Author Topic: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze (Read 16497364 times)

Acca · « **Reply #18315 on:** July 25, 2013, 11:29:37 AM »

Wesley, here is a nuclear glass polish for the heavy lead glass link..
http://www.raybar.com/shld_info.htm
http://www.raybar.com/cntrl_wndws.htm[/url]
Lead Glass does not shield against thermal neutrons or fast neutrons
RAY-BAR X-RAY GLASS POLISH

Specially formulated for gently reducing or eliminating haze or hair-line scratches from soft x-ray lead glass surfaces, or refurbishing old existing medical x-ray glass windows and reducing surface "fogging",discoloration and oxidation from age for a clearer view of patients. Polish and applicator are included along with polishing instructions in this kit. Will not remove etches or deep scratches.
And my video on the piezonuclear effect.
http://www.youtube.com/watch?v=ba-FeswwGNQ[/font][/url]

Hoppy · « **Reply #18316 on:** July 25, 2013, 12:15:32 PM »

Quote from: anandml on July 25, 2013, 10:33:33 AM

Dear hoppy i have only one doubt please tell me why there is no loud noise at here on the video(05:38 and 08:35). Tk directly connects 230V supply from the grid to the primary of the step-down transformer at this time (05:38 and 08:35 from Tk's 2004 video).........

The noise will only occur if the two mains supplies are sufficiently out of phase when the device is switched-on. In the case of the 2004 video, I think that the mains plug is operating a latching relay that performs the function of S1 on my schematic. The mains supply feeding the lamps is brought directly through the inverter, so that when the inverter output plug is pulled-out, the lamps extinguish.

Zeitmaschine · « **Reply #18317 on:** July 25, 2013, 01:50:04 PM »

Quote from: NickZ on July 25, 2013, 07:28:15 AM

Although I couldn't find it now, I know that I've seen the video where TK shows what is in the tin can. It was an big iron core transformer, as I've mentioned previously. Of that I'm sure.

I would really like to see that !!

!!

Quote from: Hoppy on July 25, 2013, 08:37:37 AM

Why should it take out the inverter output stage as TK's inverter is most likely using a conventional iron transformer output. Anyone using an HF based electronic inverter for this type of application is sure to run into trouble.

Oh yes. On page 1222 we don't even know the type of inverter TK was using. Great progress, I would say.

Quote from: Hoppy on July 25, 2013, 08:59:50 AM

The video you refer to is faked!

But the spark is real. So we know how a real spark disturbs the measurements.

Quote from: Hoppy on July 25, 2013, 08:59:50 AM

Why should the lamp power dissipation be 5000W just because the five bulbs are rated at 1000W each, given that we don't know what voltage was being applied across the bulbs, as the guys meter measurement was fluctuating wildly?

If the voltage is the voltage of the mains grid then we should know the voltage. In other words: If the five lamps are connected to mains then the power dissipation is 5000 watts, if the five lamps are connected to the device then the power dissipation maybe only 4000 watts but nevertheless the device would be real.

Quote from: Hoppy on July 25, 2013, 08:59:50 AM

If you are expecting others to fill in the big gap in your schematic for you, then how will it be a replication of your proposal?

It would be a replication of a proposal based on my previous proposal.

Quote from: verpies on July 25, 2013, 10:05:33 AM

Spark-gaps are still a higher voltage and a faster ON-switches than any transistor. They are slower OFF-switches than transistors, though.
Single transistors above 1200V are hard to get and expensive and I have never seen a single transistor capable of switching more than 3kV.

But how could faster ON contribute to tapping into a hidden energy source (like the ground)? And why should it be necessary to switch the high voltage directly? Why not just switching the primary coil of the HV transformer with a transistor below 1000V?

Quote from: Hoppy on July 25, 2013, 12:15:32 PM

The noise will only occur if the two mains supplies are sufficiently out of phase when the device is switched-on.

What if the noise occurs because the output frequency of the inverter is out of phase with the resonator of the device (not mains) which is hidden in the tin can?

Quote from: Zeitmaschine on October 09, 2012, 12:10:43 AM

Now I have noticed the same random behavior during my experiments with a transformer, inverter and capacitors. My inverter (not transformer!) makes a humming noise when connected to the transformer and the capacitors. But not always. Without changing anything in the setup sometimes after connection the humming noise is there sometimes it is not. I think the difference is whether the connection is closed at maximum or at zero-crossing of the sine wave.

captainkt · « **Reply #18318 on:** July 25, 2013, 01:54:06 PM »

@Hoppy, just a quick note to say as soon as mains gets near inverter then bang it blows, I have ruined at least a dozen. Also HV near inverter just as bad. So when he self runs it (2004) I do not think mains is connected anywhere.
Regards
Keith

Hoppy · « **Reply #18319 on:** July 25, 2013, 02:01:25 PM »

Quote from: captainkt on July 25, 2013, 01:54:06 PM

@Hoppy, just a quick note to say as soon as mains gets near inverter then bang it blows, I have ruined at least a dozen. Also HV near inverter just as bad. So when he self runs it (2004) I do not think mains is connected anywhere.
Regards
Keith

Yes, it will blow HF based inverters.

