Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze  (Read 16407674 times)

andrea76

  • Full Member
  • ***
  • Posts: 125
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #12300 on: July 11, 2012, 09:52:53 AM »
Please translate into all major languages as soon as possible. ::)

you can see three coils  in the vide at min 0:35.http://www.youtube.com/watch?v=90W00Yt_PLk.
probably in the others videos  the coils is UNDER the rotating discs.are Tesla Transformer?? the energy from the interaction of 2 T.T. is high frequency and KApanadze in the starting of his experiment did not know how to use it.(he used to rotate an alternator for the ac 50hz output).Continuing the experiments has be found that by coupling to an inverter he had an output of 50 hz and ................


sparks

  • Hero Member
  • *****
  • Posts: 2528
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #12302 on: July 11, 2012, 08:51:48 PM »
     The three things in the box in the preceding post are Tesla step-down coils.  They use an electrostatic displacement current to work.   As I said in a previous post the electrostatic displacement current is not your conventional electrons in a pipe flow.  This is open circuit design.  It has to be otherwise you will never ever ever get more in than out.  Put a capacitor in the middle of a circuit with two conductors extending out from the capacitor.  Charge the capacitor from a battery with an oscillscope attached to either end of the capacitor extended terminals by just mechanically closing the circuit.   See what appears there.  Then discharge the capacitor clip one end of the wire so it is shorter than the other.  Set your oscope to its highest frequency response.   See if you get a kick to show up on your scope.  You can use two identical lengths of iron wire and it will lower the frequency response range. start clipping one until a spike goes clear off the screen.  Then you get a little power from the ambient.  Meanwhile as you can see you are left with a fully charged capacitor you can dump back into the supply if you know how to build a voltage gain circuit so that a 4 volt charged capacitor can charge a 6 volt battery.

Jury1

  • Newbie
  • *
  • Posts: 49
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #12303 on: July 12, 2012, 09:15:08 AM »
Quote
…This is open circuit design…
My modest attempt to get the response of the medium using the principle of an open circuit…
http://www.youtube.com/watch?v=bEdNEFLrWWg
scheme of the device
http://s001.radikal.ru/i195/1207/ff/7a46e1d26bca.jpg

anandml

  • Full Member
  • ***
  • Posts: 107
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #12304 on: July 13, 2012, 03:46:45 AM »
HIGH VOLTAGE FREQUENCY FILTER:
(1)   The mains rectified 300V DC approx is switched on and off through a transformer.   The MOS-FET act as a switch.   The switching speed can be between 25kHz and 100kHz.   The PWM (pulse width modulator) controls the duty cycle of the switching frequency which is similar to a square wave that has variable width.   The transformer is specifically designed for switching frequencies of approx 50kHz.   High frequency transformers are very small and therefore have little mass.

(2)   The secondary of the transformer reduces the switched AC pulses to a lower voltage,   plus isolating the mains to ensure electrical safety.   The diode then converts the secondary pulses to the required polarity.   The secondary Electrolytic capacitor smoothes out the 50kHz DC pulses to an almost perfectly smooth DC supply.

(3)   The secondary Voltage is fed back into a comparator within the pulse width modulator (PWM).   The PWM then automatically adjusts the width (Duty cycle) of the turn on and off pulses to the power MOS-FET   which acts as the high frequency switch, controlling the current Amperes through the primary of the high frequency transformer,   which in turn corrects the voltage at the secondary to insure that the output DC Voltage is exact.

The high switching frequency gives the switch mode power supply a unique advantage of providing a near perfect ripple free smooth and regulated DC supply Voltage   that does not decrease in Voltage as extra current is required.

However switch mode power supplies are extremely complex.   The high switching frequency technology is in the Rf radio frequency band.   This causes major headaches to technically manage containing Rf radiation from the printed circuit tracks and connecting wires within the circuit getting to the outside world and causing Rf noise contamination in radio and TV.   Also the circuit operation is extremely fragile,   and if any fault occurs (no matter how small) it contaminates almost every sector of the circuit.

Switch mode power supplies are non user serviceable, failures are simply dealt with by trashing the power supply and purchasing a new one.   Attempting to service a switch mode power supply is virtually out of the question, except for fanatics who have infinite time.   The technology is so complex and fragile that reliable operation after 7 years is not always expected   but considered a blessing.   As the world converts to using switch mode power supplies and PWM Class D audio amplifiers, they will eventually end up as the dominant mass of rubbish land fills.

FreeEnergyInfo

  • Hero Member
  • *****
  • Posts: 501
    • FreeEnergyLT

dreamyear

  • Jr. Member
  • **
  • Posts: 76

Zeitmaschine

  • Hero Member
  • *****
  • Posts: 1267
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #12307 on: July 14, 2012, 07:50:43 PM »
Hi,
I want to focus on education making spark.
Kapanaze said that they managed to interrupt the spark one million times per second.
This can be done with a mechanical switch or electronic, as it did Kapanadze.
In my opinion free energy can be obtained only with proper arcing and eliminate BMF
I am trying to Rotary Spark Gap

success          madsatbg

p.s. I still have not OU ;D
doing experiments and looking
I using HV AC...
this is not for Free Energy, high interruption per second is for different effects - Tariel not telling all (think why?) but he not want to open a secret. don't focus on that so mutch ;)
Really? But maybe Free Energy PLUS »different effects« is nice to have too.

FIRST AND PRIMARY THAT WE SPOKE ABOUT IS THAT

-MOTOR in green box 


-Motor in Bed presentation with  metal can ( this one is to be placed inside can as a small one)
If you listen to the sound after power is disconnected there is little hiss one second after power is  off for the motor to stop.
Based on Niko that can was glued with silicon to do not move due to motor vibration.

- Motor in TENT  PRESENTATION ( 40KW_)


- Motor in Glass Table ( separate room)
-motor in "bed" presentation based on Nico is hidden in metal can with capacitor
- motor in presentation to me........ there was no motor but it was igniter with all of the spectral components of spark :)

All of the motors served as generators
all of the motors    have been carbon contact electric motors not induction motors.
All of the motors must of be used as generators of harmonics
I'm trying to think as simple as suggested: If there is a motor (in the tin can) then why not just for driving a rotary spark gap instead of creating some fancy harmonics? :o

I always wondered about Kapanadze's source for high voltage (in the can presentation). Maybe a small TV flyback driven by two transistors on heat sinks, then the high voltage is rectified, the HV-DC is chopped by hidden rotary spark gap, visible spark gap is connected in series.

Viewed more closely it makes no sense to connect a secondary high voltage coil made of 0.1mm wire (something like a flyback or inverter transformer) directly to a helical coil made of 5mm wire.

Secrets of Cold War Technology:

http://www.scribd.com/doc/15125148/Secrets-of-Cold-War-Technology

As it seems I have to build a rotary spark gap now.

Regards

AbbaRue

  • Hero Member
  • *****
  • Posts: 587
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #12308 on: July 14, 2012, 09:31:10 PM »
Found the Induction Heater circuit on another site. 
Contains more detail including value for MOSFETs.

Zeitmaschine

  • Hero Member
  • *****
  • Posts: 1267
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #12309 on: July 15, 2012, 12:50:35 AM »
Induction Heater? Strange, can't remember seeing anything molten in Kapanadze videos, especially not a molten earth cable that went right through the induction coils. Have I something misunderstood? ???

Regards

cheappower2012

  • Full Member
  • ***
  • Posts: 245
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #12310 on: July 15, 2012, 02:28:07 AM »
@Zeitmaschine,in the green box video TK says that a secret weapon's plans got stolen,
that's why he takes apart what he builds ,to guard it.Motor in can
sounds like total bullshit to me.The motor in the tent video is supplying shit its running from the power produced,look at the current readings.In the transparent box video the duration of the spark is
2 to 4 per second,also its a white flame indicating dc,no high frequency ac,the red coil is a flyback,
with a sealed rectifier and cap.In the transparent box video ,the frequency is 2 to 4 pulses per second falls short of the Schumann resonance explanation,OK guys patch up time,make it fit.
Schumann resonance for the operation of the TK device is silly.It appears to me that since the transparent box video,TK has made improvements
,transparent box>2004 video>green box video> 2007 video>turkey video.You have to concentrate on
green box video and 2004 video,which are going to be a basic model.This device I believe is very simple,
but very strange,its not a Tesla invention.Because its strange a conventional approach will fail,you asked how could an old man ,put togeither a free energy device,from a bunch of junk,the answer is a new principal is involved,that he discovered,this is not known in physics,because this principle is off the wall ,even if your a physicist  or an engineer your not going to figure it out.

AbbaRue

  • Hero Member
  • *****
  • Posts: 587
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #12311 on: July 15, 2012, 03:32:49 AM »
The schematic also mentions that this circuit can power a flyback transformer to high output. 
Many flyback drivers have 5 to 7 windings on the primary. 

FreeEnergyInfo

  • Hero Member
  • *****
  • Posts: 501
    • FreeEnergyLT
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #12312 on: July 15, 2012, 10:39:12 AM »
ROMANOV ...

Zeitmaschine

  • Hero Member
  • *****
  • Posts: 1267
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #12313 on: July 15, 2012, 01:15:46 PM »
Forget transparent box. It contains a lot of fake stuff for distraction only (maybe including the white spark).

In »Secrets of Cold War Technology« the DURATION of the impulse (spark) is considered to be of high importance, not its pure frequency. The simplest method to create a spark with short duration would be a rotary spark gap. In the green box video a humming noise can be heard. It's not coming from the light blue inverter, because it gets louder when the camera is pointed at the green box. Is it the fan on the green box? Maybe. But maybe the fan's only purpose is not to cool the transistors, but to obfuscate the noise coming from a motor hidden in the green box. :D

And what could be the meaning of the cryptic description »Points (as distributor of an engine)« in the patent specifications? Could be a rotary spark gap, couldn't it?

Anyway I'm through with all conceivable coil configurations (single wire, bifilar, trifilar, double bifilar, thin wire, thick wire, single layer, multilayer, high frequency, low frequency, mixed frequency) to no avail. So it's time for something new. (especially since cosmoLV suggests not to focus so much on spark creation)

Regards

FreeEnergyInfo

  • Hero Member
  • *****
  • Posts: 501
    • FreeEnergyLT
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #12314 on: July 16, 2012, 02:27:12 PM »