@a.king21, Why is Brazil supply any different to UK? In the UK it is called PME neutral and earth are bonded at meter and the mains cable in to house has just a single solid red wire up centre of stranded earth /neutral I cannot see how any power can be obtained I have tried. One weekend my earth leakage trip failed and I once ran my house with just earth rod and did not use the neutral for a month (could not get suitable replacement trip) but no gain, Meter still turns same rate even if you use just the live in to the house. Measure potential between earth and neutral nothing at all.
Regards
Keith

Dear Keith.

Our member aKing21 is referring to the HV transmission system not the LV one. Here in the UK we have a two wire HV feed to supply single phase pole transformers (Overhead Line). Apparently in other parts of the world they just use a single HV wire and pass that through the HV to LV transformer to the ground for the return path.

So it would be quite feasible to intercept some of that energy as it goes back to the main distribution sub station!! 

Cheers Grum.

SWER 
I also made the post because I checked with a known ou contributor to Patrick Kelly's free energy pdf.
He did the experiment in New Zealand when he was working with the Adams motor.
He managed to light an incandescent quite easily.


The system of SWER is also used in remote areas of the US.
Obviously the electricity companies do not want you to know this.


It may be that some Don Smith replications are in fact SWER systems.
It is also possible that some US inventors are keeping quiet about this fact, and their devices
are not free energy devices at all.


We have to have an open mind in the free energy development field.


I am studying Tesla, Benitez and following the posts of Tito L Oracion who
I am convinced has figured it out.
I am ignoring Barbosa Leal and keeping an open mind about Figuera, which is apparently
a Lenz fooling exercise by using split cores.
Just my 2 cents.
I am replicating Tesla devices just as Don Smith did. It's the only way to learn.
(The Igniter patent  and the Ozone patent 1886 to 1888)
If you look at the Kapanadze patents- it's essentially a make-break device using coils and caps.
In other words a radiant energy device.

@Grumage,a.king21, please post simple sketch showing what you are suggesting, as a sparks I cannot see how you can intercept either the supply or return to get any electricity out of grid. Even if you use current transformer on either wire ( in fact live, neutral, earth or earth ground) power still reads on supply meter . Unless interception is before pole transformer in which case just blatant stealing.
Regards
Keith

 Here is the latest Akula0083 4 coil toroid diagram, as well as a Russian Akula0083 dulpicator video link...
 
 
http://www.youtube.com/watch?v=Y7aBuptkUPA
 
and  Doris D & The Pins - "Shine Up" 1981 fun clip from my youth !!!
 
 Acca....
 
https://www.youtube.com/watch?v=htjM8vbMfUs
 

@Grumage,a.king21, please post simple sketch showing what you are suggesting, as a sparks I cannot see how you can intercept either the supply or return to get any electricity out of grid. Even if you use current transformer on either wire ( in fact live, neutral, earth or earth ground) power still reads on supply meter . Unless interception is before pole transformer in which case just blatant stealing.
Regards
Keith

Dear Keith.

Please find attached infantile !!      depiction of how you could possibly intercept a voltage that is returning to the supply.

Cheers Grum.

@Grumage, thanks for info good reading.
Regards
Keith

I think Kapandze is using a type of coil shorting, he's using a spark gap between the ends of a single wound coil, when the gap is conducting the coil is shorted when the gap is not conducting the coil releases its energy.

Look what Tesla is doing here he's shorting the bifilar wound secondary using a rotary spark gap.
Tesla also used two transformer's not directly connected but through capacitors, the load is not reflected back to the prime mover.
We can build this 
The energy in the first transformer is being conserved, no current actually passes to the second transformer the second transformer's primary is just being excited, but no induction or current transfer is taking place.
 
What did Tesla say "The future is mine" if you want to hide something you hide it in plain sight.
The oil pumping system is a nice distraction and was probably needed using iron transformers, imagine what he would have done with ferrite.

I dont see the secondary being a bifilar one, looks to me like a single wire coil, with each pole connected to one of the caps and the spark gap. Look how Tesla draw bifilar coils in his other patents. The oil pumping system Imho has the function of cooling the caps and output transformer (maybe needed to not detune the system due to heating), and controlling the shorting frequency of the secondary.