Hoppy · « **Reply #18320 on:** July 25, 2013, 02:22:58 PM »

Quote from: Zeitmaschine on October 09, 2012, 12:10:43 AM Now I have noticed the same random behavior during my experiments with a transformer, inverter and capacitors. My inverter (not transformer!) makes a humming noise when connected to the transformer and the capacitors. But not always. Without changing anything in the setup sometimes after connection the humming noise is there sometimes it is not. I think the difference is whether the connection is closed at maximum or at zero-crossing of the sine wave.

You may have also noticed on the 2004 video that a humming noise could be heard before the plug was inserted into the mains outlet but at a much lower level than when the plug was inserted.

stivep · « **Reply #18321 on:** July 25, 2013, 02:36:01 PM »

Quote from: Acca on July 25, 2013, 11:29:37 AM

Wesley, here is a nuclear glass polish for the heavy lead glass link..
http://www.raybar.com/shld_info.htm
http://www.raybar.com/cntrl_wndws.htm
Lead Glass does not shield against thermal neutrons or fast neutrons
RAY-BAR X-RAY GLASS POLISH

Specially formulated for gently reducing or eliminating haze or hair-line scratches from soft x-ray lead glass surfaces, or refurbishing old existing medical x-ray glass windows and reducing surface "fogging",discoloration and oxidation from age for a clearer view of patients. Polish and applicator are included along with polishing instructions in this kit. Will not remove etches or deep scratches.
And my video on the piezonuclear effect.
http://www.youtube.com/watch?v=ba-FeswwGNQ[/font]

Thank you very very much

Wesley

Zeitmaschine · « **Reply #18322 on:** July 25, 2013, 05:00:25 PM »

Since -as it seems- we are looking for a) a non-ordinary transformer b) a way to suck electrons out of the ground, so what about this brilliant idea?

Two flybacks coupled with each other (mirror-inverted) connected to ground but the high voltage coils do not form a closed circuit. As there is no closed circuit but a grounded non-circuit, what are the physical laws in question here?

The ground is negative. Negative means a lot of electrons. The high voltage is positive. Positive means a lack of electrons. So the electrons in the ground are attracted towards the positive side of the flybacks through a coil. Simple in theory. But what could be the outcome practically? And what could be the difference if both flybacks would share the same core? Or if they are connected via a HV capacitor to form a series resonance circuit?

The basic idea here is to get a grip to the ground as power source without necessarily having an output of 220V/50Hz. For a start heaving an arbitrary (over unity) power output would be good enough (for me).

BTW: I think this will not work with DST flybacks (diode-split transformers) because the built-in diodes will prevent the resonance between the two transformers.

So, who can lead a blind man into the light?

P.S.: Could it be that this works (if at all) also with two mirror-inverted 50Hz step-up (step-down) transformers? The only requirement would be to have the apropriate high voltage in the open resonance circuit between them. If so, then this could be the Stepanov device.

vrand · « **Reply #18323 on:** July 25, 2013, 07:02:02 PM »

Quote from: Сергей В. on July 23, 2013, 01:28:21 AM

Привет всем !!

News from Reptilian's England !! Which can't be seen on any Western MSM. Interesting isn't it ?? Who have banned, for people of planet Midgard Earth ?? MI6 maybe ??

Original footage - From Reptilian Farm somewhere in Lancaster - ENGLAND REPTILIAN-ALIEN-TECHNOLOGY REPTILIAN-ENERGY-MULTIPLIER-IN-WORK.

Video made by my frend Joe XXXX !! Several hours after posting most interesting videos his channel and many Real Reptilian Video Proofs were wiped-out from JewTube.

Free download
http://webfile.ru/6613164

ps: You haven't any idea how much Reptilain Farms exist in England today !! Even in your nightmares !!. Folks these suffs are only soft things. Hard things which have happend in England you can't imagine. Real Nightmares !! 4million abductions in USA is not a MYTH !! Think about !!

ps2: Almost all Reptilian UFOs can't be seen by Human Eyes watching but any new Cameras and single-lens reftex cameras (photographic) can catch them without any problem.

Question: Why human eyes can't see it while cameras do ? Deduction logic said - Reptilians use PSY WEAPONS - PSY FORCE FILEDS for cover their material presence and their crimes. You watching in the sky and keep your spirit quite... there is nothing there but reality show us contrary. Conquered and Totally defeated .. even withouth any idea "WHY ??".

