****
  • Posts: 5134
Re: IST'S FURNACE FAN PULSE MOTOR SELF RUNNING NO INPUT BATTERY
« Reply #9 on: September 07, 2009, 06:28:28 AM »
i have changed the rotor ..

i am makeing 2 units right away ...

 ;D

so my rotors consists of 3 wire spools this will build 2 pulse motors ..

1 wood spool 2 plastic spools ... 

each rotor has 3 peices to it  i will bolt the 3 as 1 rotor with a few bolts .. last thing i want is for it to  fall apart under high rpm ...

the rotors with out anything .. on them mesure 42" across each and 6 " there bouts thick

ill add up dated pictures tommorow ..  im moveing them into the shop to fasten the microwave magnets ..

1 rotor will use microwave magnets... i could probally fit 36 no problem around the edge ..
the other rotor is the exact same ..

it will have my 10 neos 1' wide by 2" long spaced evenly around the edge ... and ill test them both ..

I HAVE BUILT ENOUGH PULSE MOTORS TO KNOW MY OUT COME ...  ;)

IST!

BTW EACH ROTOR WEIGHS BOUT 120 LBS BARE AS THEY SIT...

innovation_station

  • Hero Member
  • *****
  • Posts: 5134
Re: IST'S FURNACE FAN PULSE MOTOR SELF RUNNING NO INPUT BATTERY
« Reply #10 on: September 09, 2009, 02:07:22 PM »
now i have showen the BIG ROTORS IM BUILDING ...

next im going to show

for the smaller rotors  the motor caseing i have built from an old wire spool

this unit is for my furnace fan motor i hope to finish the motor caseing today ...

i have almost all the required parts gathered up and ready to assemble ..

im happy with the way it turned out it is simple and looks darn kool and easy to adjust and assemble ..

ill add some picture of all the parts i used to make the caseing..

it is a 30" there bouts wire spool  it had 3 bolts holding it togather it had wood slats in the center ..

i then used a card board tube from the big spools i had to redrill the connecting bolts ..

not much to it ....

ist!

here is a picture of a wire spool i will use for a motor caseing ..
and here is the cardboard tube .. i will use for the caseing ...

this spool showen is not the exact same as i have already used ... this one has 4 bolts...
« Last Edit: September 09, 2009, 03:07:30 PM by innovation_station »

SkyWatcher123

  • Hero Member
  • *****
  • Posts: 844
Re: IST'S FURNACE FAN PULSE MOTOR SELF RUNNING NO INPUT BATTERY
« Reply #11 on: September 10, 2009, 08:00:24 AM »
Hi folks, Hi IST, you know I remember reading an article which may have been on Bedinis site or somewhere where a guy used a large heavy, round, wooden kitchen table top for a flywheel and it was powered by a 12 or 24 volt dc motor and 1 or 2 permanent magnet generators recharging a couple lead acids and all were connected by a belt and it was said this may have been self running. So maybe it is true after all that one can tap enough energy from a large enough flywheel to become self sustaining. Also another story of a test that showed a flywheel that required say as an example 100 watts to rotate up to a certain speed, then after a given length of rotation time is stopped and then started up again, it now only requires say 10 watts to rotate to same certain speed, although if you wait too long to rotate it up again the lower input effect is gone. This seems to suggest an effect like spinning water in a glass and it keeps spinning for a time, only in this case it must be the aether spinning or whatever we want to call what the flywheel is affecting in the space it sits. I think your motor has good possibilities.
peace love light
Tyson :)

innovation_station

  • Hero Member
  • *****
  • Posts: 5134
Re: IST'S FURNACE FAN PULSE MOTOR SELF RUNNING NO INPUT BATTERY
« Reply #12 on: September 13, 2009, 02:06:46 PM »
i have been working away on both thease units ...

ill add some more pictures today..

ist


innovation_station

  • Hero Member
  • *****
  • Posts: 5134
Re: IST'S FURNACE FAN PULSE MOTOR SELF RUNNING NO INPUT BATTERY
« Reply #13 on: September 17, 2009, 02:59:29 PM »
well i picked up a few more truck loads of spools ...  ;D

so ill get it built sooner than later

also i removed the rotor from the 30 hp induction motor what a job ... i had to grind it off it took me 3 days ... but i got it off

i have since picked up about 30 more spools .. some are quite large ... over 5 feet ..

here is a picture ..

ist!

MrMag

  • Hero Member
  • *****
  • Posts: 754
Re: IST'S FURNACE FAN PULSE MOTOR SELF RUNNING NO INPUT BATTERY
« Reply #14 on: September 29, 2009, 08:36:37 AM »
Well, I guess IST got his time machine up and running. :)