Lines, lines, lines. It's the nature of the universe. As well as the dot theory used in printing we can also apply that to any shape or form depending on the scale of the lines or dots.


 A general makeup of the lines I have attached. This is going back to my older theory and fits pretty well. These are not magnetic lines per say. These are electric lines. Magnetic lines are concentrations or condensations of free electric lines in the environment that are not aligned to the 90 degree support electric line.


 When you look at the http://en.wikipedia.org/wiki/Sierpinski_triangle go down to the section of Analogues in higher dimensions. To the right of that paragraph is the positive and negative particles shown in the picture with a red and blue triangle. Positive being full of space and negative being more neutral or passive. Each polarity must be skewed in some way that allows the direction of spin or each polarity. One is shaped slightly left and one is shaped slightly right.
 If you click the picture there is a very high resolution picture to see the orientation that makes the polarities all from the same gross shape(pyramid).

 Can we agree that matter does not generally touch on the smaller scales? If thats so then it must have infinite division at the smallest scales.

 If we look at the 3d triangle I have to think that the red is positive and the combination of the red and blue is the negative. The true blue pyramid is actually dark matter because it is true neutral. When you mix dark matter(blue) with the red you get the minimum charge level of our Universe. Since the red has infinite surface area you can transport insane amount of charges in that structure. when you couple that infinite charge with real matter(blue pyramid) you get real tangible detectable charged matter. The blue is by itself totally neutral.

 This is what I think these motors that Tesla was designing. Instead of doing them the way he designed they changed them and made them work with current. Why because thats what they are selling. Why would you make something that devalues your own product.

 Tesla's transformers were designed to keep the magnetic field inside of a core so that he could use the stiffened lines to generate or induce a value change in a central coil and core. He used the same process that a transformer uses except there was no connection needed between the primary and secondary. When you work with the fields since the magnetic field gets pulled into the core there is only the electric field left. This field is the sole reason why induction works. Learning how to make these lines very strong will give you all the energy in the universe as the lines cut the copper and excite the winds.

 The generation of just voltage isn't that intuitive and it has to be converted into usable current by polarizing the electricity. Tesla actually designed a few high voltage generators that didn't have the kickback that normal generators have. If you stay away from the heavy magnetic side everything becomes less powerful in the generation circuit. Then put that to induction coils around the rotor and you now have a concentrated bunch of lines cutting into the core and rotor windings.

 I stand with the latest drawings that I have made of the Kapandze system. The other one with the obvious Tesla coils is nothing more then a visual explanation of the process they are trying to sell as his own.

 As for the failures of others who tried to do the experiment with the tower that is because you didn't do it right. Having the antennas of the receivers will never be balanced. Each coil will have it's own field associated with it and putting the antennas like that and not evenly around the driving coil will net you nothing more then the first antenna sitting there. The field strength also would be very weak in small setups so the tolerances need to be tighter and less self influencing of each other. You also have to think that these are gears or the fields act gear like.

another scope

 The tower version is very simple to understand.


 In this picture we have 2 coils. A and B. C is the field of coil A. As the field builds further into the windings of B it creates a potential across the wires of the coil. This in turn creates a field in coil b. If it is oriented right it can repel the field from c and spin up to A's speed with compression of field C. This system is highly unbalanced as I have shown. It would need a complimentary coil on the other side of the field to create a better compression of the electric field around the drive coil A.

 The problem I see with kapandze is that he is trying to change the idea enough to be able to attach his own patent to the process. Since most countries only require 20% of the original patent to change in order to reissue a separate patent under the new or improved patent title.

 Ok back to the dynamics of this system. Generally the lines follow the origin conductors so winding left or right will change the outcome of the resulting direction to the field(from end to end of the hv coil. Remember my comments of corona discharges and how they look. The hint here being they are only intensified channels. These channels do not change the only thing you are changing is the intensity of them. This allows us to see them briefly.

P.S. There is no such thing as a closed circuit. Every circuit leaks and receives from the environment. Yes they have shielding but even that has leakage.

This might give you an explanation of this process. Or at least clues to the process.


http://www.youtube.com/watch?feature=endscreen&NR=1&v=x_CFLL68aZQ

 A better version.

http://www.youtube.com/watch?v=e6v01maAPN8&feature=channel&list=UL

 And this one shows you the kind of field that can self excite real matter. This excitation is what we are looking for in a heavy copper coil. The entire coil will be cut by the very thin lines of the Tesla coil on the very high voltage end or top. The electric field is greatest at the end of the coil with the highest value. Like wise the heavy current side or low voltage end is the current field. This is the driving mechanism that accelerates charges and condenses to a high voltage as it travels up the coil. The speed of the charges change and so does the density of the lines associated with that point on the coil.