Buy samsung sdc-435 ir-security-camera and convince yourself personally.

Thank you for sharing that very interesting video and info on the Samsung video camera, keep up the good work!

Cheers

vrand · « **Reply #18324 on:** July 25, 2013, 07:10:47 PM »

Quote from: Сергей В. on July 23, 2013, 02:35:31 AM

Only for Experimenters

Гость УСТАНОВКА 2 kwatts on 220V
http://www.youtube.com/watch?v=gz0IPdPbHvA

Author (not ikako chubinidze) achieved 2kWatt output power with 100watts input.

Use Nanoperm stripes 2cm = about 0.78 inch wide.
Master ТДКС oscillator (HV-TV transformer with built in HV diode(s)) must be very stable and thermally compensated. Any industrial ШИИ (PCM) will be good here. Also you can use master oscillator based on microcontrollers and high speed mosfet drivers. For isolation use GDT gate drive transformers. Optics is too slow here. Schematics can be found on internet.

This circuit need very fine tuning and very sensitive is to pulse-with and Cкважность parameters.
Cкважность is our Russian term and means pulse period-to-pulse duration ratio or relative pulse duration.

S=1/D
D= duty cycle.

Use Aviation aluminium for tube. Diamtere 5 cm - 2inches. Bifilar was wounded in counter-plan. 1/2 half righ direction - other 1/2 left on whole lenght. Output power also depend from distance between Nanoperm windings. Tune it between 1-2.5 mm and keep the distance step constant. Use good Earth grounding. Heavy cooper bars deep in wet soil and check earth conductor with compass !!

Удачи !!

ps: It seems to me there only couple of CE people doing experiments. Other fishing in "troubled waters".

Thank you for this very interesting design!

Can I buy one to power my home?

There is a HUGE demand for such a device!

Cheers

anandml · « **Reply #18325 on:** July 25, 2013, 07:20:17 PM »

Inverter input is connected to the 220V AC grid power supply and it will be converted in to 12v DC (6-8 amps) for Battery charging with the help of stepped down transformer present inside the inverter.. Mysterious noise will be heard after making the device as a closed loop connection by step down transformer 12v placed inside the blackbox.....

What will happened if two 12 V step down transformer connect parallel to each other with primary input supply on both step down transformers---loud noise will develop or not?

elementSix · « **Reply #18326 on:** July 25, 2013, 07:58:22 PM »

I took out a CPU power suppl today and the Input is 120Volt 5 amps. The output is 5Volt and 16 amps. Now how is that possible. There must be something wrong for the amps to be 3 times what they are on the input side..

algavrik · « **Reply #18327 on:** July 25, 2013, 09:32:25 PM »

Quote from: Сергей В. on May 20, 2013, 09:45:48 AM

Официальное обращение к импортному производителю. Attention/ Letter of Akula free energy device to you

http://www.youtube.com/watch?v=YLWGl7gHdFc

THIS VIDEO OF AKULA WAS BLOCKED IN GERMANY BY JEWISH ILLUMINATI CABAL !! MAKE OWN CONCLUSIONS !!

Does anybody have a copy of this video? Really want to see it! Please share!

starcruiser · « **Reply #18328 on:** July 25, 2013, 10:58:56 PM »

Quote from: elementSix on July 25, 2013, 07:58:22 PM

I took out a CPU power suppl today and the Input is 120Volt 5 amps. The output is 5Volt and 16 amps. Now how is that possible. There must be something wrong for the amps to be 3 times what they are on the input side..

Typical transformer action, when down converting voltage you can increase the current, this is dependent on how you down convert the higher voltage. typical CPE PSU's are switching type, i.e. the line voltage is rectified then chopped and rectified again, the duty cycle is what governs the actual voltage.

Acca · « **Reply #18329 on:** July 25, 2013, 11:30:43 PM »

Soo.. there is "RADIOACTIVITY" around the Kapanadze unit.. As it is shown in this Russian clip..
http://www.youtube.com/watch?feature=player_embedded&v=5trV69lairk

And I thought maybe it's just HV intereference that is made by the fly back transformer, silly me !

And the Russians just dismiss this clip..... Well they just haven't seen the last 2 videos from Wesley....

Quote from their latest post about his clip.."
chiksat writes: ... Geiger sensor detects no gamma particles and their derivative stalknoveniya gamma and Malekula Air Ions.”

Link to the Russian froum below

http://next-energy.2x2forum.ru/t44p650-topic[/font]

News:

User Menu

Author Topic: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze (Read 16497364 times)

Acca

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

Hoppy

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

Zeitmaschine

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

captainkt

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

Hoppy

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

Hoppy

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

stivep

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

Zeitmaschine

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

vrand

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

vrand

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

anandml

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

elementSix

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

algavrik

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

starcruiser

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

Acca

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze