@all

Sorry for interjecting again on this thread. @stefan has put most all the TK threads into a new section and he put me down as moderator, but I never asked him to do that. I have now asked @stefan to remove me as moderator as I do not think this new TK section needs a moderator. But should any @member feel they would be a good moderator, you can always PM @stefan.

I had originally asked him to start a new section under a new title "Understanding Over-Unity" to which I would like to be the moderator. So there was a misunderstanding and hopefully it will be corrected shortly.

All the best in 2013.

wattsup

All the best to you.
Looking forward to your new home.

 

I feel dizzy.

C1 is 3µF, C2 is 1µF. (example values)

Negative cycle (voltage across the capacitors ends up negative)

T 0.00: Each of both capacitors are charged with 1V, positive plate on top.

T 0.00 to 0.25: The gates of VS3 and VS4 are in on condition. C2 discharges via VS4 through the coil T2.

T 0.25: The voltage across C2 is zero. Gates of VS1 and VS2 switched on. Gates of VS3 and VS4 switched off. VS4 stays conductive because of the current still flowing through it.

T 0.25 to 0.50: C1 discharges via VS2 through the coil T2. C2 is recharged by the counter current of T2 through VS4 in reversed polarity.

T 0.50: The voltage across C1 is zero. The voltage across C2 is -1V.

T 0.50 to 0.75: The collapsing magnetic field stored in T2 generates a counter current which charges C1 and C2 to -2V each.

Positive cycle (voltage across the capacitors ends up positive)

T 0.75: Each of both capacitors are charged with -2V, negative plate on top.

T 0.75 to 1.00: The gates of VS3 and VS4 are in on condition. C2 discharges via VS3 through the coil T2.

T 1.00: The voltage across C2 is zero. Gates of VS1 and VS2 switched on. Gates of VS3 and VS4 switched off. VS3 stays conductive because of the current still flowing through it.

T 1.00 to 1.25: C1 discharges via VS1 through the coil T2. C2 is recharged by the counter current of T2 through VS3 in reversed polarity.

T 1.25: The voltage across C1 is zero. The voltage across C2 is 2V.

T 1.25 to 1.50: The collapsing magnetic field stored in T2 generates a counter current which charges C1 and C2 to 4V each.

New negative cycle begins (at T 0.00) with a start-up voltage of 4V (instead of 1V) in each capacitor.

One question remains: How to generate the thyristor control voltage out of the LC circuit itself, so that the free running T1 oscillator is not needed and the control voltage stays always in sync with the resonance of the LC circuit? Then I could try if this actually works ...

You are all welcome to the new year ...

Actually the new year is the year One after we have survived the End of the World on Dec. 21. 2012 and actually it could be the year One for having Free Energy.

Hence adjust your calendars please and happy new year one.

freeenergyinfo, you are not tired to publish everything without thinking about its working? you brought to the forums so much garbage that harm from you is huge. many russian forums littered with your garbage, so now you've got over here.