 One of my better analogies is of a string of pearls strung on elastic thread. Now with longitudinal energy what you are controlling is the tension of the current. The higher the tension the more force it would take to divide the established network of pearls. Now apply my previos post about what lines look like and you can see how this works. The natural charge level keeps lines bount in a line. Anything below that disperses the particles or pearls and then can be rebuilt with any charges that were bound to the previous releasing.

 If we replace the pearls with pyramids you can see why nature is guided in certain fractal paths. The angles to which a network can form is very limited and a bit testy to be frank. When you raise any form of energy it usually ends up twisting into a coil like fashion. This is due to the non linear particles that make up the medium we live in. Around our point in the universe is a very dense electric field with a very big ground electrode to boot. It has been shown that the earth is very conductive to voltage stimulation. This means it is conducting into the point and gathering mass. This is why the earth is growing. We are condensing energy from the Universe every second of every day. We are filling up like a balloon with an absence of dark matter or primary matter. Matter displaces the dark matter by containing energy in some form and this usually creates a self sustaining flow for the matter to use to maintain it's detect ability.

 One thing that would help would be to use polarized glasses like effect and separate the frequencies we want to see even magnetic. We should be able to devise a way to see these fields and some have done just that. With plasma and High voltages they have been able to see the structures of these fields in action. With those experiments they saw dark matter for the first time. Where the boundry was between the high voltage(plasma, very intense bright light) and current(plasma dark or clear). The dark areas I suspect is the dark matter and it shadows us like an inverse or negative of our reality. This is a 90 degree shift when going from matter to dark matter. One doesn't effect much of the other induction wise but it can be bridged. This could be the reason why we have paranormal investigators. Some of the evidence there is irrefutable and some is bunk.

 It seems to me that the dark matter spectrum is subservient to the matter because matter displaces dark matter. The dark matter is there all the time except it doesn't actively run things. Matter runs the dark matter like a boat cuts the waves in the ocean. If there is an intelligence on that side of matter it would be of opposite logic to us. We are the gods then because we can do what they can not and need a vessel to make anything real in this world. They can enter if one wanted into our psych and enact change only if we let them. We are the gods. They have kept us down and out and always in the survival mode for far too long. We let them into our lives because we experience great tragedies or just becoming the beat stick for society. This is sad because we are all capable of more then this. Our potential is limitless. Our creativity unsurpassed and to them thats a beautiful thing they will never experience. So they use only what they have available to use, our own minds!

 They treat us like the proverbial elephant from birth. They chain us to their ideas and punish those who go outside of the box and we learn this. They tax us to death and even after as well. They step on our families like they were nothing and rip our souls to shreds. They corrupt our minds with junk that they push on us and no sight of the end is clear. Until we realize that we are the gods then we will die in obscurity like all the rest of the greatest thinkers and doers of our times.

Here is my theory what sr913 device is, very very simple.... it is a switch turning on/off magnetic field or rather permeability of core

Do you mean ?:
1) "switching" the absolute permeability of the core (μ = B/H) as in a Reluctance Switch or Flux Switch
2) "switching" the differential/incremental permeability of the core (μ_Δ = ΔB / ΔH) as in a Variable Inductive Reactance

@frantz, nearly all Kapanadze devises have two stages of start up. Possibly due to both HV and LV being used. When I am experimenting my devices do not simply start up without some switching or fiddling to get spark gap working.Also I would not expect device to stop instantly if it did then I would be suspicious.
Regards
captainkt

Do you mean ?:
1) "switching" the absolute permeability of the core (μ = B/H) as in a Reluctance Switch or Flux Switch
2) "switching" the differential/incremental permeability of the core (μ_Δ = ΔB / ΔH) as in a Variable Inductive Reactance

I think only experiments with working unit will give answer. Personally I think more like reluctance switch but not exactly.
Some videos proved that rings used in sr913 device are permanently converted into magnets, then demagnetized and then again converted into magnet of opposite polarity. This effect is imho the direct cause of ou, very initial time of creating magnet and destroying it.

Zeitmaschine thinks that devices with ferromagnetic cores are a different class of devices and Kapanadze's devices do not work according to the principles described by McFreey

This can only mean that Zeitmaschine "hat den Artikel überhaupt nicht gelesen".